Top Stainless Steel Thread Fittings Reviews

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400303

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Full Thread Length (LgV) = 27mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400203

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 20mm, Full Thread Length (LgV) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

mxuteuk 5pcs Push to Connect Tube Fittings Copper Pneumatic fittings Male Straight push in air hose fittings 3/8 Tube OD x 3/8 NPT Thread

  • 【Type】Quality Pneumatic Male Straight.
  • 【Material】mxuteuk Pneumatic fittings are Made of Quality plastic and stainless steel for durable use.
  • Thread Coated with PTFE, offering good seal property，the joint can 360 degree rotation, Simple and dexterous；.
  • 【Working Temperature】0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC.
  • 【Package Content】5pcs x Straight Push-in Connect Fittings.
Check Stock

ZOMCHAIN Marine VHF Antenna Mounts, Ratchet Mount, 316 Stainless Steel Adjustable Base Mount for Boat

  • ✔ Size: Base measures 3 9/16" x 2 1/2" , 0.87" - 10 thread male, 3/8" hole for cable pass through, Hole diameter 5/16".
  • ✔ 316 Stainless steel: Marine grade 316 stainless steel, rust-proof, Excellent seawater corrosion-resistant and durable. Highly polished to a beautiful mirror-like finish.
  • ✔ Packaging: There are two kinds of screw fittings for your choice, one is the bolt, the other is the screw (All accessories are made of 316 stainless steel).
  • ✔ Anti-Corrosion Materials: Marine Antenna Mount made of precision cast 316 marine grade stainless steel.
  • ✔ Exquisite design：The antenna pedestal has two adjustable ratchets. The upper ratchet has an adjustable angle of 270 degrees and the lower ratchet has an adjustable angle of 180 degrees.
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

20 Packs Stainless Steel Filter Garden Hose Washer, Self Locking Tabs Keep Washer Firmly Set Inside Fittings with 40 Mesh for 3/4 Inches Garden Hose and Water Faucet

  • Package contents: the package includes 20 packs of 40 meshes stainless steel filter garden hose washers with 4 small outer tabs for 0.75 inches garden hose, adequate quantity for you to use for a long term.
  • Design and function: these rubber faucet washers are designed with 40 mesh stainless steel filter and 4 small outer tabs.
  • To filter sand and gravel to reduce the possibility of nozzle clogging and to fix them in place firmly and properly, preventing washers from falling out of the hose fittings.
  • Size: outside diameter: 25 mm, inside diameter: 16 mm, thickness: 3 mm, stainless steel: 40 mesh.
  • The hose washers fit most standard 0.75 inches garden hose fittings with hose thread connections.
  • Excellent material: the washers are made of stainless steel and quality rubber, which is durable and sturdy, and convenient for you to use, giving you a good experience of using reliable rubber washers.
  • Use: the hose gaskets can repair a leaky water tap, disconnect water controller, and then twist the faucet and replace the broken one so that you can have a good replacement part for garden hoses with water tap.
Check Stock

CWM Pot Filler Faucet Stainless Steel Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

  • Constructed by 1.5mm thick SUS 304 stainless steel tubes.
  • Equipped with solid brass ceramic cartridge.
  • Equipped with CWM Aerator provides a steady pressure and straight consistent 3.5 GPM water flow.
  • 100% factory high pressure and low pressure tested.
  • pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added.
  • dual swing joints allows the pot filler to easily fold away when not in use.
  • NPT 1/2" conical connection thread (without brass fittings), can prevent water leakage without using water tape.
  • NPSM 1/2" connection thread, need to use water tape.
  • Fit for US Standard, with a installation flange for stability ..
Check Stock

Fitvell Stainless Steel Bulkhead Fitting 1/4 NPT Female Bulked Coupler Thru-bulk Tank Fitting Connector pack of 2

  • Size: 1/4" npt full female to 1/2" BSP male.
  • Thread outside dimension: 0.825 inch(20.96mm).
  • NPT thread has a taper and won’t screw thread to the end..
  • Material: made of 304 stainless steel for high strength and resistance to corrosion. Long service life..
  • Temperature & Pressure: -868 to 1472 degrees F/-500 to 800 degrees C for temperature range.
  • Application: this female coupler is applied for connecting 1/4” NPT fittings through a bulkhead..
  • Attn: Please make sure you’ve choose the right size before order..
Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

  • Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
  • Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
  • Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
  • Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
  • Bulkhead OD 25mm, suitable for about 25mm ID hole..
Check Stock

EZ-FLO 48336 Braided Stainless Steel Dishwasher Installation Kit, 6 foot

  • LENGTH: The water connector measures 6 Ft long.
  • MATERIAL: This long-lasting water connector is made up of high-quality, heavy-duty stainless steel which resists corrosion and provides extreme durability.
  • UNIVERSAL KIT: This installation kit is universal and fits major dishwasher brands with ease.
  • CONTENT: The kit includes both elbow fittings- hose thread and male pipe thread, one hose clamp for drain hose, 3 wire nuts and one 1/2″, and a 6 Foot long braided water connector.
  • EASY INSTALLATION: The included hardware makes the installation process easier and efficient.
Check Stock

LeLuv Vacuum Fitting Set: 1/4 inch Barbed Male and 1/8 inch -27 NPT Threaded Female Quick-Release - 2 Sets in White

  • Bundle of 2 Items: 1/4" barbed male and 1/8" threaded female Fittings.
  • Quick-release vacuum fitting SET - no more leaks!.
  • Made with medical grade nylon, stainless steel and silicone.
  • Female Fitting thread size is 1/8 Inch 27 NPT.
  • Specially design to fit LeLuv/Eyro brand cylinders and fittings with 100% guarantee. We do not guarantee that the item(s) will fit any other brands..
Check Stock