Top Square Drive Pan Head Screws Reviews

Richelieu Hardware 4821FBB Full Mortise Ball Bearing Butt Hinge 3 1/2-inch (89 mm), Black, 2 Piece

Non-removable pin, flat tip, square corner | Ball bearing mortise hinge.
Height x width x thickness: 3 1/2 in (89 mm) x 3 1/2 in (89 mm) x 1/8 in (3 mm).
Box of 2 | Included: mounting hardware is included for an easy installation (flat head phillips/square drive wood screws and 10 x 1/2" flat head phillips/square drive machine screws).

Check Stock

LIONMAX Wood Screws #8 x 2 Inch, Pocket Hole Screws 300PCS with Coarse Thread, Washer Head Square Drive, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
【Package】: #8 x 2 Inch Pocket Hole Screws 300 Pieces, 150MM Square Drive Bit Included..

Check Stock

Stainless Steel Pan Head Self Drilling Screws #6 x 1/2\ (3/8\ to 3-1/2\ Lengths Available) 100 PCS, Phillips Drive Self Tapping Screws Sheet Metal Screws, Full Thread

Package Content: 100pcs x Pan Head Phillips Screws.
Thread Size (D*L): #2 X 1/4 inch, Please check the size of the screws before purchasing.
Material: 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole.
Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillip screw driver.

Check Stock

LIONMAX Pocket Screws #8 x 1 Inch, Wood Screws Coarse Thread 600PCS, Washer Head Square Drive Screws for Pocket Hole, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
【Package】: #8 x 1 Inch Pocket Hole Screws 600 Pieces, 150MM Square Drive Bit Included..

Check Stock

Leadrise 50-Pack M6 x 16mm Computer Rack Mount Cage Screws and Nuts & Washers for Rack Mount Server Cabinet Rack Mount Screw Cage Nut - Black

★【RELIABLE QUALITY:】Made of top quality carbon steel, black nikel plated. It is not easy to rust, has stable performance, corrosion resistance....
★【SPECIFICATIONS: 】0.63 ''/ 16 mm M6 Thread by 1/2" Long Phillips Pan Head Screw, 50x M6 Cage Nuts, 50x M6 Pan Head Screws, 50x Washers.
★【WIDE APPLICATION:】M6 Rack Mount Screw Kit is great for mounting your rack server cabinets, server shelves, A/V device enclosures, and more.....
★【SQUARE CAGE NUT: 】Square cage nut designed for racks and cabinets with square holes, Mounting your standard rack mountable equipment into a....
★【STANDARD METRIC:】Our M6 screws and lock nuts conform to the standard metric system. The average error is less than 0.01mm. The thread is very....

Check Stock

Richelieu Hardware 42821FBB Onward Full Mortise Ball Bearing Butt Hinge, 3 1/2 in (89 mm), Black, (2 Pack)

Add the finishing touch to your project with our variety of butt hinges.
For interior doors | Load Capacity per 3 Hinges: 50 lbs.
Height: 3 1/2 in (89 mm) | Width: 3 1/2 in (89 mm) | Thickness: 1/8 in (3.1 mm).
Removable Pin | Flat Tip | 1/4" Radius Corner | Finish: Black, made of Steel.
Pack of 2 | Included: Mounting hardware is included for an easy installation (flat head Phillips/square drive wood screws and #10 x 1/2" flat head Phillips/square drive machine screws) | This product ships in Onward packaging, Onward is a division of Richelieu Hardware.

Check Stock

Fastenmaster Wood Screw 4 ' Pack 250

Stainless Steel Wood Screws Provide the Ultimate in Corrosion Resistance. 305 Stainless Steel..
Stainless Steel Screws are The Screw for the Job for Coastal Applications & Many other Applications..
Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation..
Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power..
Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads..

Check Stock

DEWALT Bit Set with Magnetic Drive Guide (DW2095)

Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping.
Get consistent results every time thanks to the magnetic guide system.
Drive screws up to four inches in length.
Set includes: Square/Phillips/flat head bits, 2-inch magnetic drive guide, 4-inch magnetic drive guide.

Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

[ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
[ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
[ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
[ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
[ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..

Check Stock

#10 x 3/4' Pan Head Sheet Metal Screw, 304 Stainless Steel 18-8, Phillips Drive Self Tapping Screw, Round Head Wood Screw, Bright Finish, Full Thread, Pack of 50

Package Includes: #10 x 3/4" Pan Head Sheet Metal Screws or Wood Screws.
Screw Length: 3/4 inch or 19mm (including the height of the head), Diameter of the head: 9.5mm (Approximately).
Our deep cut phillips drive ensure the bit fits deep and snug in the head to help reducing stripping..
Usage: Wood, Metal and other tough materials.
Made of 100% 304 Stainless Steel (no coating outside), provides good strength and corrosion resistance in bad environments..

Check Stock

#10 x 1-1/4 50 Pack Stainless Steel Phillips Pan Head Wood Screws Stainless Steel 304 18-8 Pan Head Sheet Metal Screws Self Tapping Screws

Thread Length: 1-1/4 inch or 32mm (not including the head).
Phillips pan head sheet metal screw, Sheet Metal Tek Screws, or Pan Head Self Tapping Screw.
Material: High Quality 304 Stainless Steel, great strength and good corrosion resistance to make fasteners last!.

Check Stock

El Tornillo Y La Tuerca

√ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
√ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
√ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
[Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
√ [Come With A High Hardness Storage Box, Easy To Use And Stor....

Check Stock

#8 x 1-1/4\ Bronze Star Exterior Coated Modified Truss Head Cabinet Wood Screw Torx/Star Drive Head (Full Box - 4000 APX. Screws) - Multipurpose Exterior Coated Torx/Star Drive Wood Screws

High Performance Exterior Coated Torx/Star Drive Wood Screws (Full Box (Approx. 4000 screws)).
Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance..
Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods.
Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power.
Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads.

Check Stock