Top Stainless Steel Exhaust Tubing Reviews

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 JDM Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 Titanium Tip Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Overland Series Kit 19538 - Designed for the 1996-2002 Toyota 4Runner - 2.5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Dual Mufflers

  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • LIMITED LIFETIME CONSTRUCTION WARRANTY - Performance that lasts. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Worldmotop Exhaust Muffler Pipe for Yamaha V star 650 XVS650 XVS400 Dragstar 650 400 (chrome)

  • [Condition]: 100% Brand New, package including 2xExhaust Pipe,come with all necessary hardware-Will arrive during 3-5 days ,fastest delivery in 3 days..
  • [Muffler Exhaust]: A slip on muffler exhaust pipe , extend life of the exhaust-High quality powersports full exhaust systems..
  • [Fitment]: Suits for Yamaha V star 650 XVS650 XVS400 DS650 400 Drag star 400 Drag Star 650,please confirm with the model and year before purchasing,thanks..
  • [Stainless Steel]: High strength stainless steel exhaust tubing,anti-corrosion and durable,good working and won't rust exposed to high temperature or rain--No cutting or splicing ..
  • [Guarantee]: We promise satisfaction guarantee as we can.high quality product,excellent service,fast delivery-As the substantive gift for Thanksgiving,,Black Friday or Cyber Monday.And If you have any question, please contact with us first and we will try our best to help you solve the problem..
Check Stock

Vance & Hines Quiet Baffle for Shortshots Staggered and Sideshots Exhaust Systems 21301

  • Ideal for replacing rusted-out exhaust baffles.
  • Work great for custom fabrication as well.
  • Tubing is 22-gauge 409 stainless steel with 1/8 diameter holes, 3/16 staggered centers, 33 holes per square inch and 40% open area.
Check Stock

SPEEDWOW 2.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.0 Inch OD to 2.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

SPEEDWOW 3.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 3.0 Inch OD to 3.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 3.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

Tsudo S2 Burnt Tip Axle back Exhaust compatible for Mitsubishi Lancer 2012-16 4dr 5dr De/Es/Gt

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to....
Check Stock

KOTVTM Stainless Steel Elbow 2.5" 90° Mandrel Bend Elbow-Thickness 16GA/.065" Wall - SS304 Stainless Elbow Exhaust Tubing for Car Modified Exhaust Elbow Pipe, Stair Handrail,etc

  • 【Parameter】Stainless 2.5" Exhaust Pipe 90° Elbow, Diameter: 2.5", Bend Degree: 90°, Wall Thickness: 16GA /.065", Back arc length: 5.9 inch, (can be welded to 2.5" OD tube) Exhaust tubing.
  • 【Features】 Stainless 2.5" 90° Elbow Exhaust Pipe, Made of SS304 stainless steel, Durable: Not easily damaged, No rust, anti-oxidation, Mirror polishing.
  • 【Package】 90° degree elbow elbow exhaust pipes.
Check Stock