Top Stainless Steel Band Clamp Reviews

EVIL ENERGY 3.0 Inch Stainless Steel Exhaust V Band Clamp Quick Release Mild Steel Flat Flange

  • Application: V band clamp work very well in operating conditions involving stress, vibration and extreme temperature fluctuations,such as exhaust....
  • DESIGN:Each assembly consists of two mild steel flat flanges and one 304 stainless steel v-band clamp,providing a perfect overlap seam for welding.The....
  • ADVANTAGE:One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • ADVISE : You can use a drop of anti-seize on the clamp’s retaining nut. This helps extend the life of the clamp and protects the ability of the....
  • The 3.0" V band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping experience....
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping

  • ...ons. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
  • Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
  • Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
  • No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm drive clamp is very smooth, no need to apply hard pressure!.
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

BAND-IT C00169 Banding Tool

  • Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed.
  • Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping.
  • Spring loaded gripper lever improves ease of use.
  • Blue, epoxy powder coated finish resists corrosive elements.
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to....
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers For Atv,cv Boot Tool Kit,cv Boot Tools,cv Joint Boot Clamp Pliers Kit,cv,Joint Boot Clamp Pliers,cv Boot Banding Tool,cv Joint Band Clamp Tool,cv Joint Clamp Tool.
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock