Top Standard Diameter Length Reviews

#22 Jobber Drill Carbide Tipped 118° Standard Point, USA Made, Number 22 (.157'), 50369

0.157" diameter carbide tipped jobber length drill 118° standard point.
#22 size. Tool Diameter Tolerance: +0"/-.0007".
Used by machinists and hobbyists for general purpose drilling of most materials..

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

1/4' Jobber Drill Carbide Tipped 118° Standard Point, USA Made (0.25') (Letter E), 50401

0.25" diameter carbide tipped jobber length drill 118° standard point.
Letter Size E. Tool Diameter Tolerance: +0"/-.0007".
Used by machinists and hobbyists for general purpose drilling of most materials..

Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

HoseCoil 3/8 inch Self Coiling Garden, RV, Outdoor Water Hose (15.00, Green)

LIGHTWEIGHT AND GREAT DURABILITY – HoseCoil Self-Coiling Hose is light weight making it easy to handle. It has great retractability. Always snapping back into its small size. This hose is made from (HP) high performance Polyether material..
COMPACT STORAGE – A 15-foot HoseCoil is only 10” long when not in use. (25’ is only 17”).
MULTI USE — Great for Boating, Pool & Spa, RV, Home & Garden. Anywhere compact storage is a benefit. Uses popular ¾ inch garden style fittings are compatible with standard outdoor spigot. Diameter 3/8” ID (Internal diameter) and ½” OD (Outside diameter).
USABLE LENGTH – The usable length is about 70% of the stated length. For example, a 15’ HoseCoil has a usable length of about 10.5’ and 25’ has a usable length of about 17.5’. Strain Relieve is on the supply end to reduce kinking when pulled to its maximum usable length..
SATISFACTION GUARANTEED — 2 Year Warranty. 90 Day No Hassle Return Policy.

Check Stock

Watts Premier 560014 Membrane 110009 24 GPD Membrane Replaced by 560014, 1-Pack

This membrane is not for use with the quick change reverse osmosis systems.
Diameter: 1.8″ Diameter x 10.75 Total Length.

Check Stock

Simhoa 2PACK Spare Windsurf Tendon Joint Replacement Hardware for Windsurfing Mast Foot

RDM / REDUCED DIAMETER MAST / SKINNY - compatible with reduced diameter masts. Not compatible with SDM standard diameter masts..
US BASE CUP - All US base cup universal joints / bases should fit these extensions. Not made for Europin bases..
DOWNHAUL ROPE - downhaul rope included with these mast extensions..
EXTENSION LENGTHS - 12cm (minimum) to 28cm (maximum).
ADJUSTABLE LENGTH - easy to use snap collar adjusts in length by 2cm increments..

Check Stock

CAP Barbell Threaded Standard Bar 1-Inch 250-Pound Capacity 6-Feet

CONSTRUCTION – This standard 6-foot barbell from CAP is made of solid steel with threaded ends and finished with a chrome coating to prevent the bar....
ACCOMMODATES 1-INCH PLATES – Designed with a 1-inch diameter, this standard barbell is designed to accommodate weight plate with a 1-inch center....
FEATURES – This bar features threaded ends with star-lock collars to securely fashion weights onto the bar.
The medium-depth diamond knurling offers....
SPECS – The dimensions are 72-inches length x 2. 64-inches width x 2. 36-inches height.
TRUST – Trust experience. CAP has been a pioneer in the fitness industry for over 30 years with locations worldwide. Chances are, if you have ever....

Check Stock

Rockville Go Party ZR10 Live Street Performance Speaker with Mic with Stand with Tablet Clip

...Boom Tube Diameter: 0.6”. Leg Diameter: 0.75”. Leg Length: 12.6". Top Tube Diameter: 0.6”. Lower Tube Diameter: 0.78”. Steel Gooseneck Length: 11.4”.
Features of RVCLIP5: Rockville Universal Wireless Microphone Clip W/ Flexible Soft Plastic Construction and Copper Threading. This is a high quality clip for standard sized wireless microphones. Flexible and durable soft plastic construction. Clip Works With Mic Diameters of 1.18" – 1.38” inches (30mm - 35mm). High density copper threading 5/8" x 27. 5/8" diameter and 27 threads per inch (Fits standard wireless microphones by Rockville, Shure, Audio Technica, and other popular brands)..

Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

...Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tub....

Check Stock

Adtech 10 Inch Sticks Hot Glue, Full Size, Clear

STRONG BONDING: AdTech 10” Standard Hot Glue Gun Sticks bond to virtually all materials including paper, metal, plastic, wood, fabric, ceramic, florals, glass, foam, lace, ribbon, synthetic fabric, and more!.
FAST BONDING: AdTech 10” Standard size Crystal Clear Hot Glue Sticks quickly bond to virtually any material in as little as 30 seconds. Fit full size hot glue guns. Length: 10 inches, Diameter: 0.44 inches..
HOT GLUE STICKS: AdTech 10” Hot Glue Sticks work in high, low, dual and multi temperature hot glue guns. Use low temperature hot glue guns to bond delicate materials like paper and fabric. Use high temperature hot glue guns to bond porous and heavier materials like glass, wood and metal..
PERFECT FOR DIY or Industrial needs: AdTech Crystal Clear Glue Sticks are perfect to use at home, office, or school. No harsh chemicals and acid-free.
FITS ALL FULL SIZE GLUE GUNS: Fits all full size hot glue guns. Length: 10 inches, Diameter: 0.44 inches. Made In the USA.

Check Stock