Top Square Black Steel Pipe Reviews

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped..
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..

Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

...hreads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who wor....

Check Stock

2 Inch Square Plastic Plug, End Caps for Tubing Pipe OD 2\ x 2\ (not ID), Steel Chair Leg End Caps, Bar Stool Glides Inserts, Fence Plugs, Furniture or Fitness Equipment End Caps (12 Packs)

[How to Choose] – The 2" Square Plastic Plugs ONLY fit 2-Inch (2.0") OUTSIDE DIAMETER (not inside diameter) SQUARE TUBING or PIPE. Not fit for 2" inside diameter tubing or Pipe, and Not fit for round shape pipe or tubing either..
[SIZE] - The Square Plastic Plugs fit 2" (two inch) OD square tubing (2x2) with INSIDE hole diameters (ID) from 1 3/4" to 1 15/16" ( 1.75" to 1.93") and wall thickness of 0.040" - 0.123" (10-20 Gauge).
[FUNCTIONS] - Reduce noise, prevents scratching of your floor surface and protects your expensive furniture when furniture is moved. These tube plugs are also nice dress up for the ends of the gorilla lift square tubes, fitness equipment end caps, fencing post end caps, furniture gliding caps, and prevent the rain to come in and rust out the pipes..
[APPLICATION] - These high-grade black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on patio chair end caps, bench feet, table legs, bar stool glides inserts, chair leg protectors, patio furniture inserts, bar stool glides inserts, chair end caps, chair leg inserts, pool fence plugs and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
[PREMIUM QUALITY] - Made by high Grade heavy duty black polyeth....

Check Stock

AIRTOON 3/8 Drive Pipe Plug Socket Set 11-Piece SAE CR-MO Tapered Male Square Drive Chamfered Female Square Drive

Made from the finest chrome molybdenum alloy steel-the best choice for strength and durability..
This AIRTOON 3/8" drive pipe plug socket set includes male: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8".
and female: 1/4", 9/32", 5/16", 11/32", 3/8"..
Tapered Male Square Drive and Chamfered Female Square Drive, aligns socket to fastener quickly. IIt is very easy to deal with square plugs without rounding them..
The black coating with etched marking make it easy to read and find the socket size. Case is nice and compact and of good quality with a solid latch..
All AIRTOON Tools meet or exceed ANSI & DIN performance standards. It comes with 1 year quality guarantee..

Check Stock

Corona Hercules Post Hole Digger PD60000

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

Seymour DG-16 6-1/2-Inch Post Hole Digger

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

Check Stock

Mayouko 11PCS 3/8 Drive SAE Pipe Plug Socket Set Tapered Male Square Drive Chamfered Female Square Drive CR-MO

Includes: 11pcs 3/8"drive SAE pipe plug sockets: male: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8".
female: 1/4", 9/32", 5/16", 11/32", 3/8".
Made of impact grade chrome molybdenum steel with black phosphate finish..
Tapered male square drive and chamfered female square drive aligns socket to fastener quickly..
The storage hard case is lightweight which is convenient for storage and carry..
All Mayouko Tools meet or exceed ANSI & DIN performance standards. It comes with 1 year quality guarantee..

Check Stock

Rustic State Industrial Pipe Wall Bracket Rust Oil Free 10 Inch Black Set of 2

PIPE Type: black pipe 3/4" x 5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application.
PIPE SPECS: black coated schedule 40, 150 PSI.
PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air.
HIGH QUALITY: durable pipe steel materials manufactured using advanced technology.
RATING APPROVALS: meets ASTM standards and NSI technical specification.
EXTRA PROTECTION: shipped with plastic end caps to prevent pipe thread damage for the duration of transport.
DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture, shelves and accessories..

Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 1 Inch (1.0) Grey/PVC / 5 FT

Design unique projects for your bedroom, bathroom, kitchen, den, or dining room with authentic Pipe Décor black steel, Schedule 40 pipe. Stock up so you have connectors on hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x18-4..

Check Stock

Toledo Pipe H8S 6\-8\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels with Extra Cutter Wheels

Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job..
With only 4" of clearance required around pipe makes using this cutter anywhere possible..
Guide fingers ensure perfect wheel alignment for square cuts..
A closed 360° frame forces all energy into cutting the pipe for maximum efficiency..

Check Stock

3/4\ x 30\ Black Painted Industrial Pipe, Home TZH 4 Pack Threaded Black Iron Pipe Nipple for DIY Project/Furniture/Shelving Decoration(4, 30\)

Design unique projects for your bedroom, bathroom, kitchen, den, or dining room with authentic Pipe Décor black steel, Schedule 40 pipe. Stock up so you have connectors on hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x6-6..

Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..

Check Stock