Top Stainless Trailer Wire Clips Reviews

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base

  • Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light.
  • This Truck Trailer ID Light bar is great for trailer applications more than 80" wide.
  • This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1").
  • Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe.
  • EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end.
  • Three replaceable 3-LED trailer light bar is universal for 12V Vehicles: Trucks, trailers, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome, pickups etc..
  • You can mount this 3 led light bar on the top of your truck trailer or between the tailgate taillights to draw extra visibility to your wide trailer for added on-road safety.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

  • 25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

Partsam Pair 3.9" Side Marker & Clearance Light Red Waterproof Black Base Mount 3LED, Sealed Thin Line LED Trailer Marker Clearance or ID Lights w/Miro-Reflectors

  • Package includes 2pcs Red 3LED 12V Truck Trailer Clearance Lamp Side Marker Light.
  • including stainless screws for installation in package.
  • NOTE: The covers are removable. Please snap off the lens and install the base with screws, then snap it on, very secure.
  • Waterproof Lens,sealed Light Led marker trailer.
  • dimensions without base: 98 x 31 x 26(mm).
  • Universal for Pickups,Truck Trailers,SUV van Caravan and Boat Lorry Bus.
  • Replace rear clearance lights on RV or replace boat trailer clearance lights.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • HARDWIRED WITH 2 WIRES(NO SWITCH): red wire is the lead and black the ground.
  • draw exactly 40 milliamps of current at full brightness.
  • Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc. Easy installation: waterproof, well sealed.
Check Stock

Cenipar Trailer Hitch Pin & Clip with Grooved Head, 5/8-Inch Diameter, Fits 2 or 2-1/2-Inch Receiver

  • ✈EASY INSTALLATION: You can easily insert the hook clip, just plug the ball seat or other hook accessories into the receiver. Line up the pin holes on the side of the receiver tube, insert the hitch pin and install the clip, the pin can be securely attached to the trailer tether and mounted to the ball. It is easier to use and more ergonomic to install when needed..
  • ✈PREMIUM QUALITY: Trailer hitch pins and clips are made of solid steel, protected with a durable galvanized finish for excellent rust and corrosion resistance, reliable strength construction, that can resist rain , dust, and other corrosion threats. Provides solid security..
  • ✈COMPATIBLE: The 105 degree bend of the trailer hitch pin provides a useful handle for using 5/8" pin diameter trailer hitch pins and clips with grooved heads. 5/8" diameter trailer hitch pins with clips are made of solid steel for proven strength and safety and are recommended for - 2" ， 2-1/2" and 1-1/4" trailer receivers..
  • ✈DURABLE: 5/8" pin diameter trailer hitch pin, with clips to fit 2" receivers, the tail hook lock has a durable powder coating finish to avoid various phenomena caused by rust, such as rust that is difficult to open with a key..
  • ✈WHY CHOOSE US: Trailer hitch pins and clips are made of hig....
Check Stock

Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved

  • A MUST FOR 80" OR WIDER TRAILERS - Trailers measuring 80" or wider require identification lights for additional visibility.
  • mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety..
  • DOT-CERTIFIED REFLECTIVE LENS - Unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations..
  • IP67 SUBMERSIBLE RATED - Waterproof and entirely-submersible for unparalleled all-weather usability.
  • mounting bracket features water drainage notch for added protection..
  • SOLID CONSTRUCTION - Black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Stainless hardware included..
  • STRAIGHT-FORWARD INSTALLATION- Mounting bracket features notches on its short sides for easy wire routing.
  • positive input wire and ground wire are attached.
Check Stock

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

Miady 25ft Trailer Wiring Harness with 4 Flat Connector, 18 AWG Color Coded Wires Trailer Light Wiring Harness Extension with 4ft White Ground Wire

  • Long Enough: The Miady 25' Trailer Wiring Harness gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • Wishbone Style Wiring Setup Designed: Constructed with Wishbone Style Wiring Setup and 4 way connectors design makes the running light circuit and splits it at the trailer connector, so you do not have to run a jumper wire from one taillight to the other. Simplify the installation process to save more time..
  • 4FT LENGHT GROUND WIRE: Equipped with 4 Way flat plug connector with trailer ends and a white ground wire, designed to split at the trailer tongue and run down each side of the trailer. The trailer side ground wire is 4ft, it is enough to use for your trailer, which is completely sealed for a long corrosion-resistant installation..
  • SIMPLIFIED CONNECTION: Come with 18 AWG COLOR CODED WIRES clearly identify each wire's function, makes it much easier for wires connection as well as adding more convenience and installation safe and straight-forward..
  • Wide Application: Ideal for marine boat trailer, horse trailer, motorcycle trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug) . - We provide 24*7 friendly c....
Check Stock

Hao Pro Hitch Pins Clips Cotter Pins Spring Clip Hair Pins 9 Pack for Trailer Hitch Pins Strong Spring Tension Thicker Sturdy for Tow Bar Tractors Mower Carts Truck 3.5mm Wire Diameter 75mm Length

  • Perfect for TRAILER hitch pins: Essential for trailer ball pin.Use on lawn garden tractors for the mower decks.Perfect for lawn mower tire or riding mower and carts.You can upgrade all your tractor and truck hitches..
  • Strong spring tension:Good for serious applications where the pin will not be removed frequently as the spring tension is very strong,because you want a firm fit when the clip is in place.Furthermore, once these are in place they last.Good stiff pins.Replacing hitch pins on most equipment that came with weaker pins..
  • Thicker than the original pin that came with the hand truck/dolly.Sturdy and handy,even when you suspend a heavy RV by these, they won't shear or break, no matter how much they are pulled, yanked, twisted, or jerked. Great clips,heavy weight enough..
  • Great replacement solution for lost clips on your handtruck.For tow bar and for other equipment around our farm.For when you loose the trailer hitch pin. Perfect for a lot of other uses..
Check Stock

Billion wealth 18AWG 20 Feet 4 Wire 4-Flat Trailer Wiring Harness Extension Kit

  • This 4 pin trailer connector is designed to match industry standard 4way flat sockets, provides a male plug for your trailer and can be used to replace a worn out, broken wire on a wide variety of trailers.
  • Material：Made of Pure copper, Wire diameter 18AWG , The safe temperature is below 105 degrees Celsius and the safe voltage is below 300V. It is wrapped with insulating rubber that will never rust or corrode..
  • If you need trailer lines of other sizes and specifications, you can also click on the other links.
  • Safe: The hard PVC shell can protect the wire, anti-corrosion, anti-oxidation, and the rubber-coated design at the wire joint can be more effectively waterproof.
  • Universal - Compatible With TRAILERS UNDER & OVER 80" WIDE. Suitable for all types of trailers including marine boat trailer, horse trailer, motorcycle trailer, ATV trailer, and other cargo utility trailer hitches.
Check Stock

WOFTD 4-Way Trailer Wiring Harness with 5 ft Wires 4-Pin Trailer Wiring Jacketed Cable 4 Flat Trailer Wire Extension Connector - 5 ft

  • WOFTD 4-Way Trailer Wiring Harness with 5 ft Wires 4-Pin Trailer Wiring Jacketed Cable 4 flat trailer wire Extension Connector - 5 ft.
  • The WOFTD 4-way trailer Wiring Harness, the wire is made of 18AWG brass material, The safe temperature is below 105 degrees Celsius and the safe voltage is below 300V. It is wrapped with insulating rubber that will never rust or corrode..
  • This 4-pin trailer wiring plug comes ready to splice into your existing trailer wiring It can be used to connect the taillights, brake lights and turn signals. 4 Way Flat Trailer Wire Harness Connector Socket for Trailer Truck Hitch Wiring..
  • The 5-ft wire lead provides plenty of extra length for a flexible installation.(The Trailer Wiring Harness perfect adapt WOFTD Trailer Plug Adapter).
  • Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
Check Stock

Red Trailer Light Bar 3 Light 9 LED Clearance ID Bar Marker Tail Light for Trailer Truck Boat [DOT Certified, IP67]

  • 【Durability】 Red 9-LED Trailer Light Bar features stainless steel black base light, sealed waterproof pc lens, corrosion resistant and well protect leds from moisture and rain drops..
  • 【Application】 This led clearance light bar is universal for 12V vehicles: trucks, pickups, motorhome, travel trailer, boat trailer, horse trailer, camper trailer, RV, SUV etc..
  • 【Brightness】 Output Super Bright red light, more eye-catching without glares, easy warn the upcoming car to reduce accidental risks..
  • 【Easy To Install】 Size: 14.3" x 1.2" x 1.2".
  • Hole distance: 8.5". The id bar light contains one red wire hook up for power (+) and is grounded (-) via 6 optional screws on the back. Trailers measuring 80" or wider require identification lights for additional visibility.
  • mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety..
  • 【Waterproof】 IP67 Waterproof trailer light bar always be ready for different kinds of weather attack, withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather..
Check Stock