Top Steel Shank Reviews

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

Drill America 15/16\ Bridge/Construction Reamer with Magnetic Hex Shank and Black and Gold Finish, KFD Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

  • ✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
  • ✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
  • ✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
  • ✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..
Check Stock

TINVHY C1 ER32 4In Long Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder

  • 4Inch shank holding all ER32 collets (Clamping range up to 1In).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100

  • high speed steel, Tin Coating. Straight Shank.
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''.
Check Stock

High-k Gate Dielectrics for CMOS Technology

  • Boots for hazardous materials handling. Exceeds CSA standards for Di-Electric footwear. Steel toe, steel shank and steel midsole for complete protection..
  • NFPA 1991, 2016 edition compliant ASTM F2413-18, CAN/CSA Z195-12.
  • Specially formulated PVC allow protects you from some of the worst chemicals around while exceeding CSA standards for Di-Electric footwear.
  • Steel toe, steel midsole and steel shank Ultra grip Sipe outsole provides superior, slip resistance and protection.
  • Certified by S. E. I. to meet the requirements of NFPA 1991 Standard on Vapor-protective ensembles for Hazardous materials emergencies, Flash Fire certified.
Check Stock

5 Pack Drill Wire Brush Set, WENORA Wire Cup Brush for Drill 1/4 Inch Hex Shank, 0.012 Inch Coarse Carbon Steel- 3 Inch Wire Brush Drill Attachments

  • 3 Inch Wire Cup Brush Drill 5 Pieces - Suitable for working underneath cars and on relatively flat areas..
  • 【Production process upgrade】The WENORA Drill Wire Brushes are made of curled, untempered 0.012" carbon steel, upgraded from 60A carbon steel to 72A carbon steel, and upgraded in number and thickness (1-1.5 times) they are securely fastened to a securely designed cup-shaped metal holder that will not lose or bend during intense use..
  • 【Stronger 1/4” Hex Shank】1/4" (6.35mm) hex shank has better stability and is stronger than the regular round shank (6mm) and will not come off as easily as the round shank. Wire brush drill set can withstand the high speed of the 4500RMP..
  • 【More Durable Wire Brush for Drill】The standard 1/4 hex shank is compatible with most drill tools on the market,including a regular power drill as well as a pneumatic air drill, etc.Long-term use of the cup brush will not be asymmetrical and distorted..
  • 【Wide Application】The WENORA drill wire brush set for removing rust, finishing weld seams, polishing wood, and other-duty surface trea....
Check Stock

Utoolmart Round Shank Twist Drill Bits 1.5mm High Speed Steel 4341 with 1.5mm Shank 10 Pcs

  • 【Size】- Cutting Edge Diameter : 1.5mm / 0.06 inch.
  • 【High Speed Steel Tool】- High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • 【Round Shank】- Round shanks allow use with a wide variety of toolholding systems.
  • 【Uncoated Tools】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • 【Versatile Uses】- For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials.
Check Stock

Drill America 1-1/16 Hex Shank Black and Gold Long Bridge/Construction Reamer KFD Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
  • Point is tapered to permit entry into overlapping holes..
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools.
Check Stock

General Tools 5B Standard Circle Cutter, Adjustable 1-Inch to 6-Inches

  • General Tools circle cutters produce precision circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials.
  • The high-speed steel cutting blade adjusts to accommodate the thickness of your material.
  • Features a replaceable cutting blade and a replaceable 1/4 inch pilot drill.
  • This quality cutting machine will make circles from 1 inch to 6 inches in diameter.
  • Maximum safe speed is 500 RPM, for use with a drill press only.
  • This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more.
  • All adjustments are made with a hex wrench which is included.
  • Replacement blade is General Tools Model # 4/5 Blade, replacement drill is General Tools Model # 5/6/55 Drill.
  • General Tools circle cutters produce precision cricles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials.
  • This quality cutting machine will make circles from 1 ....
Check Stock

Impact Grade Driver Sockets, Mellbree Power Hand Tools Impact Driver Set 1/4 3/8 1/2\ Hex Shank Socket Adapter with 105 Degree Right Angle Screwdriver Magnetic Drill Bit Socket Adaptor

  • ...be extended to hard-to-reach places, suitable for small spaces, adding more usability. Built-in magnetic socket, with good holding power, connecting hexagonal bit is not easy to fall off. Apply to all electric drill and socket wrench..
  • Durable Material: Hex Shank Bit Sets are forged from heat treated chrome vanadium steel for exceptional strength. The 105-degree black plated steel drill is made of stainless steel and zinc alloy, and the surface is electrophoretic treated, which is brighter and not easy to wear, durable die casting body with 3 ball bearings to ensure stable connection and not easy to break. Black oxide layer for against rust and corrosion extends service life..
  • Package Contains: 1 pack 105° Angle Drill Adapter, 1 pack 1/4" hex shank to 1/4" socket adapter, 1 pack 1/4" hex shank to 3/8" socket adapter and 1 pack 1/4" hex shank to 1/2" socket adapter..
Check Stock

WORKPRO 3-Piece Step Drill Bit Set,1/4” 3/8” Universal Shank High Speed Steel Titanium Coated Drill Bits for Plastic, Sheet Metal, Aluminum Hole Drilling, Well-Organized Bag Included,SAE

  • Durable & Sturdy Material:High speed steel along with titanium coating ensures outstanding durability and sharpness for plastic, aluminum, copper, stainless steel hole drilling.
  • Two Flute & Tri Shank:Two-flute design provides faster, smoother, accurate cutting and prevents metal scurf from flying around for improved safety.
  • tri-flatted shank for a secure fit into power tool chucks, eliminating slip.
  • Universal Compatibility :1/4 “or 3/8” rods compatible with most power drilling tools.
  • Size: Bit #1 (6 steps 1/4″ shank):3/16″, 7/16″ 3/16″,1/4″,5/16″,3/8″,7/16″,1/2″.
  • Bit #2 (9 steps 3/8” shank): 1/4″,5/16″,3/8″,7/16″,1/2″,9/16″,5/8″,11/16″,3/4″.
  • Bit #3 (16 steps 3/8” shank): 1/4″,5/8″,3/8″,7/16″,1/2″,9/16″,5/8″,11/16″,3/4″,13/16″,7/8″,15/16″,1″,1-1/16″,1-1/8″,1-3/16″,1-1/4″.
  • A well-organized bag included to provide users with easy storage and transport.
Check Stock