Top Stainless Steel Brake Lines Reviews

Rough Country Front Stainless Brake Lines (fits) 71-78 Chevy GMC Trucks | Suburban | Blazer | Jimmy | 4-6' Lift | 89340S

  • DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines..
  • Stainless Steel replacements offer superior protection and a seriously long lifespan..
  • Braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines..
  • Durable outer layer prevents expansion of the internal Teflon layer. High Quality hollow fasteners at both ends of each brake line and at both ends provide a leak-free flow path..
  • Backed by Rough Country's Lifetime Replacement.
Check Stock

JXshangmao Clutch Cable Throttle Cable Line Wire Clutch Cable for Yamaha Warrior 350 YFM350X 1987-2004 for Yamaha Warrior

  • This is a High Quality Complete Stainless Steel Braided Cable-Brake Line kit with Wire Extensions for installing taller handlebars on your Harley..
  • Stainless Steel Braided Cables and Brake Lines have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing..
  • Motion Pro Cables have a PTFE protective inner coating for an easier pull and provide longer life. Hill Country Customs Brake Lines have a PTFE protective inner liner to minimize brake line expansion and provide longer life..
  • Our Wiring Harness Extensions are Color Coded to closely match the factory wiring..
  • This Cable Kit fits 1996-2006 Harley Softail models with Single Disc Front Brakes. Please read the Special Features and Description sections in this listing and then advise us of your Harley's Information: Year, Exact Model #, the Brand & Height of Handlebars, What is the handlebar Riser Height (1" to 6" tall)?.
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

Hill Country Customs Complete Stainless Cable Brake Line Kit for 14\ Tall Handlebars 1996-2006 Harley Softail Models HC-CKC21214-SS

  • This is a High Quality Complete Stainless Steel Braided Cable-Brake Line kit with Wire Extensions for installing taller handlebars on your Harley..
  • Stainless Steel Braided Cables and Brake Lines have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing..
  • Motion Pro Cables have a PTFE protective inner coating for an easier pull and provide longer life. Hill Country Customs Brake Lines have a PTFE protective inner liner to minimize brake line expansion and provide longer life..
  • Our Wiring Harness Extensions are Color Coded to closely match the factory wiring..
  • This Cable Kit fits 1996-2006 Harley Softail models with Single Disc Front Brakes. Please read the Special Features and Description sections in this listing and then advise us of your Harley's Information: Year, Exact Model #, the Brand & Height of Handlebars, What is the handlebar Riser Height (1" to 6" tall)?.
Check Stock

37 Degree AN Flare Tubing Standard Tube Flaring Tool

  • Makes clean, accurate 37 degree single flares for AN hard lines every time.
  • For soft metal tubing such as aluminum, copper, and mild steel, perfect for brake or fuel lines.
  • Works on 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8" OD tubing.
  • Will NOT make 45° flares for standard brake and fuel lines that are NOT compatible with AN hardware.
  • Not recommended for use on Stainless Steel.
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • ...proof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1 x 3.5 inch....
Check Stock

4LIFETIMELINES 25 ft 3/16 316L Marine Grade Stainless Steel Brake Line Replacement Tubing Coil and Fitting Kit, 16 Fittings Included, Inverted Flare, SAE Thread, 0.028 inch wall thickness

  • [Complete Brake Line Replacement Kit] This complete stainless steel kit contains all parts necessary to replace a 3/16” brake line.
  • [Marine Grade] Our stainless steel brake lines are manufactured using 316L stainless steel with added molybdenum for superior corrosion proof properties.
  • [Extreme Strength] The included stainless steel fittings provide 2x the tensile yield strength as mild steel or brass fittings.
  • [16 Fittings Included] (2) 3/16 (7/16-24 Inv), (4) 3/16 (3/8-24 Inv), (2) 3/16 (M10 x 1.0 Bub), (2) 3/16 (M10 x 1.o Inv), (2) 3/16 (9/16-18 Inv), (2) 3/16 (1/2-20 Inv), (2) 3/16 (M12 x 1.0 Bub).
  • [Meets All Specifications] Meets all SAE J16776 and ASTM A249 specifications.
  • [Lifetime Warranty] All of our products are backed by our 4LifetimeLines Limited Lifetime Warranty.
Check Stock

Power Stop KOE4466 Autospecialty Front and Rear Replacement Brake Kit-OE Brake Rotors & Ceramic Brake Pads

  • Comes with everything you need to get the job done, including stainless steel installation hardware and high temperature ceramic brake lubricant. Custom Options Optional Powder Coated Calipers, Optional Stainless Steel Brake Lines.
  • OE style replacement rotors are mill balanced to ensure a smooth ride. Bolt-On Ready.
  • Z17 Clean Ride ceramic brake pads low dust formula validated through on-vehicle 3rd party tests in Los Angeles City Traffic.
  • Dual layer high temp rubberized shims insulate noise for virtually silent braking.
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

4LIFETIMELINES Fitting Assortment 1/4 Tube Nut Union Adapter 8 SKU

  • Contains 8 SKU, fast moving 1/4" fittings to keep on hand when working with automotive hydraulic braking systems.
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast-moving brake line fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling brake fittings quick and easy..
  • Compatible with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel brake lines.
  • Lifetime warranty included on all products purchased from 4Lifetimelines.
Check Stock

BUCKLOS Mountain Bike V Brake Set for Most Bikes V-Brake Calipers with 2PC MTB Road Bicycle Universal Brakes Line Cable Housing and Brake Levers (Front and Rear) City Bike Black Durable

  • 【Complete brake replacement set】It includes a pair of V-brake brakes (and a pair of replacement brake pads), 2 general stainless steel brake lines for mountain highway vehicles (front and rear), 1 brake line protection hose and a pair of brake levers..
  • 【Sturdy and durable】V brake caliper are made of high quality alloy carbon steel, high strength, corrosion resistance, and more durable..
  • 【Quiet braking】The brake pad of V brake clamp adopts all-weather braking formula rubber, which does not damage the rim, is more wear-resistant and braking is quieter..
  • 【Brake kit size】Brake line (front 43.3 inches, rear 66.9 inches) brake line protection hose 98.4 inches, brake arm 4.9 inches, brake pad 2.2 inches, extended size, suitable for most V-brake bicycles.
  • 【Reminder】Before purchase, please carefully check whether there are V brake mounting holes on the front fork and rear fork of your bicycle.
Check Stock