Top Steel Hose Assemblies Supplier Reviews

Apache 98108455 3/4\ x 12' Farm Fuel Transfer Hose with Static Wire

  • A lightweight, flexible hose for use when a hardwall hose is inappropriate.
  • Recommended for all gasohol blends, diesel, leaded, unleaded gasoline, E15 Ethanol and B-20 Biodiesel.
  • Excellent strength without sacrificing flexibility.
  • All curb pump hose assemblies are 100-percent pressure tested, inspected for electrical continuity and sample pull tested.
Check Stock

OTC 5285 1,650 lb. Capacity Air/Hydraulic Power Train Lift

  • OTC's 1,650 lb. capacity Powertrain Lift is perfect for handling engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
  • Scissors-type design allows access to all 4 sides of a component for supreme accessability.
  • Two independent adjusting screws tilt the table 15 degrees side-to-side, or fore and aft and can be operated manually or with a non-impact air wrench.
  • Air/hydraulic operation via a foot control pump that features a flexible hose allowing movement around lift.
  • Features a 20 x 32 inch table, 8-inch high capacity swivel casters, a minimum height of 31-1/2 inches with a 74-1/2 inch maximum height, and a footprint that is 33 inches wide x 48 inches long.
Check Stock

DSS40 - Crushproof Tubing garage exhaust hose service station kit, 4" ID.

  • Crushproof Tubing garage exhaust hose service station kit, 4" ID..
  • Includes one 6' length of 4" hose, two 4' lengths of 4" hose, Y connector, splice connector, and two F400 adapters..
  • Y-assemblies are designed to convert a single exhaust hose into a dual kit..
  • Bundled savings versus buying all pieces seperately..
  • Will withstand temperatures of up to 600 degrees F..
Check Stock

4\ Hose Hangers - 5 per Pack

  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

InSinkErator Wave Instant Hot and Cold Water Dispenser System - Faucet & Tank, Chrome, HC-Wave-C

  • 2 spring piston handle assemblies with auto-off hot and locking cold levers.
  • 9-1/4 in. overall height with 4-1/2 in. gooseneck spout projection.
  • 1/4 in. compression stainless steel flex lines and Santoprene hose outlet to tank.
  • Quick heating water tank (QHT) - REQUIRED! SOLD SEPARATELY.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • ...here the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Brake Pads 003e All Hardware To Install.
  • Parking Brake Cable Kit: 003e Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit: 003e Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines 003e Also includes weld-on line tabs | Hard Line Kit: 003e Steel hard brake line tubing to connect the chassis fittings to the included rubber hose 003e Rubber hose connects those hard lines to the line on the frame.
Check Stock

Edelmann 70551 Power Steering Return Hose

  • Original equipment equivalent assemblies.
  • Manufactured using nitrile tube and oil-resistant synthetic rubber cover.
  • Manufactured with a special chlorinated polyethylene (CPE) tube with a temperature capacity of up to 300 degrees Fahrenheit.
  • Mounting brackets, heat shields and convoluted sheathing to protect the hose are included where applicable.
  • 3/8 inch male inverted flare x 3/8 inch i.d. hose.
Check Stock

Edelmann 70518 Power Steering Return Hose

  • Original equipment equivalent assemblies.
  • Manufactured using nitrile tube and oil-resistant synthetic rubber cover.
  • Manufactured with a special chlorinated polyethylene (CPE) tube with a temperature capacity of up to 300 degrees Fahrenheit.
  • Mounting brackets, heat shields and convoluted sheathing to protect the hose are included where applicable.
  • 3/8 inch male inverted flare x 3/8 inch i.d. hose.
Check Stock

Dorman 626-557 HVAC Heater Hose Assembly Compatible with Select Models

  • Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer.
  • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 626-565 HVAC Heater Hose Assembly Compatible with Select Volkswagen Models

  • Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer.
  • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 626-104 HVAC Heater Hose Assembly Compatible with Select Chevrolet Models

  • Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer.
  • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 626-524 HVAC Heater Hose Assembly Compatible with Select Audi/Volkswagen Models

  • Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer.
  • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 626-569 HVAC Heater Hose Assembly Compatible with Select Chevrolet / GMC Models

  • Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer.
  • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock