Top Stamping Metal Jewelry Reviews

ZonGoods Stamping Blanks Metal Tags,1-1/2 Inch Round with Hole, Aluminum 0.06 Inch (14 Ga.) - 50 Pack

  • Aluminum Stamping Blanks- RPM Stamping blanks are a great quality raw material aluminum blanks. A metal blanks that is durable, thick, lightweight, easy to imprint and soft surface ..
  • Aluminum Stamp with protective film- Our pewter metal stamping blanks has a protective cover in front and back surface that protects the surface during transport..
  • Stamping Tag Size Measurement- RPM aluminum key tag blanks has a diameter of 1-1/2 inch / 25-38 mm.
  • a thickness of 0.06 inch/ 1.55 mm (14Ga).
  • Great Quality Engraving Blanks- This metal stamping kit for jewelry making is made of high-quality aluminum. It is light weight and easy to use with a luster similar to sterling silver..
  • Quantity and Uses- Our jewelry stamping kit is a pack of 50 pieces. RPM round metal key tags are great for making signs, pendants, jewelry diy, charms, dangles, or you could also use them as necklaces, pendants, bracelets and more..
Check Stock

ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer (1 Pound), Great for Stamping Jewelry, Leather & Wood

  • The Ergo-Angle Metal Stamping Hammer was designed specifically for metal stamping. With a smaller, scaled down grip, and multiple holding options, it provides easy handling and precision striking when hand stamping metal jewelry. The 1 pound (1lb) brass hammer head and ergonomic grip aids in striking metal stamps with the right amount of force, every single time. This hammer is great for the beginner and intermediate stamper..
  • The 1 pound brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. The sturdy and grooved grip allows for maximum force and precision strikes. The head is replaceable, because over time, brass hammers may flake when striking, this is by design..
  • Ergonomic grip and 1lb brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. This prevents double impressions and also provides longevity to your stamps and steel punches..
  • Back side of the head of this brass stamping hammer can be used for flattening metal stamping blanks into form..
  • NOTE: being that the brass head is softer than stee....
Check Stock

Crystal Setter Stamping Metal Blanks Metal Stamping Punches Kit Include 3 Jewelry Metal Stamping Tool 1500 Rhinestones 15 Stamping Tags 15 Rectangle Stamping Pendant for DIY Bracelet Necklace

  • Complete jewelry making kit: the package contains 3 pieces of metal stamping punches in 3 different sizes, 1500 pieces of mixed colored crystals in 12 colors, 15 pieces of round metal tags, and 15 pieces of rectangle blank metal signs, packed in a storage box.
  • A considerate combination allows you to fully inspire your imagination and creativity to make more crafts.
  • Simple application: the jewelry metal stamping tool is easy to use, just point the stamping tool at the metal tag, and punch a hole, then fix or insert the flat back crystal inside the hole with adhesive or glue, you will get a stylish pendant.
  • Please note that the surface of the product has a rustproof coating, please wear gloves when using it.
  • Shiny and delicate appearance: with exquisite craftsmanship and delicate appearance, the metal jewelry stamping kit can bring you pleasant visual enjoyment, which can add luster to your objects and make them distinctive from other crafts.
  • The kit is also helpful in making a personalized metal stamp, creating attractive or meaningful patterns, and making your jewelry more beautiful.
  • Extensive usages: these metal stamping blank pendants are suitable for making signs, necklaces, bracelets, pendants, key chains, bag pendants, sweater chain pendants, ornam....
Check Stock

Maisdaner Jewelry Metal Stamping Kit Includes Art Font Letter Punch Number Punch and Metal Stamping Jig Set Stamps Hammer and Steel Bench Block for Metal Jewelry Making(3mm Uppercase+Lowercase Kit)

  • 【 】A complete jewelry metal stamping tools kit! Size: 1/8"/3mm punch set, you are going to receive a set of 35pcs letter punch (Uppercase), a set of 26pcs letter stamps (Lowercase), a set of 9pcs number stamps(0-9, 6 reverse to be 9), a stamping block, a stamping jig, a hammer and a bonus and two “&” symbol stamp. We attach a stamping jig to help ensure the process more stable, clean, and accurate stamping to avoid double impressions and bounces when stamping..
  • 【 】 This jewelry metal stamping tools kit is good to have around if you are a jewelry lover. Lots of words you could combine to make consecutive phrases to meet your different stamping needs. You could make a special gift for your family, friends with stamping some heartwarming words showing your love and gratitude to your loved ones. Looking forward to your many great creative gifts and crafts!.
  • 【 】 Our metal stamp kit can not only can be used on soft metals like dog tag blanks, but also some wood, leather, brass, aluminum, tin and more. This is a stamping on metal starter kit. It is easy to operate even for the beginners. Could be used for ring stamping, bracelet stamping, or ne....
Check Stock

Metal Stamping Kit, 64 Piece Punch Set - Handwritten Style Font Number & Letter Stamps for Metal, Jewelry, Wood, Leather & More

  • PROFESSIONAL QUALITY - This Crutello Metal Stamps Set Includes 26 Uppercase & 26 Lowercase Basic Sans Serif Font Letter Punches, 8 Number Punches (6 and 9 are the same punch). The perfect jewelry stamping kit for the artist in your family!.
  • DESIGNED TO LAST - This Jewelry Letter Stamping Kit features 3mm Steel Punches Designed to Last up to 10,000 Punches. All Metal Letter Stamps are made of High Quality Hrc 58-62 Alloy Steel. Punches are on a 1/8" (3mm) square shanks..
  • FOR USE ON HARD OR SOFT SURFACES - This metal stamping letter set is perfect for beginners creating custom one of a kind jewelry, such as stamped necklaces and bracelets. Perfect metal or leather stamp set for use on hard or soft materials, including Metal, Wood, Plastic, Leather, Aluminum, and So Much More!.
  • CONVENIENT AND DURABLE STORAGE CASE - The Plastic Storage Case Keeps Your Metal Letter Stamping Kit Clean and Organized, so You Won’t Lose Any Letter Stamps Metal Pieces kep safely inside..
  • BASIC SANS SERIF FONT - Add a Personalized Touch to Your Creations! These Metal Stamps Feature a Clear and Clea....
Check Stock

ImpressArt Multi-Function Hammer Kit, DIY Jewelry Making Tool for Metal Stamping, Chasing, Texturing, and Forming Metals

  • Multi-Function Hammer is a versatile tool for metal shaping and texturing. This hammer is good for stamping textures into metal, light metal stamping, chasing, planishing, and forming metals into shape..
  • Texture Stamper – ImpressArt Sprinkle Design Texture Stamp included and can be used to create a fun design. Also works as a texture stamper with any 6mm ImpressArt metal stamp!.
  • Ball Pein Hammer Head – create artisan hammered textures into stamping blanks to create beautiful DIY jewelry..
  • Chasing Hammer Head – easily converts into a chasing hammer to create textures, planish, and shape metals into form.
  • Nylon Hammer Head – safely flattens and re-shapes soft metals, jewelry blanks, and metal stamping blanks..
Check Stock

Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.

  • GENERAL USAGE: The Brass 1 pound metal stamping hammer was designed for metal stamping. It has a smaller and scaled down grip designed for easy handling and precision striking. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. This hammer is great for the beginner and intermediate stamper. Also works great for flattening wire for jewelry making.
  • QUALITY: The brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Sturdy and grooved grip allows for maximum and precise strikes. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow..
  • PRECISION: Because of it’s scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Helps to prevent double impressions and protects the longevity of your stamps. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank..
  • SIZE & DIMENSIONS: Hammer head is about 1 pound in weight and grip is ab....
Check Stock

97 Pcs Jewelry Metal Stamping Kit Metal Stamps Set Include Art Font Letter Punch Set Number Punch Set Hammer and Steel Bench Block for Imprinting Marking on Metal Wood Leather, 3 mm

  • Package Include: this metal stamps set includes 1 piece art font capital letter punch set (include 27 pieces), 1 piece art font lowercase letter punch (include 27 pieces), 1 piece number punch set (include 9 pieces), 1 piece hammer, 1 piece steel bench block, 1 piece stamping jig,30 pieces aluminum practice blanks, and 1 piece black oily double ended marker.
  • Our kits are complete to meet your daily jewelry stamping needs.
  • Reliable and Quality: these 3 mm steel punches are made of quality chrome vanadium steel, and the stamps are designed to withstand up to 10,000 punches.
  • You can as you like to form consecutive phrases and digital stamps.
  • No Rebound Steel Bench Block: steel stamping blocks feature non slip rubber feet that absorb shock, stay in place, and create a solid surface to work on, resulting in stable, clean, and accurate hits.
  • This will make the pattern or lettering we work more delicate.
  • 30 Stamping Blanks: the stamping kit includes 30 aluminum practice blanks.
  • Aluminium is a soft metal suitable for making fine handmade jewelry or fine family keepsakes.
Check Stock

ImpressArt 3mm Metal Stamping Kit with Hammer, Steel Block, Stamp Straight Tape - Newsprint Lowercase

  • This ImpressArt Newsprint Lowercase metal stamping kit includes all the essential tools for hand stamping metal jewelry and crafts..
  • The one pound head Hammer provides optimal weight to leave deep, crisp impressions on your jewelry and crafts..
  • The steel block provides a solid surface and is conveniently sized to take up little workbench space..
  • Stamp Straight Tape allows precise accuracy when stamping letters on metal jewelry. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Now all of your stamps will line up perfectly. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped..
  • The Newsprint metal letter stamps are labeled on the side for easy identification. The stamp set includes 7 bonus stamps: "?" "!" "," "*" "-" "(" and check mark. Each stamp has a 2-1/2 inch long shaft that is clearly labeled on one edge. The actual stamped impressions are 3mm tall, each letter set comes in ImpressArt's sleek storage case. The case features labeled slots for each stamp to keep them organized and for easy access..
Check Stock

OWDEN Professional Steel Bench Block（No Rebound), Metal Bench Block for Jewelry Stamping Tool,(Diameter: 3 Inches, Height: 3/4 Inch) Steel Part: Mirror Polishing with Chrome Plating.

  • OWDEN designed round steel bench block for jewelry making & metal stamping, Size: 3”x3/4”.
  • The steel part is mirror finished and chrome plated.(No rebound design）.
  • The base is made of soft plastic and wraps the bottom of the steel part..
  • The soft bottom helps reduce the rebound force when tapping. It Will make the patterns or letters that we work more perfect..
  • Used for metal stamping blanks/ jewelry tags, and for flattening,chasing, shaping, laying-out, shaping and stamping metal..
Check Stock

Stamping Blank Tags, 1 Inch Round with Hole Aluminum 0.06 Inch Thickness Blanks Tags (100 Pieces)

  • Stamping blank tags: the diameter of this stamp tag is 1 inch/ 25 mm, the hole diameter is 0.075 inch/ 1.9 mm, thickness is 0.06 inch/ 1.5 mm, convenient to adopt the tap method, blank design is great for stamping to leave imprint.
  • Protective film: the aluminum stamping blank has a protective cover in the front and back surface, easy to be peeled off, and will leave a very nice, clean and scratch-free surface for stamping into.
  • Sturdy quality: the metal stamping blanks are made of aluminum, with a good polish have a luster similar to sterling silver, lightweight and easy to use, take a stamp clearly and easily, will not be easily bent.
  • You will receive: aluminum stamping blank tags are in 50, 100, 150 pieces for you to choose, which will meet your various needs.
  • Note: metal products, pointed edges, please use with caution.
  • Wide applications: round metal key tags are great for making sign, pendant, jewelry diy, charms, dangles, or you could also use them as necklaces, pendants, bracelets and more.
Check Stock

Metal Stamping Kit, Complete Jewelry Stamping Tools with 74pcs 3mm Artistic Font Uppercase & Lowercase Letter Punches and Number Punch Set, Metal Stamping Jig, Stamps Hammer, Steel Bench Block

  • 【Professional Metal Stamping Set】- You will immediately enjoy the most complete DIY metal stamp set! It includes a metal stamping jig, a stamp hammer, a steel pedestal and 74pcs 1/8"/3mm punch set, includes "A-Z" letters, "a-z" letters, "0-9" numbers, a "❤" and 2pcs "&" symbol punches..
  • 【DIY Art Stamp Punch】-The same artistic font punch set can freely form continuous phrases and digital imprints to create unique and fashionable hand-stamped jewelry and craft components, such as rings, bracelets, necklaces, earrings, keychains , Pendants and pendants..
  • 【Metal Stamping Jig】- This easy-to-grip stamp holder makes metal stamping easy for beginners and prevents your fingers from being injured. It is designed to keep the stamp flush on the stamped blank and metal surface, thereby promoting a clear and uniform complete impression..
  • 【Metal Stamp Hammer】- The double-sided hammer head is forged from high-quality high-carbon steel, which is not easy to break, has high hardness, and is durable. The ergonomic handle helps jewelry making more comfortable, and provides proper strength, and every strike will be more accurate..
  • 【Round Steel Bench Block】- Its size is 3”x3/4”, the steel part is mirror-plated with chrome (no rebound design), the bas....
Check Stock

MULSAME 37 Pcs Metal Stamping Kit with 1/8 Number & Capital Letter Metal Stamps Square Shank Fit for Jewelry Stamping.

  • MULSAME professional metal stamp kit includes uppercase 26pcs. Letter(A-Z), 9pcs. number(0-9) reverse “6” can be used as “9”,1pc. symbols(&)....
  • All metal stamps are made of high quality alloy steel to guarantee the strength and hardness. And Anti-rust oil would protect the metal letter stamps....
  • MULSAME stamping kit could be used on various materials. They are not only designed as jewelry stamping kit but also designed for Metal, Brass, Wood,....
  • With MULSAME metal stamping kit, accurate dimensions and clear strokes could be designed on rings, wristband, belt etc...
  • MULSAME letter punch set is organized in a plastic case for easy storage..
Check Stock