Top Steel End Fitting Reviews

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 2\ Tube OD to 1-1/2\ Tube OD

• Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
• Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
• Stainless steel 304 for resistance to corrosion and high temperatures.
• Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
• Ferrule Size(38MM end):51mm ferrule fits 1.5" tri clamp.

QiiMii Sanitary Fitting Reducer Fitting SS304 Tri Clamp Ferrule Style 3\ Tube OD to 2\ Tube OD (3 INCH X 2 INCH )

• Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
• Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
• Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
• Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
• Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.

6 Pieces 1.5 Inch Sanitary Fitting Cap Stainless Steel 304 Sanitary End Cap Pipe Fitting Clamp Solid End Caps Blind Tri Caps Clamp for Dairy Products Food Wine Beverage Cosmetics Engineering

• What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance.
• Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life.
• Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection.
• Sealing performance: this stainless sanitary fitting cap has good sealing performance, it is clamping on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access.
• Widely use: these stainless steel end caps can be applied in the dairy products, food, wine, beverage, cosmetics, mechanical and electrical engineering, mechanical manufacturing and and other sanitary process industries.

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

• ...ure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
• Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
• However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
• however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
• Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
• Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.

SKS Leather Sling Russian Bulgarian Yugoslavian Polish Romanian Chinese AK 47

Surplus Chinese PLA 7.62mm SKS Sling Green

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

• {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
• {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
• {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
• {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
• {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....

Dixon Air King RAM0 Stainless Steel 316 Air Hose Fitting, 2 Lug Universal Coupling with Blank End

• Blank end fittings have no outlet and are used to block the line at any coupling point.
• The end opposite the coupling head is flat, with an eye for a chain to secure the fitting when not in use.

2 PCS 10-1/2\ Shelf Bracket Fitting Strut Connector Brace Fittings, Metal Strut Channel Joiner Support Fit for 1/2\ Bolt in 1-5/8\ Strut Channel, Steel Electrogalvanized

• 10-1/2" Bracket Fitting Strut Connector, Steel Surface Electrogalvanized.
• Fit for 1/2" Bolt in 1-5/8" Strut Channel.
• Hole Diameter: Ø9/16"(14mm), Width: 1 5/8"(41mm).
• Hole Spacing from End of Fitting: 13/16"(21mm).

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

• {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
• {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
• {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
• {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
• {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.

GasOne 50143-08 16.4 oz to 20 lb Tank QCC1/ Type 1 8 ft Propane 1lb to 20lb Adapter Hose

• CONVERT YOUR CONNECTION - For the moments you feel that a 16. 4oz propane tank just isn’t enough, Gas One’s 1 to 20 lb. steel braided propane converter (8ft) allows for 1lb propane adapters to be used for 20lb propane tanks!.
• SAVE MONEY WITH THIS ADAPTER - Instead of buying multiple single pound (16. 4oz) propane cylinders and straining your wallet, use Gas One’s 50143-08 converters to utilize your 20lb tanks for your previously incompatible propane appliances. Each cylinder saved is money in your pocket!.
• STURDY BUILD - Installed with a brass fitting and a durable steel braided hose, the 1 to 20lb adapter ensures long term usage with consistent output/efficiency.
• EASY HASSLE-FREE INSTALLATION - Ready for use right out of the box, all the 1 to 20lb adapter needs is a simple, easy installation. Connect the end with our new durable red plastic connection to your larger propane tank and connect the other end to your original 1lb propane adapter. This will convert the 1lb adapter to a 20lb type fitting and will immediately start saving you money, space, and time!.

Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

• 【INSTALLATION KIT FOR BACKSLASH MOUNT】This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
• 【1/2 IPS STRAIGHT THERAD】it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end.
• 【LEAK FREE】its one-piece construction for no leaking.
• 【EASY TO INSTAL】Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet.
• 【SOLD IN PAIR】comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2.

Stanbroil 3/8 X 36 Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

• Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
• 3/8" OD x 1/4" ID 36 inch Stainless steel pipe coated black gas line with fittings.
• 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
• CSA certified, fit for NG or LP fireplaces and .
• There is a staggered pitch every 2" to Eliminate Whistling.