Top Steel Fasteners Reviews

Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45

TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..

Check Stock

Interstate Pneumatics TRB750K 2 in 1 Thread Locker Kit Includes High/Medium Strength 50ml Each Bottle

Lock Threaded fasteners from loosening during shock and vibration, Single component with no curing outside of threads, TR750 - Ideal for 1/4" and 1" diameter nuts and bolts, TB750 - Ideal for 1/4" and 3/4" diameter nuts and bolts, Cures in the absence of air without cracking and shrinking, prevents rusting of threads, Can be removed with hand tools, Permanent seal prevents tampering.
Prevents loosening of metal fasteners caused by vibrations, Torque Breakaway on 3/8” Steel (TR750): 190 in-lb, Torque Prevailing on 3/8” Steel (TR750): 275 in-lb, Torque Breakaway on 3/8” Steel (TB750): 45 in-lb, Torque Prevailing on 3/8” Steel (TB750): 100 in-lb, Size: 50ml (1.69 Fl Oz), Fixture Time: 10 min., Full Cure Temperature (°F): 77, Full Cure Time: 24 hr..
Recommended For: TR750 - Use on metal fasteners up to 1” (25 mm) in diameter such as bolts on decks, ready-to-assemble furniture, mounts, rings, gear bolts and frame bolts, TB750 - Use on metal fasteners 1/4" (6 mm) to 3/4" (19 mm) in diameter such as bolts on small engines, swing sets and furniture.
Not Recommended For: Use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials, Use on plastic parts, particularly thermoplasti....

Check Stock

Harley Fasteners Hard Saddle bags Mounting Pin Stud Bolts Fits For Harley Davidson Touring Softail Road King Electra Glide FLHX FLHR FLHS

FITMENT : Fasteners Hard Saddle Bags Mounting Pin Bolts Fits for Harley Davidson Touring Softail Road King Electra Glide.
Material : Steel and chromed finished of the fasteners.
Package Included : 4 x fasteners and 4 x washers (Installation instructions not included.).
100% Brand new and high quality fasteners，Not Fit for 1987 Davidson FLHTC.
Bail head fasteners and receptacles allow you to fasten your saddle bags to the bike with a simple twist.

Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

[Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
[Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
[Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
[Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
[Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..

Check Stock

(400 pcs) 1/8\-27 X 5/16\

Superior quality parts by Holo-Krome, made in the U.S.A..
Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
An internal hex socket drive is also known as an Allen drive..
Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..

Check Stock

(100 pcs) 1/4\

Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
An internal hex socket drive is also known as an Allen drive..
Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..

Check Stock

Craftsman V-SERIES Hex Key Allen Set, MM, 9 Piece (CMHT26139V)

EXTRACTION - X-Tract Technology designed to remove fasteners up to 50% rounded.
ROUNDING PREVENTION - Designed to help prevent rounding and stripping of new fasteners.
DURABILITY - Premium S2 Steel for advanced strength and durability.
ACCESS - Ball-end offers angled access to hidden or hard to reach fasteners.

Check Stock

Cruiser Accessories 81500 Locking Fasteners License Plate Frame Hardware, Ultimate Kit-Stainless Star Pin

Our Ultimate Kit is a one stop shop of the best license plate frame hardware on the market, especially if you are unsure if your license plate requires standard or metric hardware.Fit Type: Universal Fit.
This hardware kit includes both standard and metric size locking stainless Star Pin fasteners and Rattle Stop hardware to provide everything needed to deter your license plate frame from being stolen and take the 'rattle' out of your license plate.
Designed to fit all novelty/license plates for domestic or import vehicles.
Includes four (4) Rattle Stop fasteners, four (4) 1/4 x 3/4 inch fasteners, four (4) M6 x 20mm fasteners, four (4) M5 x 20 mm fasteners, eight (8) plastic washers, four (4) lock nuts, four (4) plastic nut grommets and one (1) special Star Pin key for installation.
User friendly and easy to install, see back of package for installation instructions.
The combination of the pin in the center with the special Star Pin key makes it impossible to remove the screws with a typical allen wrench.
These fasteners are made of stainless steel.
Designed to fit all standard novelty/license plates.
Easy to install (illustrations on back of package).

Check Stock

#10 x 3 Inch 316 Marine Grade Stainless Steel Wood Screws 1500 Pack T25 Star Drive Type 17 Point for Docks, Decks, Jetties, Fences or Any Coastal Marine Construction by Eagle Claw Fasteners

TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..

Check Stock

#10 x 3 Inch 316 Marine Grade Stainless Steel Wood Screws 350 Pack T25 Star Drive Type 17 Point for Docks Decks Jetties Fences or Any Coastal Marine Construction by Eagle Claw Fasteners

TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..

Check Stock

25pcs 1/2X6 Anchors Toggle Bolts and Wings Toggle Bolts Round Head

Volume Price Breaks Available. Contact Aspen Fasteners.
Aspen Fasteners stocks over 300,000 different fasteners for immediate delivery. Also, through our partners we have access to virtually every fastener type.
Standard and specialty items by print. If you have any questions or can't find what you are.

Check Stock

Prime-Line MP11383-2 Strap Hinge 2 Piece

All components of these hinges are constructed of steel, hinge leafs, hinge pins and fasteners.
All components come in a corrosion resistant, black painted finish, to include the hinge pins, leafs and fasteners.
Designed for use with small gates, lids, cabinets, chests and small swinging doors.
Feature four offset mounting holes per leaf, with tapered edges to allow for flush fitting fasteners.
Easy to install with only a few simple tools.

Check Stock

Prime-Line MP11134-1 Pin Hinge

All components of these hinges are constructed of steel, hinge leafs, hinge pins and fasteners.
All components come in a corrosion resistant, oil rubbed bronze plated finish, to include the hinge pins, leafs and fasteners.
Designed for use with interior hinged swinging doors.
Feature three offset mounting holes per leaf, with tapered edges to allow for flush fitting fasteners.
Easy to install with only a few simple tools.
For further dimensional and specification information, please see the line drawing.

Check Stock