Top Steel Double Head Reviews

Double Whisk Milk Frother, Handheld Electric Blender stick, Drink Mixer with Food Grade Stainless Steel Stirrer, Battery Operated Foam Maker for Coffee, Cappuccino, Frappe, Matcha, Hot Chocolate Latte

  • 【 UPGRADED DOUBLE WHISK NEW GENERATION 】--We upgrade the traditional one coil rotor head to the double coil rotor head, which can stir richer milk foam faster. And the rotor head is made of safe food grade stainless steel, always taking care of your health.The powerful motor high speed motor rotates stably with low-noise. Compared with the previous generation of single coil rotor head, the upgraded double coil rotor vibrates very little when rotating..
  • 【 MAKE CREAMY FROTH IN SECONDS 】--Double whisk milk frother makes our coffee lovers get satisfied coffee faster. Powerful high speed motor drives the whisk to stir milk to be frothed milk in an instant. What a great fun to have your own electric foam maker, that only you know what taste you want! This Exquisite frother is nice home kitchen gadget for coffee lovers..
  • 【 STYLISH SOPHISTICATED DESIGN 】--The silver button and black body are simple and fashionable. Lightweight and Portable device with trendy style is easy to place next to coffee accessories in any kitchen and easy to use at home or outdoors. Just 2 AA batteries (not included), no cords and sockets required. The perfect gift for coffee lovers for....
Check Stock

Generic 12\ Combination Square Set 4Pcs 4R Graduation Stainless Steel Ruler Tools

  • Set Includes: 12-Inch Stainless Steel Rule, Protractor Head, Square Head, Center Head, Scriber, and Storage Case..
  • Hardened Cast Iron Steel Heads with Reversible Lock Bolts.
  • Direct Reading Double 180 Degree Protractor Scale.
  • Ruler Graduations: 1/16 in. and 1/8 in, up to 12in..
Check Stock

DEWALT Planer Blades for DW735, 13-Inch (DW7352)

  • M2 laminated tool steel of DEWALT planer blades stays sharper and lasts longer than conventional knife materials.
  • Machined locator holes help users align knives on cutter head during knife change.
  • Generates a snug fit around pins on cutter-head.
  • M2 laminated tool steel stays sharper and lasts longer than conventional knife materials.
  • Machined locator holes help users align knives on cutter-head during knife change.
  • Cost effective alternative to sharpening.
Check Stock

KAKURI Chisel Hammer GENNO 8 oz (225g) Japanese Woodworking Carpenter Hammer for Chisel, Plane, Nail, Heavy Duty Japanese Carbon Steel, Bronze Plated Octagonal Head, Wood Handle, Made in JAPAN

  • JAPANESE HAMMER WOODWORKING TOOL: It is a high-quality Japanese hammer called GENNO, ideal for adjusting planes, chiseling, and nailing. The head part is made of Bronze-finished high-grade Japanese carbon steel.
  • it features a heavy-duty head and a beautiful appearance..
  • DOUBLE FACED OCTAGON HEAD: A dual head supports your woodworking. One side is flat, and the other is slightly domed. When nailing, start to nail with a flat face and then striking it with a dome-shaped surface to finish it. By doing so, the surface of the wood is not damaged. Since it is a octagonal head, you can also use the sides of the head to nail in tight spaces..
  • HEAVY DUTY DOUBLE WEDGE: As the wooden wedge and the iron wedge are driven in a cross, the head and handle are firmly fixed, making the hammer heavy-duty. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen..
  • COMFORT WOOD HANDLE: The wooden handle is made of natural Japanese oak wood that fits comfortably in your hand. It has a hard, comfort surface finish that gives a feel..
  • PRODUCT SPECIFICATIONS: Made in Japan / Size:12.9×3.0×0.8 inches / Head weight: 115 g / Weight: 11.1 oz / Head thickness: 21 mm / Head: Japanese carbon steel (bronze plated) / Handle: natural oak wood.
Check Stock

KAKURI Chisel Hammer GENNO 4 oz (115g) Japanese Woodworking Carpenter Hammer for Chisel, Plane, Nail, Heavy Duty Japanese Carbon Steel, Bronze Plated Octagonal Head, Wood Handle, Made in JAPAN

  • JAPANESE HAMMER WOODWORKING TOOL: It is a high-quality Japanese hammer called GENNO, ideal for adjusting planes, chiseling, and nailing. The head part is made of Bronze-finished high-grade Japanese carbon steel.
  • it features a heavy-duty head and a beautiful appearance..
  • DOUBLE FACED OCTAGON HEAD: A dual head supports your woodworking. One side is flat, and the other is slightly domed. When nailing, start to nail with a flat face and then striking it with a dome-shaped surface to finish it. By doing so, the surface of the wood is not damaged. Since it is a octagonal head, you can also use the sides of the head to nail in tight spaces..
  • HEAVY DUTY DOUBLE WEDGE: As the wooden wedge and the iron wedge are driven in a cross, the head and handle are firmly fixed, making the hammer heavy-duty. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen..
  • COMFORT WOOD HANDLE: The wooden handle is made of natural Japanese oak wood that fits comfortably in your hand. It has a hard, comfort surface finish that gives a feel..
  • PRODUCT SPECIFICATIONS: Made in Japan / Size:11.8×2.3×0.6 inches / Head weight: 115 g / Weight: 5.8 oz / Head thickness: 17 mm / Head: Japanese carbon steel (bronze plated) / Handle: natural oak wood.
Check Stock

Gunpla Rubber Mallet - 8 oz Anti-Slip Stainless Steel Tube Rubber Handle Rubber Head Mallet

  • DOUBLE RUBBER FACES: Gunpla 8 oz rubber head mallet is made with high quality and heavy duty rubber. This quality 8 ounces mallet features double rubber faces designed to perform the toughest tasks in your various projects..
  • REDUCED SHOCK: This double headed rubber hammer are produced with an anti vibration technology that highly reduces the shock and vibration and shock impact or feeling on your hand, making it more convenient for long hours use..
  • STAINLESS STEEL HANDLE: Our long rubber mallet is built with a stainless steel handle to which the double faced head is attached securely..
  • RUBBERIZED ERGONOMIC GRIP: For the rubber hammer mallet to be more comfortable and convenient, Gunpla designed a comfortable rubberized handle to make your tasks and projects less tiring and requiring minimum energy..
  • PRECISION BALANCED: With our mallets, it is easier to hit the target, and they properly spread the force across the tile and/or other delicate surfaces..
Check Stock

haakaa Cleaning Brush Silicone Bottle Brush Double-Ended Soft Silicone Bristles for Breast Pumps, Breast Milk Collectors, Baby Bottles, Teats, Breastmilk Storage Bags, Detachable - Grey, 1pk

  • ♥ Double-Ended Silicone Cleaning Brush(Suva Grey) - haakaa cleaning brush includes two brush heads, on one end is bottle brush head ,on the other end is angled brush head. The double heads design is more flexible and throughly to scrub your breast pumps ,baby bottles, milk storage bags, teats, milk collectors! Perfect cleaning tool for breastfeeding moms..
  • ♥ Multipurpose Bottle Brush - Two different sizes of brush heads: ①Bottle Brush Head - perfectly-sized for scrubbing your baby bottles, breast pumps, and breastmilk storage bags. ②Angled Brush Head with an angled tip - reaches corners of your breast milk collectors, bottle teats and more..
  • ♥ 360° Overall Cleaning - 2 sizes of brush heads reach every corner of the containers you want to clean and satisfy your cleaning needs. Removable brush heads, the connection between the brush heads and handle is tight enough to aviod falling off when using..
  • ♥ Soft and Safe Material - The brush heads are made of food grade silicone, which is BPA,PVC and phthalate-free, soft & flexible. The handle is made of stainless steel, it's sturdy and rust-proof, more easier to reach the corners of your containers and clean totally. Easy-grip non-slip handles can be hung up for convenient storage..
Check Stock

MOCW 6'' 8'' 2pcs Rotary Steel Wire Weed Brush Cutter Trimmer Head with Adapter for Husqvarna, Stihl, Ego, Oregon, and Hitachi Straight Shaft Trimmers for String Trimmers, Rust Removal, Lawn Mower

  • ...ush to the shaft punch of the mower, it can be quickly and easily assembled and disassembled. Can help you meet the needs of mowing and save time in the busy season..
  • 【High Quality Material】The twisted steel wire rotary brush is made from rust and 0.50mm wear-resistant spring steel wire while the steel disc is a double-layered fine-grade, heat-resistant stainless steel. Each twisted wire knot has the same number of steel wires and distributed and positioned evenly on the double-layered steel plate to ensure a proper balance and smooth operation without vibrations or fatigue on the engine..
  • 【Compatibility】This Weeds brush Cutter Trimmer Head Sets fits most gas straight shaft trimmers with 1 inch gear case. Compatible brands include Husqvarna, Stihl, Ego, Oregon, and Hitachi..
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • ... rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's idea....
Check Stock

Council Tool Drake Off Road Tools 3.5 Lbs. Double Bit Classic Michigan Axe with 36" Straight Hickory Handle

  • steel head. Made in USA. Hand sharpened double bits for cutting and splitting, sharpened in the same.
  • Drake Off Road Natural steel finish on head and cutting edges coated in clear lacquer to deter rust..
  • 36″ double-bit American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening..
  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge..
  • Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content..
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ... rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's idea....
Check Stock

3 Pieces Stainless Steel Nail Files with Leather Case, Double Sided Metal Nail Files with Anti-slip Handle, Metal Nail File Buffer Manicure Pedicure Tools for Fingernail Toenail, Fine and Coarse

  • What you receive: comes with 3 pieces stainless steel nail files with leather case, designed with double sides and different heads, including pointed head and round head, easily cater to your needs, the leather case is attached to provide protection when it's not in use, won't scratch your other accessories or hurt your hands.
  • Steady and lasting: these manicure pedicure tools are made of stainless steel material, featuring with good durability and strength, not easy to bread, rust or rot, can last for a long time, light and compact, convenient to carry with when on travel or daily life.
  • Clever and thoughtful: our metal nail files are designed with double sided style and anti-slip handle, one side is rough surface and the other side is fine surface, helps to polish your nail surface and file the nail edges, the handle is nonslip, safer and more thoughtful to operate.
  • Varied in dimensions: our stainless steel nail file buffers contain 3 various sizes, nail files with pointed head are approx. 116 x 10 mm/ 4.6 x 0.39 inches and approx. 92 x 10 mm/ 3.6 x 0.39 inches respectively, the nail file with round head is approx. 121 x 11 mm/ 4.76 x 0.43 inches, diverse dimensions can meet your diverse manicure purposes.
  • Beautify your nails: these double sided nail fil....
Check Stock

TEMO SF-5 5-Pack Set Double Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 2 Inch Long Shank

  • Double cut head. Suitable for deburring and polishing cast iron, cast steel, carbon steel, alloy steel, stainless steel and other materials up to HRC65 hardness..
  • 1/4" (6.35mm) shank and 1/2" (12.7mm) head diameter.
  • Made with tungsten carbide and suitable for deburring and polishing..
  • Packaged in a clear plastic tube | SF-5 Round Nose Tree Head Shape (Pack of 5).
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock