Top Stainless Steel Assembled Manifolds Reviews

The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

Schneider Electric AG13B020 Tac Erie Spring Return Two-Position General Close-Off Actuator Without End Switch, Normally Closed

  • Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
  • Accurately controls the flow of fluid through individual radiant loops.
  • Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Z Whip SBC Stainless-Steel Exhaust Header Bolt Kit 1” 3/8-16 Bolts Compatible with Chevrolet V8 Small Blocks 265 283 305 327 350 383 400 Gen I & II 92-97 LT1 LT4 TPI TBI 96-98 Vortec 5.0L 5.7L BOP

  • Compatible with all 1955-1998/99 Chevy Small Block Exhaust Headers with up to ½” Thick Flanges 265 283 305 307 327 350 383 400 (These do not fit oem manifolds).
  • Also Compatible with Pontiac Buick Oldsmobile 326 350 389 400 421 455 V8 Engines Using Exhaust Headers with up to ½” Thick Flanges (These do not fit oem manifolds).
  • These are High Grade 18-8 Stainless-Steel Steel 3/8-16×1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
Check Stock

Keenso Th350 Kickdown Cable, Silver Stainless Steel Braided Kickdown Cable For 350 Turbo Transmission Assembly Detent Kickdown for Chevy TH350

  • 【Compatibility With】-- Th350 Kickdown Cable, fit for GM(Chevy, Olds, Pontiac, etc.)350 TH350 Transmissions. Please check the vehicle model before purchasing.
  • 【Durable Stainless Steel】-- Our th350 long kickdown cable is made of premium staninless steel material, sturdy and solid, durable for long lasting performance.
  • 【Specifications】-- Material: Stainless Steel, Color: Silver, Package Weight: approx. 160g, Fitment: for GM(Chevy, Olds, Pontiac, etc.)350 TH350.
  • 【Wide Application】-- This ickdown cable for 350 turbo transmission is adaptable to all types of manifolds, universally applied.
  • 【Easy to Install】-- Our kickdown cable turbo 350 is easy to install, very practical and simple, perfect replacement for the old one.
Check Stock

GT45 13PC T4 TURBO KIT+MANIFOLD+INTERCOOLER CHEVY SMALL BLOCK LSX CAMARO LS1

  • Mustang Fox Body Twin Turbo High Performance Package.
  • Bolt on Aluminum Intercooler with Intercooler Piping kit.
  • Kit now feature Internally Wastegated Turbo Units for ease of installation.
Check Stock

GHmarine 807166A2 Exhaust Water Shutter Kit for Mercruiser Stern Drive 4.3L V6 Engines

  • Exhaust Flapper/Shutter for Mercruiser Part #: 807166A2.
  • Fit for Mercruiser V6 4.3L One Piece Manifolds Only.
  • Package contains 1Flapper and 2 Grommets.
  • Made of Premium Stainless Steel and CR Rubber, High Hardness and Durable, Best Price OEM quality, Ideal Shutter for your selection.
Check Stock

Loctite 518 51817 6ml Red Gasket Eliminator Tube

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area..
  • MULTI-USE. Valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housing as well as industrial furnaces, ovens, etc..
  • CONVENIENT CURING. Tack-free in 1 hour. Full-strength in 24 hours..
  • LOCTITE 596 RTV RED SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

JIUNENG 3Pcs Dome Mounted Sanding Mop Polishing Pad Nylon Fiber Buffing Wheel 320 Grit

  • Specially designed for polishing recessed aread such as mag wheels, motorcycle wheels manifolds,metal, jewelry, metal, stainless steel, aluminum products, wood, plastics, ceramics, glass and watches industry of surface grinding and polishing..
  • These sanding mops are constructed from nylon web, impregnated with abrasive grains. The nylon has a high level of resistance to pulling and ripping..
Check Stock

8pcs Polishing Wheel for Drill, Buffing Wheel Polisher Kit with 1/4" Hex Shafts (8)

  • Polishing Wheels for final polishing of interior, flat and irregular surfaces. Specially designed for polishing recessed area such as mag wheels, motorcycle wheels manifolds..
  • Our polishing wheel sets are made of cotton material..
  • Suitable for metal, jewelry,stainless steel, aluminum, wood, plastics, ceramics, glass..
  • This drill buffing Wheel kit include 6 pieces cotton wheel +2 pieces polishing wax(fit for metal polishing)..
  • Different size and shape fit for buffing different area..
Check Stock

POWERGO MOTORSPORT 1152403820 1-1/2 x 2-5/8 inches 304 Stainless Steel Shorty Headers for C1500 C2500 K1500 K2500 Suburban Blazer Jimmy Tahoe Yukon | 5.0 5.7 305 350 V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM, which brings excitement to street driving and is ideal for street racing.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16 in. (11.5mm) thick steel plates and flattened by hydraulic press.
  • Polished surface for extra resistance against rusting.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0

  • Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
  • Cast passenger and driver side manifolds.
  • -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check Stock

Fuzbaxy 8PCS Spark Plug Wire Boots 6 inches 2500° Heat Shield Protector Sleeve with 16pcs Stainless Steel Wire Ties(Black)

  • Spark Plug Wire Boot Length: 6 inch,Spark Plug Wire Boot works with most 90 Degree ,45 Degree and straight spark plug boots..
  • Package Included :8pcs Spark Plug Wire Boot and 16pcs Stainless Steel Wire Ties..
  • Universal fit most straight or angled boots.GM,Chevy,GMC,Cadillac,Buick,Ford,Dodge..
  • Double layer construction for added durability.Made of Titanium that Can hold 1600~2500 degree F..
  • Protect spark plug boots and wires from extreme temperatures generated by vehicle exhaust headers and manifolds.If received it missing some parts,pls contact us will replacment it..
Check Stock