Top Stainless Steel Shim Gauge Reviews

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.

Check Stock

Stainless Steel Slotted Shim Kit, Size A, 2\ x 2\ Starter Kit (130 shims)

Stainless Steel Pre-Cut Slotted Shim MADE IN THE USA, Unique Tab Design for Easy Handling.
Thickness Marking in both inch and metric (mm) units. Accu-size Marking - No Measurement Required.
MORE FOR YOUR MONEY -- OUR STARTER KIT CONTAINS MORE SHIMS THAN OTHER STARTER KITS FOR SALE ON AMAZON..
Kinetic Improvement also offers refill packs of each individual size shim.

Check Stock

Stainless Steel Slotted Shim Kit, Size C, 4\ x 4\ Starter Kit (130 shims)

Stainless Steel Pre-Cut Slotted Shim MADE IN THE USA, Unique Tab Design for Easy Handling.
Thickness Marking in both inch and metric (mm) units. Accu-size Marking - No Measurement Required.
MORE FOR YOUR MONEY -- OUR STARTER KIT CONTAINS MORE SHIMS THAN OTHER STARTER KITS FOR SALE ON AMAZON..
Kinetic Improvement also offers refill packs of each individual size shim.

Check Stock

Small Parts-81225 Stainless Steel Slotted Shim, Unpolished (Mill) Finish, Metric, 0.250 mm Thickness, 50 mm Width, 50 mm Length (Pack of 10)

Stainless steel slotted shim provides good resistance to corrosion and high temperatures.
Slotted shim fits around bolts and screws that are already installed and has a top tab for placement.

Check Stock

XiKe Carrier installation Bearings and Shim Kit CKD 30, Compatible TJ Wrangler, Grand Cherokee, Liberty KJ, Chrysler Front, JK Non-Rubicon and Dana 30 Differential.

Includes carrier bearings and carrier shim kit..
Tapered roller bearings have high speed and durable..
Tested compatibility 1 year warranty no need to worry..
Professional bearings manufacturing began in 1945..

Check Stock

Amarine Made Standard Transom Mounting Bracket, Quick Release Mount for Sport Diver Ladder

Transom Mounting Extension Shim Only Fit Diver Ladder.
Protects your boat’s ladder Quick-release mounting hardware.
Mount your Sport/Dive ladder in multiple locations with this extra quick release mount.
Quick-release stainless steel mounting hardware included with built-in angle adjustment and breakaway feature..

Check Stock

Master Lock 1500D 1-7/8in. Wide Combination Dial Padlock

Nickel-plated case-hardened steel swivel shackle.
1-7/8in (48mm) Wide durable metal body with stainless steel cover.
Hardened steel shackle for extra cut resistance.
3-digit combination security for keyless convenience.
The 3-digit combination offers keyless convenience. The locking mechanism features anti-shim technology, offering maximum security.

Check Stock

Yaegarden Standard Transom Mounting Bracket, Quick Release Mount for Sport Diver Ladder

Transom mounting extension shim only fit diver ladder.
Protects your boat’s ladder Quick-release.
Mount your Sport/Dive ladder in multiple locations with this extra quick release mount.
Quick-release stainless steel mounting hardware included with built-in angle adjustment and breakaway feature.
Warranty : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund..

Check Stock

Bosch 2329839 Table Saw Blade, Blue

Stainless steel version. The item Comes with a carrying case..
Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material..
Splinter-resistant cuts in veneer plywood, melamine and hard or soft woods..
Four-tooth chippers that keep the cut flat and virtually free from tear out.
3/32-Inch chipper made especially for undersize plywood with steel shim set for cuts between 1/4-Inch and 29/32-Inch..

Check Stock

50pcs Adabele 304 Grade Surgical Stainless Steel Hypoallergenic Earring Hooks Leverback Earwire 15mm Long for Earrings Making SJF193

(50pcs = 25 pairs) Material: 304 grade stainless steel which is safe, surgical grade, hypoallergenic, and tarnish resistant metal.
✦ 304 stainless steel is widely used in medical equipment, household products, and food industry.
It is an excellent material for use in jewelry due to its low risk for allergic reaction.
Stainless steel may contain small amounts of nickel, but stainless steel with the same percentage of nickel is used in food handling and processing industry.
It's generally considered hypoallergenic for most people.
Size: ~ 15mm long x 10mm width (or ~ 0.6" x 0.4"), Wire gauge (thickness): ~0.7mm or 21 gauge or 0.028 inch - standard ear wire gauge (thickness), please make sure this wire gauge meets your need before placing an order. Thank you.
✦ These Adabele’s 304 Stainless Steel Products Come with a 304 Stainless Steel Quality Guarantee Certificate Issued by Adabele LLC, California, U.S. A. ✦ These items also come with a 30 days limited warranty against material to ensure your complete satisfaction ✦ These Items are packaged in Adabele Trademarked Bag.

Check Stock

DGOL Stainless Steel Mini Portable Metal Sheet Thickness Gauge Material Wire Thickness Gage

DGOL METAL SHEET THICKNESS GAUGE IS A GREAT TOOL TO GAUGE NON-FERROUS WIRE AND METAL SUCH AS COPPER,BRASS,ALSO GAGING UNCOATED SHEET,PLATE IRON AND STEEL.
MATERIAL: STAINLESS STEEL WITH GOOD FINISH,CLEAR AND EASY TO READ LETTERS AND NUMBERS.
WHY YOU SHOULD CHOOSE OUR GAUGE.1:OUR GAUGE IS MADE OF STAINLESS STEEL,NOT IRON OR NORMAL STEEL,MOST PRODUCT IN MARKET ARE MADE OF IRON OR STEEL.. 2: THE NUMBERS AND LETTERS ARE VERY CLEAR AND SHINNING.
SMALL GAUGE, NOT AS BIG AS YOU THINK, LENGTH IS 2.88"(7.3 CM), WIDTH IS 1"(2.54 CM).
THE THICKNESS GAUGE PROVIDE QUICK AND ACCURATE MEASURING,A GREAT TOOL FOR WELDER,MINI GAUGE,PORTABLE TO CARRY AND EASY TO USE.

Check Stock

Wokape 6Pcs 5 Sizes Stainless Steel Radius Gauge with Feeler Gauge Kit, 5 Sizes Metric and Imperial R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 Arc Fillet Concave Convex Gap Measuring Tool

【What You Get】 ------ In this kit, You will get 5 different Sizes Stainless Steel Radius Gauge, Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 , Each sizes has 1Pcs. These Radius Gauge can meet all your various need. With Stainless Steel Feeler Gauge Dual Marked Metric (0.04-0.88 mm, 32 Blades)..
【High Quality】 ------- This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust. There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that..
【Stainless Steel Radius Gauge Excellent Design】------- The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
【 Stainless Steel Feeler Gauge Sizes 】------- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88. Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..

Check Stock

Master Lock 160EURD 60mm Brass Padlock

Indoor padlock is best used as a school locker lock and gym lock, providing protection and security from theft.
Preset three-digit combination lock for keyless convenience.
Combo lock is constructed with a metal body, stainless-steel cover, hardened steel shackle, and anti-shim locking mechanism for strength and security.
9/32 in. (7 mm) diameter shackle with 3/4 in. (19 mm) length, 13/16 in. (21 mm) width.

Check Stock