Top Stainless Steel Swage Jaw Reviews

3/16\ Cable x 1/4\ Thread, Stainless Cable Railing Xtra Long Threaded Stud

This product is a part of the HAAS Stainless Legacy Cable Rail System Dome Swage - 3/16 inch size, Stainless Steel, Type 316..
Electro Polished! Using electricity in a tank of chemicals, the outer layer of the surface of the part is peeled away to expose the chromium molecules and that results in a shiny, corrosion resistant finish..

Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....

Check Stock

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....

Check Stock

Loos Cableware MS20667-2 Stainless Steel Fork End for 1/16\ Diameter Wire Rope

Stainless Steel Marine Eye Swage Fitting.
Type 316 Stainless for superior corrosion resistance even in salt water environments.
Convenient package of one fitting for 5/32" wire rope.

Check Stock

Hilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory

SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.

Check Stock

Muzata Cable Railing Post Intermediate Post Stabilizer 42\x1\x2\ Stainless Steel Brushed Finishing Pre-Drilled Post Top Mount for Wood Concrete Level Deck PS11 LH4L, PT1 PT2 PT6

This flexible wire making it easy to work with, and has a low co-efficient of stretch. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings..
Marine Grade T316 Stainless Steel, 1/8" diameter, 200 Feet length, 1780 lb breaking strength. 7x7 construction (7 groups of 7 strands braided together to form the cable).
Wear resistance, suitable for traction, pulling, strapping. Perfect for cable railing project, 7x7 cable is Sturdy, Long Lasting, and high tensile strength..
This type of wire rope is best used with wire rope Tec's 1/8" hand-crimp cable railing fittings. Require assorted railing Kit which include Jaw Swage Fork, turnbuckle, crimping Loop Sleeve, thimble..
If you don't know how to install, please feel free to contact us. If you do not like our products, we accept 30 days return, replacement and refund(Full or Partial).

Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

...imp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless..

Check Stock

Loos Cableware EY1-2X Stainless Steel Marine Eye End for 1/16\ Diameter Wire Rope

Stainless Steel Marine Eye Swage Fitting.
Type 316 Stainless for superior corrosion resistance even in salt water environments.
Convenient package of one fitting for 1/16" wire rope.

Check Stock

LIVTE 4 Pcs 7/8 Inch Bimini Top Jaw Slide (22mm), 316 Stainless Steel Marine Boat Hardware Fitting Awning Accessories

【4 Pack & Size】4 pcs stainless steel jaw slide.
7/8" inside diameter, fits 7/8" round tubing.
【316 Stainless Steel Construction】Made of polished finish 316 stainless steel with rust resistance, heavy duty and weather-resistant..
【Fine Polished Finish】Highly polished finish surface with corrosion resistance, smooth with no burr to prevent hurting your hands, easy for installation..
【Applications】7/8 inch stainless steel Bimini top jaw slide is great for your boat or kayak canoe rigging, nice marine boat hardware fitting..
【100% Money Back】For these Bimini top jaw slide, you will get a 100% customer support. Any quality problems, a replacement or a full refund will be assured..

Check Stock

ArkHardware 3/8\ Jaw & Jaw Turnbuckle Open Body Precision Cast Cable Railing Rigging Stainless Steel Type 316 Marine Grade (3/8\ - 1 Piece)

ArkHardware 3/8" Jaw & Jaw Turnbuckle open body PRECISION CAST Stainless Steel T 316 Marine Grade..
Turnbuckle Bodies are UNC Threads.WORKING LOAD LIMIT= 1300 LBS. 1Pcs= WT-1.25 LBS. END FITTING CAN BE SWITCH AS YOU NEE.
PRECISION CAST-DURABLE TYPE 316 STAINLESS STEEL.

Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..

Check Stock

Crosby 1045096 Shoulder Nut Eye Bolts, Forged Carbon, Galvanized, 3/8\ x 2-1/2\

Convenient package of one swage fitting for 3/16" cable.
Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
Follow manufacturer's swaging instructions.

Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....

Check Stock