Top Square Weld Nuts Reviews

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

uxcell M6 Carbon Steel Slab Base T-Shaped 2 Projection Weld Nuts Pack of 25

  • Made of carbon steel in dark grey, sturdy and durable..
  • Size: 23 x 14 x 8mm / 0.91" x 0.55" x 0.31"(L*W*H).
  • Weld nuts,designed to stand off the material to allow easy weld penetration,widely used to industrial machine..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

The Hillman Group 160300 1 1 1 1/4-20 Square Nut 100-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Square nuts are used along with flat washers in order to avoid damage from their sharp edges and help to increase the strength of the fastener.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 160293 1 1 1 6-32 Square Nut, 100-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Square nuts are used along with flat washers in order to avoid damage from their sharp edges and help to increase the strength of the fastener.
  • Zinc-plated for moderate corrosion resistance.
  • Product Dimension: 2.31" x 2.68" x 1.56".
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Coyote-Powered ’04 Mustang GT Gets Put on Rails! Incredible Suspension Upgrades!

  • Universal Application: Parallel 4 link suspension kit fit for Hot Rod Rat Rod Trucks Classic Cars.
  • Improve Ride Quality: 4 Link kit provides a safe and quality ride with improved handling and cornering performance.
  • Reinforced Steel Bars: Heavy-duty steel bars have carbon steel heim joint rod ends, construct a sturdy and durable suspension link system for your vehicle.
  • Complete 4 Link Kit: 5 Steel bars, 4 weld-on axle mounts, 4 weld-on fame mounts, 4 panhard brackets, 10 hex head bolts with nuts, and 10 heim joints (M16*1.5mm) 5/8".
  • Dimensions: Link bars are 24" long, tube outside diameter is 1.25" with 0.157" wall thickness. No instructions included, message us if you have any questions.
Check Stock

CURT 83770 5 x 5-Inch Weld-On Trailer D-Ring Tie Down Anchor 46,760 lbs Break Strength

  • VERSATILE. This weld-on D-ring tie down anchor is great for securing cargo loads on heavy-duty flatbed trailers and flatbed trucks.
  • HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver....
  • EASY TO USE. Once installed, this bull ring tie down anchor is fast and convenient to use. The 5-inch x 5-inch x 1-inch trailer shackle provides a....
  • HEAVY-DUTY. This trailer D-ring tie down is constructed from solid, forged steel for heavy-duty strength. The weld-on bracket measures 2-1/4 inches x....
  • READY TO WELD. This trailer tie down ring comes with a raw steel finish to be ready for welding right out of the package.
Check Stock

CURT 83750 4-1/4 x 4-1/4-Inch Weld-On Trailer D-Ring Tie Down Anchor 18,000 lbs Break Strength

  • VERSATILE. This weld-on D-ring tie down anchor is great for securing cargo loads on heavy-duty flatbed trailers and flatbed trucks.
  • HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver....
  • EASY TO USE. Once installed, this bull ring tie down anchor is fast and convenient to use. The 4-1/4-inch x 4-1/4-inch x 5/8-inch trailer shackle....
  • HEAVY-DUTY. This trailer D-ring tie down is constructed from solid, forged steel for heavy-duty strength. The weld-on bracket measures 2-1/4 inches x....
  • READY TO WELD. This trailer tie down ring comes with a raw steel finish to be ready for welding right out of the package.
Check Stock

The Hillman Group 3342 3/4-10 Square Nut Zinc Plated 5-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 3338 3/8-16 Square Nut Zinc Plated 25-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock