Top Square Square Bolts Reviews

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

3/8-16 x 1-1/2' Carriage Bolts and Nuts Kit, Round Head Square Neck Screws, Stainless Steel 18-8 (304), 10 Sets

  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
  • Due to the head there is no groove type that can be used with a power assisting tool. It can also be hidden during actual use to prevent disassembly..
  • High Quality Material 18-8 (304) Stainless Steel Carriage bolts Used widely in the home and office appliances, communication equipment, ship assembly, and other machinery industry..
  • Package Included: 10 PCS Carriage Bolts, 10 PCS Hex Nuts and 10 PCS Flat Washers..
Check Stock

1 1/2\ X 5/8\ Square Post Female Hinges for Chain Link Fence Post | Hinges with Bolts | Pack of 2

  • Designed to fit 1 1/2" square fence posts.
  • Comes with carriage bolts and nuts sized 3/8" x 2 1/2".
  • Made from high-quality and durable galvanized pressed steel.
  • Helps to connect square chain link fence posts to square gate frames.
Check Stock

OEMTOOLS 22711 10 Piece Triple Square Bit Socket Set, 1/2', 1/4', and 3/8' Spline Socket Set for Triple Square Screws and Bolts

  • TRIPLE SQUARE SPLINE SOCKET SET: Our triple square spline tool set is a must-have for tightening and loosening high-torque triple square screws and bolts.
  • Triple square bit set is constructed with superior materials for increased torque and hardness.
  • WORKS WITH MANY VEHICLES: These triple square drive sockets are designed to operate on European automotive vehicles.
  • 12 point triple square bit set is for use with BMW, Mercedes, VW, Audi, Porsche, and most other European vehicles.
  • CONVENIENT FEATURES: This socket set comes with high-strength chrome vanadium steel sockets to increase turning power.
  • Triple square drive bit ends insert smoothly into fasteners while protecting bits and fasteners from damaged edges.
  • HEAVY DUTY SOCKET TOOL SET: Our socket set features heat-treated alloy steel bits to reduce premature wear.
  • Triple square socket kit bits have a fully refined hard chrome plated finish and zinc phosphate treatment to prevent corrosion.
  • CONVENIENT STORAGE: The triple square spline drive socket set comes in an enclosed storage case for easy identification, portability, and storage.
  • European socket set has 1/4", 3/8", and 1/2" drive sizes.
Check Stock

The Hillman Group 3342 3/4-10 Square Nut Zinc Plated 5-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 3338 3/8-16 Square Nut Zinc Plated 25-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 3336 1/4-20 Square Nut Zinc Plated, 40-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

The Hillman Group 3339 7/16-14 Square Nut Zinc Plated, 12-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs

  • 1 bag of approximately 100 M3 stainless steel square head bolts (12mm) designed for MakerBeam (10x10mm in diameter)..
  • 1 bag of approximately 25 M3 stainless steel square head bolts (25mm).
  • With hex hole for easy use with hex nut driver.
  • All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times.
  • MakerBeam enables professional prototyping and provides mechanics for any electronics project.
Check Stock

OEMTOOLS 23906 10 Piece Magnetic Triple Square Bit Socket Set, Triple Square Socket Set for European Vehicles, Includes Sturdy Storage Case

  • If the Socket Fits: Powerful magnets in this triple square bit socket set prevent nuts, bolts, or fasteners from being dropped.
  • Never worry about losing hardware on the job again.
  • Easy to Reach: Triple square sockets measure 2” long for easy access in tight, awkward spaces.
  • Fit the right bit to your socket wrench for hassle-free repairs.
  • Endure the Elements: This drive socket set is made from S2 steel to reduce premature wear.
  • The chrome plated finish and zinc phosphate treatment also prevent rust and corrosion.
  • All in One: Square driver set includes 1/4", 3/8”, and 1/2" drive triple square bits ranging from M4-M18.
  • This 12 point square socket set will have you prepared for many projects.
  • Ready to Go: This 12 point triple square bit set includes a storage case for secure transport.
  • The XZN square bolt socket set features embossed bit sizes for easy identification.
Check Stock

NEIKO 10056A 1/4-Inch 3/8-Inch & 1/2-Inch Drive XZN Triple Square Spline Bit Socket Set | 10 Piece Set | Cr-V Sockets and S2 Steel Bits

  • [VERSATILE]: This fastener bit set features 10 metric bits with the 3 largest sizes being tamperproof. Triple-square spline sockets are ideal for use with tamperproof lug nuts, cylinder head bolts, and other engine bolts..
  • [DESIGN]: This kit can convert standard square drives to triple square bits and is designed to eliminate camout and recess fallaway with elliptically based geometry and vertical sidewalls..
  • [PREMIUM QUALITY]: High-strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance and S2 alloy steel bits reduce wear-outs and ensure longevity and the tamperproof bits are made of CrV for extra strength..
  • [PRECISION]: Precisely machined bit tips ensure accurate size with a 0° drive angle that eliminates radial force preventing fastener recesses and gives access to nuts and bolts on European and Japanese cars and trucks..
  • [INCLUDES]: Set includes 1/4" drive (4mm, 5mm, 6mm), 3/8" drive (8mm, 9mm, 10mm, 12mm, tamperproof 14mm) and 1/2" drive (tamperproof 16mm and tamperproof 18mm)..
Check Stock

Glvaner (8 Sets) 5/16-18 x 2-1/2' Stainless Steel Carriage Bolts Screws Round Head Square Neck and Hex Nuts & Flat Washers 304 Stainless Steel 18-8 Full Thread Coverage

  • Package Includes: 8 Pcs Carriage Bolts (5/16-18 x 2-1/2") + 8 Pcs Hex Nuts (5/16"-18)+ 8 Pcs 5/16" ID Flat Washers.
  • Screw length (including the neck): 2-1/2 inch or 63mm.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
  • Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
Check Stock

Dreneco Square Plate Washer, Stainless Steel Heavy Duty Square Washers M3×16×1,50 pcs

  • Material: Durable 304 stainless steel.Compared with normal stainless steel,it's safer, more durable,non-toxic and corrosion resistant.It is of high hardness and not easy to deform.It can be used in outdoor humid environment..
  • Features: Designed to be used in conjunction with carriage bolts for the securing of roof trusses but can also be used in a variety of ways on many different projects.Can be used with all types of bolts and nuts..
  • Usage: Ideal for use with carriage bolts in structural timber fastening applications such as joist work and decking.Large surface area suitable for heavy duty fastening..
  • Wide Application: Square plate washers can be used for many industries and for many different exterior applications.Often used in timber construction, since they develop more friction when tightened against wood. They are also suitable for a variety of applications where a heavy washer is required..
Check Stock