Top Stainless Steel Cold Drawn Reviews

Bessey Tools HS-12 12\ Wood Hand Screw Clamp, Large Diameter Spindles

  • Large Diameter Spindles For Added Strength & Durability.
  • Spindles & Swivel Nuts Are Made From Cold Drawn.
  • Acme Thread For Rapid Operation & Years Of Hard Use.
  • Hardwood Handles Are Over-Sized For Comfort.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

Stainless Steel Rods 13 Pcs 9.85\Length Diameter 0.12\ to 0.31\ Steel Rod, Metal Rod for Hardened Shaft. Metal Rods for Crafts, Steel Bar and Metal Bar for Rc Axles, Knife Handle Pins by PrimeArt

  • THE COMPLETE PACKAGE:Steel bar stock set include 0.12"/3 mm 3 Pieces, 0.16"/4 mm 3 Pieces, 0.20"/5 mm 3 Pieces, 0.24"/6 mm 2 Pieces 0.31"/8 mm 2 Pieces in diameter. All Stainless steel bars' length is 9.85"/250 mm. Our difference from others.
  • we offer metal bars in different diameters of 9,85 inches in length. Almost, 2.5X longer than our competitors. You can easily cut with a metal saw according to your needs..
  • PRODUCT TYPE:Stainless steel rods are made of quality 304 stainless steel, with no harm to humans. Stainless steel bar has high corrosion resistance. The surface of the steel rod is smooth. Easily welded or formed. Metal bars are chamfered on both ends and polished, easier to install linear bearings, and won't hurt fingers when installing it..
  • APPLICATION:stainless steel round bar stock widely used such as gear, shaft motor, short support shaft, shaft pocket model, miniature axle, model plane, ships, cars, metal dowel, stainless steel toy axles, fintorp rail, wheelbarrow axle, knife pins, handle pins and stainless steel pins, etc stainless steel pins, etc.
  • QUALITY:The stainless steel rod is cold-drawn 304 stainless steel and polished. The metal rod is hot-rolled, pickled, and annealed which have strong rust-resistant and corrosion-resistant, stu....
Check Stock

Bobrick 270 Contura Sanitary Napkin Receptacle, Rectangular, Stainless Steel, 1gal (Pack of 4)

  • Secured to cabinet with full-length stainless steel piano-hinge.
Check Stock

Hospital Specialty Co. Sanitary Napkin Floor Receptacle, Double Entry Swing Top, Metal, White

  • Secured to cabinet with full-length stainless steel piano-hinge.
Check Stock

Bonsicoky 2Pcs Ground Bus Bar Terminal Block, 5 Terminal Positions Wire Screw Terminal Brass Electrical Grounding Bars Block

  • 【Better electrical performance】: The excellent electrical conductivity of the copper material on the surface of the copper-clad steel grounding electrode makes its own resistance value much lower than that of conventional materials..
  • 【Wide range of applications】: Copper-clad steel grounding electrodes are suitable for grounding construction under different soil moisture, temperature, PH value and resistivity changes..
  • 【Low construction cost】: Compared with the traditional construction method of pure copper grounding rod and grounding strap, the cost of copper-clad steel grounding electrode is greatly reduced. (Moreover, it has the strength that the pure copper ground rod cannot reach)..
  • 【Unique manufacturing process】: The copper-clad steel grounding electrode adopts a cold-rolled and hot-drawn production process to achieve metallurgical welding between copper and steel. So as to ensure the perfect combination of copper layer and steel layer, it can be drawn arbitrarily like drawing a single metal without disjointing, peeling and cracking..
  • 【Superior corrosion resistance】: The copper clad steel ground electrode composite interface adopts high temperature 4D electroplating, the surface copper layer is ≥0.254mm/10mils, there is no resi....
Check Stock

Chapin International 8500B Chapin Professional Rock Salt Drop Spreader, Stainless Steel, 200 Lb, Stainless

  • Weld free all stainless design that holds 200 lbs..
  • Hopper is 36" deep drawn stainless steel design.
  • Discharge holes located behind wheels for a full 36" drop width.
  • Linkage is independant left and right solid linkage gate controls.
  • Drive train has a split axle where wheels drive left and right agitator independently and breaks up salt.
  • Stainless steel drive chains which resist corrosion and provides unfailing torque to destroy clumps of salt.
  • 12" wide tread pneumatic tires for maximium traction.
Check Stock

Bobrick B-270 Sanitary Napkin Disposal, Contura Series Surface Mount 1.0-Gallon - Satin Finish Stainless Steel

  • Surface-mounted sanitary napkin disposal Made of type 304 stainless steel with all-welded construction Exposed surfaces have satin finish Front of sanitary napkin disposal has degree of arc Cover is drawn, one-piece, seamless construction Cover is secured to container with a full-length stainless steel piano-hinge Container has an integral finger depression for opening cover.
Check Stock

Grex P6/15-ST 23 Gauge 5/8-Inch Length Stainless Steel Headless Pins (5,000 per Box)

  • Designed to use with P630, P635, P645 and P650 Grex pinner.
  • Durable yet flexible collation minimizes strip fragmentation.
  • 23-Gauge stainless steel headless pins are designed to use with p630, p635, p645 and p650 grex pinner.
  • Precision drawn wire guarantees consistent accurate pins.
  • Optimized tensile strength for each pin length.
Check Stock

Parker 10 TX-S Triple-Lok Flare Sleeve 5/8 JIC Steel

  • Not flaring, soldering or other tube preparation.
  • One piece nut and sleeve reduces installation time.
  • Use with chopper, seamless steel and thermoplastic tubing.
  • Steel tubing must be cold drawn and annealed seamless low-carbon per sae J524 with a maximum hardness of Rockwell B65.
Check Stock

Bessey Bar Clamp Set, F-Style Sliding Arm

  • Price For: Each Item: Bar Clamp Set Swivel Type: Replaceable Application: Heavy Duty, Maintenance, Welding, Assembly, Construction and General Purpose Clamping Handle Material: Forged Steel Type: F-Style Sliding Arm Bar Material: Cold Drawn, Heat Treated, Tempered Alloy Steel Includes: (2) Mfr. No. GS12-8K, (2) Mfr. No. GS20K, (2) Mfr. No. GS30K Pad Type: Standard.
  • Country of Origin (subject to change): Germany.
Check Stock

Thermos Stainless King 16 Ounce Food Jar with Folding Spoon, Matte Black

  • Extra wide mouth is easy to fill, serve from and clean.
  • Cool to the touch with hot liquids, sweat-proof with cold.
  • full size folding stainless steel spoon included.
  • Thermos double wall vacuum insulation for maximum temperature retention, hot or cold.
  • Wide mouth is easy to fill, eat from and clean.
  • Thermos vacuum insulation technology for maximum temperature retention, hot or cold, keeps liquids hot for 7 hours and cold for 9 hours.
  • Compact and insulated stainless steel serving bowl.
  • Cool to the touch with hot liquids, sweat proof with cold.
  • Durable stainless steel interior and exterior.
Check Stock

Kslong Cream Horn Molds 12pcs Large Size 4.7 inch Baking Cones Stainless Steel Roll Horn Forms Conical Danish Pastry Croissant Cones Moulds

  • Size:Height: 4.7 inch diameter: 3.5cm Material:High quality Stainless Steel.
  • Our full-sized Mould are made from Stainless Steel,so it is easy to wash，Non-toxic,it is environmentally friendly..
  • Our molds are perfect for your oven,and you just need to bake according to the recipe instructions.After baking,a rolling mould can be drawn out to leave a cavity for filling in the bread,which makes filling more convenient..
  • Stainless Steel has excellent heat regulation properties, so when you follow the recipes accordingly, non stick baking is assured..
  • Storage easily in small areas,Mold retain their original shape, no more storage or stacking problems..
Check Stock

1144 Steel Round Rod Unpolished Mill Finish Cold Drawn Stressproof Temper ASTM A311 0.25 Diameter 48 Length

  • 1144 carbon steel provides better machinability than 1045 carbon steel and offers good strength, wear resistance, and hardness.
  • Cold drawn through a die to create the shape.
Check Stock