Top Steering Gear Puller Reviews

Kauplus Harmonic Balancer Puller Set Flange-Type Puller Set Master Bolt Grip Set

  • Multiple use for removal and installation of harmonic balancers, gear puller, pulley puller.
  • Idea for remove harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys, capable of handling 2 or 3-way bolt pulling applications....
  • Set contains: (1) heavy duty forged three-way puller flange, (2) live-center forcing screws, (4) live-center adapters make a multi-functional....
  • Includes: 3 pieces of special shoulder bolts (1/4-28UNF x 3-1/4") for GM 3300-3800 V6 crankshaft pulleys.
  • Includes: (11) washer head hardened steel bolts (Grade 8): M8x1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x90mm, M10 x 1.5 x 35mm, 5/16-18UNC x 3.5",....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Orion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set

  • GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
  • COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
  • the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
  • DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
  • all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
  • SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
  • WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock