Top Steel Forgings Shaft Reviews

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Accusize Industrial Tools 1'' R8 End Mill Holder Tool Adaptor Milling R8 Shank Bridgeport, 0222-0847

  • Ground shank and hole, heat--treated for durability.
Check Stock

Accusize Industrial Tools 1/2'' R8 End Mill Holder Tool Adaptor Milling R8 Shank Bridgeport, 0222-0843

  • Ground shank and hole, heat--treated for durability.
Check Stock

Wiseco CK104 81.0mm 13 1 Compression Ratio 4-Stroke Motorcycle Top End Piston Kit

  • Dedicated forgings are used for superior strength to weight ratio utilizing aerospace alloy with a dome designed for improved flame travel and....
  • Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require.
  • Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for....
Check Stock

Silvolite Hypereutectic Dish +.030\ over size Pistons & MOLY Rings compatible with 2004-2007 GM 5.3L LM7 L59 LM4 Engines (+.030 3.810\ Bore)

  • Fits: All Harley-Davidson Shovelhead engines 1978-1984.
  • 80 cubic inch (1340 cubic capacity) kit includes 7:1 compression ratio domed pistons, rings, circlips, chrome piston pins.
  • Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application.
  • Dedicated forgings are used for superior strength to weight ratio utilizing aerospace alloy with a dome designed for improved flame travel and detailed skirt shape and profiles for stability and smooth operation in the cylinder bore.
  • Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require.
Check Stock

Putters Kids Junior Stainless Steel Club Putter 31inch Mini Rubber Head Putters for Children Ages 3 5 6 8 9 12 (Blue) Kids Putter Two Way Putter

  • Stainless steel shaft + imported anti-slip rubber grip,shaft flex: Regular.
  • The benefits of this graphite children's golf putter: Shaft lighter, more flexible, more loft, faster club head speed, easier to play, durable, -resistance and sturdy construction, suitable for golf beginner with less strength.
  • Low center of gravity design to increase the accuracy and fun of hitting ball.
  • For 18-hole mini course, indoor putt practice, putter exercise for children..
  • This kids golf club can withstand everyday training and practices either on a real golf club or indoors on a putting green and give you superb control.
Check Stock

HEART ART Black Shelf Bracket 6 inch, J Metal Heavy Duty Shelf Support Brackets 4 Pack,6.3\L×4.8\H×1.2\W

  • Material: Cold-rolled steel forgings, not easy to deform and rust, with stainless steel screws, better bearing capacity..
  • Size: The exact outside dimensions are: 6.3''Lx4.8''Hx1.2''W, suitable for a variety of 6" width shelves..
  • Feature: Embedded screw holes are reserved on the bracket, after the installation is completed, the surface is flat without protrusions, which is more beautiful..
  • Load Bearing: The load-bearing capacity of the bracket is also different depending on the installation of the wall. On concrete or brick walls, the maximum load is 80LBS. On the wooden wall, the maximum load is 45LBS..
  • Design: Easy-to-install design using basic DIY tools Can place decorative items on the shelf to decorate your home.
Check Stock

WEISHUJI Universal Stainless Steel Centre Drive Shaft, Stainless Steel Centre Drive Shaft, Stainless Steel Drive Shaft 140-250mm for Tamiya RC4WD D90 SCX10 SCX0016 Off-Road RC Crawlers Car

  • Universal Stainless Steel Centre Drive Shaft is compatible with HSP 94180 RC 1:10 racing climbing rock crawler, Stainless Steel Drive Shaft is also compatible with Axial SCX10 Electric 4WD RC Car..
  • Universal Stainless Steel Centre Drive Shaft length range is 140mm-250mm, Stainless Steel Centre Drive Shaft Hole Size is approx 5mm/0.20inch..
  • Universal Stainless Steel Centre Drive Shaft General Diameter is approx 12mm/0.47inch..
  • Universal Stainless Steel Centre Drive Shaft Axle Body Diameter is approx 10mm/0.39inch..
  • Package of Universal Stainless Steel Centre Drive Shaft includes: 1 x Stainless Steel Centre Drive Shaft.
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

XIAOSHI 2-Sets 8mm 100mm Case Hardened Plated Steel for Linear Motion Rods Shafts Guides

  • Linear Motion Shaft: /Diameter: 8mm /Length: 100mm /Material: Stainless Steel /Hardness: Surface hardness-55-60HRC.
  • Hardened layer-0.8mm /Surface treatment: Chrome Plated,Smoothness Ra0.8.
  • Horizontal Shaft Holder: /Material: Aluminum Alloy /Compatible Model: SHF 8A /Shaft Diameter: 8mm /Locking Bolt: M4 /Clamping Bolt: M5 /Dimensions: 43*10*5mm (W*L*T).
  • Linear Slide: /Material: Bearing steel /Slide Bush Method: LM8UU /Dynamic Basic Loading: 274CN /Static Basic Loading: 392CON /Dimensions: 34*30*22mm (W*L*F).
  • This linear motion shaft of 8 mm in diameter and in different Length is steel plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications..
  • Package Included: /2 x Linear Motion Shaft /4x Horizontal Shaft Holder /4x Linear Slide.
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (6.1mm)

  • EASY TO USE: Pattern edge of shaft lock collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • REUSABLE: Shaft lock ring has carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • CONVENIENT: Shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • DURABLE: Lock shaft collar adopts appearance plating process, no rust, no scratch, with good performance and long service life..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs..
Check Stock

VGEBY Bicycle Pedals 2pcs Mountain Bike Pedals Non‑Slip Aluminum Alloy Bicycle Platform Flat Pedals

  • Lightweight and durability -- CNC aluminum alloy body, strong and durability. Integrated cutting process, lighter weight, and integrated cutting is not easy to break..
  • With 5 anti‑skid nails -- Stainless steel anti‑skid nails grab the feet and have 5 anti‑skid nails on each side to strengthen the grip and make riding easier..
  • Professional design -- 14mm universal threaded port, chromium‑molybdenum steel shaft universal interface, easy to install, the shaft is firm and not easy to loosen..
  • Waterproof and dustproof -- The sealed shaft sleeve is waterproof and dustproof, anodized, it is not easy to rust, and it is not afraid of daily wind and rain..
  • Good performance -- Chrome‑molybdenum steel shaft, built‑in nylon DU shaft sleeve, high‑speed bearing, saving effort during riding..
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock