Red Head SLDT-3830 Stainless Steel Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor 50 per Box
- Anchor Bodies are Made from Stainless Steel.
- Finished Hex Washer Head, with Anti-Rotation Serrations.
- Anchor is Stamped with a Length Identification Code.
Top Stamped Washer Reviews
Red Head SLDT-3840 Stainless Steel Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box
- Anchor Bodies are Made from Stainless Steel.
- Finished Hex Washer Head, with Anti-Rotation Serrations.
- Anchor is Stamped with a Length Identification Code.
The Hillman Group The Hillman Group 1145 Flat Speed Nut 10-24 in. 60-Pack
- Speed nuts act as both a lock washer and nut.
- Speed nuts are made for spaces with minimal clearance.
- Speed nuts are designed to for quick application and removal, making them reusable.
- These flat-type speed nuts are engineered to fit #6-32 coarse thread machine screws.
The Hillman Group The Hillman Group 1147 Type \U\ Speed Nut 8-32 In. 20-Pack,Gray
- Speed nuts act as both a lock washer and nut.
- Speed nuts are made for spaces with minimal clearance.
- Speed nuts are designed to for quick application and removal, making them reusable.
- These U-type speed nuts are engineered to fit #8-32 coarse thread machine screws.
Jean Dubost Laguiole 6 Steak Knives Set French Steak Knife Set of 6, Made in France With a Microfiber Cleaning Towel (Bundle 6 Knives, wood Box and Microdermabrasion Towel)) (Black)
- Each knife in this set has a gauge of 2.5mm, is put through 25 different production stages before it is stamped, polished, and packaged. The knives are rust resistant and are dishwasher safe..
- ABS handles. Stainless Steel Sharpened Blades. Stainless steel caps.
- Care Instructions: We recommend washing your cutlery gently by hand under running hot water and to wipe it off immediately after. However, most of products, apart from those with natural wood handles, are dish-washer safe..
- A bee that is found engraved on all Laguiole products, was originally part of Napoleon Bonaparte's imperial seal. The blade, made of high-grade stainless steel, is stamped, then ground and then polished in over 25 different manual production stages..
Dewalt Engineered by Powers 1/2 x 3 Screw-Bolt+ Concrete Screw Anchor Zinc PFM1411380 50/BX
- Low installation torque in concrete and masonry.
- Ratchet teeth on underside of hex washer head lock against the fixture.
- Diameter, length and identifying marking stamped on head of each anchor.
- Can be installed closer to a free edge than traditional expansion anchors.
Simpson Strong Tie SDS25412 1/4 x 4-1/2 Hex Head Wood Screw 800 per Package
- 1/4" x 4-1/2" SDS Screw, 2-3/4" Thread Length.
- 4CUT tip reduces install torque & makes driving easier with no predrilling & minimal wood splitting.
- Double-barrier coating finish provides corrosion resistance superior to hot-dip galvanization.
- 3/8" hex washer head stamped w/No-Equal sign & fastener length for easy identification after install.
3/8 x 4 DeWALT Engineered by Powers Screw-Bolt High Performance Screw Anchor Zinc-Plated 50
- Low installation torque in concrete and masonry.
- Ratchet teeth on underside of hex washer head lock against the fixture.
- Diameter, length and identifying marking stamped on head of each anchor.
- Can be installed closer to a free edge than traditional expansion anchors.
3/8 x 5 DeWALT Engineered by Powers Screw-Bolt High Performance Screw Anchor Zinc-Plated 50
- Low installation torque in concrete and masonry.
- Ratchet teeth on underside of hex washer head lock against the fixture.
- Diameter, length and identifying marking stamped on head of each anchor.
- Can be installed closer to a free edge than traditional expansion anchors.
Erie Tools 14\ Stainless Steel Hot and Cold Pressure Washer Surface Cleaner with Wheels No Handle 4000 PSI 4 GPM
- Erie Tools 14-inch stainless steel flat-surface cleaner pressure washer attachment is designed to clean large, flat surfaces.
- Maximum water temperature of 210 Degrees F, making it ideal for hot- or cold-water applications.
- Versatile cleaner with wheels will tackle most surfaces with ease including aggregate, stamped concrete, and other textured flat surfaces.
- Stainless steel housing is built to withstand the toughest abuse for a long operating life.
- Cleaner has a 1/4-inch Quick Connect inlet for use with any standard wand and trigger gun.
Erie Tools 12\ Stainless Steel Surface Cleaner with Wheels for Hot Cold Water Pressure Washer 4000 PSI 8 GPM No Wand
- Erie Tools 12-inch stainless steel flat-surface cleaner pressure washer attachment is designed to clean large, flat surfaces..
- Maximum water temperature of 212 Degrees F, making it ideal for hot or cold-water applications..
- Versatile cleaner with wheels will tackle most surfaces with ease including aggregate, stamped concrete, and other textured flat surfaces..
- Stainless steel housing is built to withstand the toughest abuse for a long operating life..
- Cleaner has a 1/4-inch Quick Connect outlet for use with any standard wand and trigger gun..
AS Headlight Assembly Compatible with 2007-2013 Toyota Tundra /2008-2017 Toyota Sequoia Chrome Housing Driver and Passenger Side
- COMPATIBILITY: Headlight assembly compatible with 2007-2013 Toyota Tundra (fits headlight models without level adjusters) / 2008-2017 Toyota Sequoia (fits 12-14 headlight models without headlight washer).
- BULB MODEL: low beam: H11, high beam: 9005, turn signal: 4157A. Bulbs not included..
- BRIGHTER & WIDER LIGHTING: This upgraded headlight assembly allows for better visibility in any dim conditions, making your driving safer..
- WEATHER-SEALED:The fully sealed structure improves the waterproof level and effectively prevents moisture from entering the interior of the headlight..
- Pass DOT and SAE certification:High quality driver and passenger side halogen type headlights DOT and SAE stamped and meet all safety requirements..
WORX WA0222 40V Nitro Driveshare Pole Saw Attachment
- Specs: Description: Hybrid Trimmer Head, Arbor Sizes: M8 x 1.25 LH x 22 mm stamped #1 screw, M10 x 1.25 LH x 21 mm stamped #2 screw, M7 x 1.00 LH x 22 mm stamped #3 screw, M8 x 1.25 RH x 22 mm stamped #4 screw, 5/16"-18 UNC RH x 19 mm stamped #5 screw, M8 x 1.25 RH stamped A nut, M10 x 1.25 LH stamped B nut, M10 x 1.00 LH stamped C nut, 3/8"-24 UNF-2B RH stamped D nut, 5/16"-24 UNF-2B RH stamped E nut, M10 x 1.50 LH stamped F nut, M8 x 1.25 RH stamped J nut, 3/8"-24 UNF-2B LH stamped K nut.
- Compatible With/Replacement For: most gas, straight and curved shaft trimmers.
- Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
- Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..