Top Stainless Steel Pipe Fitting Reviews

Ultimate Washer 18709 3/8-Inch Stainless Steel Quick Connect Pressure Washer Adapter Set, Max Pressure 5000 PSI Rating

  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Plug.
  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Socket.
  • Withstands MAXIMUM PRESSURE up to 5000 PSI.
  • UNIVERSAL Fitting for most Gas Power Washers.
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cap, 1/16\ Tube OD

  • Cap for closing the end of a pipe or fitting.
  • Fitting connects to tubing on its open end.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

Parker Hannifin 12-12-12 FT-SS Stainless Steel Female Tee Pipe Fitting, 3/4\ FNPT x 3/4\ FNPT x 3/4\ FNPT

  • T-shaped pipe fitting for connecting and branching three pipes.
  • Female National Pipe Taper (NPT) threads on run and branches for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

SharkBite UC256LFA10 3/4

  • ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
  • AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
  • COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
  • QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ... is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows maximum airflow for the furnace work through the mesh screen vent termination cap as an outdoor conduit.
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Two Little Fishies ATL5410W 6-Piece Plastic Hose Clamp Set, 3/4-Inch

  • WHAT YOU WILL GET? – The hose clamp kit comes with totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
  • DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
  • NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
  • EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfec....
Check Stock

SHURFLO 255-325 1/2\ Barb Swivel Nut Strainer

  • Mini "T" line strainer pipe fitting for adding filtration to a pipe line.
  • Glass reinforced polypropylene for resistance to most chemicals and dimensional stability, and stainless steel 304 screen for resistance to corrosion and extreme temperatures.
  • 1/2" female NPT threaded connection on both ends.
  • EPDM gaskets standard. FKM (viton type) available.
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

Steel Straight Conversion Adapter Fittins 304 SS Pipe Fitting Tube DSJ-M,YDF-LOK,LOK, Ferrule Connector 1/8'' 1/4'' 3/8'' 1/2'',3/8'',8mm Tube

  • Stainless Steel Pipe and Fitting 304 SS Pipe Fitting Tube OD to NPT Thread.
  • Thread sizes : 01: OD 9.7MM G1/8'' 02: OD 12.7MM G1/4'' 03: OD 16MM G3/8'' 04: OD 20MM G1/2''.
Check Stock

Milwaukee GIDDS2-2488111 9 Tungsten Carbide Sawzall Blades 3-Pack

  • For crimping round metal pipe to create a male fitting end.
  • Optimal handle span for maximum power and comfortable operating range.
  • Tungsten carbide blades built for extremely tough materials.
  • Designed to cut through hardwood flooring, cast iron, stainless steel, fiberglass materials, ceramic tile, stone, plaster, and more.
Check Stock