Top Steel Banding Roll Reviews

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, red oak wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging ....
Check Stock

VIVOSUN 20x10x6.6 ft. Large Walk in Green House Tunnel Garden Plant Hot House

  • Roll-up Front Entrance and Window: Zipped roll-up entrances provide an easy access to the green house and a bigger operating space.
  • 12 side windows bring a better air circulation to the green house, even if in hot weather, your lovely plants can breathe fresh air.
  • Heavy-duty Galvanized Steel Frame: Supported by galvanized finish heavy duty steel frame, our tunnel green house is more durable and anti-rust than those whose frames are powder-coated.
  • Reinforced PE Cover: The durable, waterproof and grid cover can protect your plants from rays and give them the optimal light conditions. Your plants will be nourished very well with our VIVOSUN strong walk-in green house.
  • Extra Long Cover Design: Extra-long cover design provides a possibility to be buried in the soil, which reinforces the stability and airtight of our green house, bringing a better condition for the growth of tropical plants.
  • Double Stranded Edge Banding: Our green house is double-stranded edge banding, making the cover more tough and more durable.
  • You can dispense with concerning about the bad weather because of our high-quality green houses.
Check Stock

IDL Packaging - TSS.CW34.1830 3/4\ Heavy Duty Woven Cord Strapping Roll, 1640' Length, 1830 lb. Break Strength, 6\ x 3\ Core

  • RD Steel metal strapping perfect for a variety of applications: securing wide loads, bundling together various metals, roll end binding, pavers and bricks, bailing wire, securing packaged glass, paper, tools, etc., for shipping and handling.
  • 1/2" metal banding is excellent for indoor or outdoor use.
  • Steel strapping is strong and secure for heavy pallet strapping jobs.
  • Steel strapping material with break strength up to 1100 lbs. provides the strongest protection, more than poly strapping can provide.
  • Steel banding has rounded, smooth edges for safe application and to protects products but packaging gloves are still recommended while working with steel strapping.
  • The only difference between standard steel strapping coil and portable steel strapping coil is length and weight.
  • Make sure you use the correct tools with our steel strapping such as: A tensioner, sealer and strapping seals or a 3-in-1 sealless combination tools like MUL-16 or MUL-20 which can perform all operations.
Check Stock

VIVOSUN 13x10x6.6 ft. Walk-in Green House Tunnel Hot House for Outdoor Plant Gardening

  • Roll-up Front Entrance and Window: Zipped roll-up entrances provide an easy access to the green house and a bigger operating space.
  • 8 side windows bring a better air circulation to the green house, even if in hot weather, your lovely plants can breathe fresh air.
  • Heavy-duty Galvanized Steel Frame: Supported by galvanized finish heavy duty steel frame, our VIVOSUN tunnel green house is more durable and anti-rust than those whose frames are powder-coated.
  • Reinforced PE Cover: The durable, waterproof and transparent cover can protect your plants from rays and give them the optimal light conditions.
  • Your plants will be nourished very well with our VIVOSUN strong walk-in green house.
  • Extra-long Cover Design: Extra-long cover design provides a possibility to be buried in the soil, which reinforces the stability and airtight of our green house, bringing a better condition for the growth of tropical plants.
  • Double Stranded Edge Banding: Our green house is double-stranded edge banding, making the cover more tough and more durable.
  • You can dispense with concerning about the bad weather because of our high-quality green houses.
Check Stock

Edge Supply Walnut Preglued 1\ X 25' Roll Wood Veneer Edgebanding - Iron on with Hot Melt Adhesive. Sanded to Perfection. Easy Application. Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple 1/2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is....
Check Stock

Edge Supply Birch 3/4” X 250' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can....
Check Stock

Beck/Arnley 103-2958 Constant Velocity Joint Boot Kit

  • ... can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 1Pcs CV Joint Bo....
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • [Effortlessly Install CV Boot Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band secu....
Check Stock

ROADFAR CV Joint Boot Kit Inner 1999-2005 for Polaris Sportsman 500 700

  • ...le characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With 2Pcs CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 2Pcs CV Joint Boot Clamp Pliers In total 10Pcs in a box, can meet all your different Daily needs..
Check Stock

Binding Tool Kit for Strapping - Poly Strapping Tensioner Cutter & Sealer Manual Banding Tool Windlass Set for 1/2\- 3/4\ Width Polyester Polyproplyn Strap, with 200 Strapping Seals

  • RD Steel metal strapping perfect for a variety of applications: securing wide loads, bundling together various metals, roll end binding, pavers and bricks, bailing wire, securing packaged glass, paper, tools, etc., for shipping and handling.
  • 3/4" metal banding is excellent for indoor or outdoor use.
  • Steel strapping is strong and secure for heavy pallet strapping jobs.
  • Steel strapping material with break strength up to 1700 lbs. provides the strongest protection, more than poly strapping can provide.
  • Steel banding has rounded, smooth edges for safe application and to protects products but packaging gloves are still recommended while working with steel strapping.
  • The only difference between standard steel strapping coil and portable steel strapping coil is length and weight.
  • Make sure you use the correct tools with our steel strapping such as: A tensioner, sealer and strapping seals or a 3-in-1 sealless combination tools like MUL-16 or MUL-20 which can perform all operations.
Check Stock

Edge Supply Walnut 7/8' X 250' Roll Preglued. Walnut Edge Banding, Iron on with Hot Melt Adhesive. Flexible Wood Veneer Walnut Edging Sanded to Perfection. Easy Application, Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, walnut wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this walnut 7/8” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging....
Check Stock

Edge Supply Birch 13/16' X 250' Roll of Plywood Edge Banding, Preglued Real Wood Veneer Edging, Flexible Veneer Edging, Easy Application Iron on Edge Banding for Restoration, Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 7/8” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging i....
Check Stock

Edge Supply Cherry Wood Veneer Sheet Flat Cut, 24” x 96”, 10 mil Paper Back, “A” Grade Veneer Face – Easy Apply with Contact Adhesive Cherry Veneer Sheet – Veneer Sheets for Restoration of Furniture

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3” X 25' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to woo....
Check Stock