Top Spraying Equipment Reviews

VEVOR Vari-Grind System, 24' Length of V-arm Vari-Grind Attachment, 3' x 5' x 1/4' Platform Grinding Jig, Fit for 0.63' Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm. Suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Complete Component: 6-piece set: A fish board ruler, two knife grinding support bases, two side supports, and an angle working bracket. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding j....
Check Stock

12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

  • 5L oil liquid suction pump extractor,Small size, easy to carry and storage.
  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
Check Stock

VEVOR Vari-Grind Jig, 3/4' Diameter of the Hole Vari-Grind Attachment, Fit for 0.63' Bowl Gouges Grinding Jig with Vari-Grind, Large Hole Vari-Grind Attachment for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm.
  • suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Easy to Install: The vari-grind side grinding jig is integrated for effortless installation. We will provide a hexagonal handle that can be installed by hand. Put the rod that needs to be processed into the hole, tighten the screw to fix the rod, and you can operate it on the grinder..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolveri....
Check Stock

3M High Power Spray Gun Cleaner, 26689, 15 oz (426 g)

  • PAINT SPRAY GUN CLEANER – Features a powerful cleaning formula in an easy-to-use aerosol can with wand that blasts paint from hard to reach areas.
  • LESS CLEANUP – Easy spray application reduces cleanup time for spray gun bodies, hard paint cups, atomizing heads, hoses and fittings.
  • USE FEWER SOLVENTS – Tight spray pattern helps reduce the use of cleaning solvents for removing paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats and sprayable adhesives from paint spray equipment.
  • VERSATILE – Removes waterborne and solvent-based coatings from metal spray equipment and composite/plastic components.
  • ideal for use on automotive and general industrial spraying equipment.
  • LOW VOC – Less than 25 g/L VOC, meets SCAQMD Rule 1171(c)(1) and other air quality regulations.
Check Stock

aokur DC 12V 5L Transfer Pump Extractor Oil Fluid Diesel Scavenge Suction Vacuum with Siphon Hose and Cigarette Light 60W

  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Please use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
  • Note: If you want to connect the pump to AC power, you need to have a power converter..
Check Stock

Mophorn 40W 50L Electrostatic Powder Coating Machine with Spraying Gun Paint 550g WX-101 Powder Coating System (40W 50L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, electrostatic through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction....
Check Stock

Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder’s rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work’s various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction he....
Check Stock

Mophorn 50W 45L Electrostatic Powder Coating Machine with Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System (50W 45L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless st....
Check Stock

SaverSystems Brick & Mortar Cleaner-2.5 Gallon

  • Heavy Duty Cleaner: Formulated to be used on industrial sites, commercial equipment, construction machinery, fleet vehicles and more.
  • Non-butyl degreaser quickly cuts through tough oil and grease.
  • Eliminates the need to use several other products to get the cleaning job done.
  • Versatile Cleaner: Can be used in equipment such as pressure washers, automatic scrubbers, and steam cleaners.
  • or use it for manual applications by spraying, mopping and wiping.
  • Highly Concentrated: Use directly from the bottle or effective at dilutions as great as half-ounce per gallon of water.
  • providing up to 256 gallons of cleaning solution per bottle.
  • Safe to Use: Use with pressure washers, directly on surface or with soap injection. Always consult your machine’s owner’s manual for specific instructions regarding use of detergent.
  • Can be sprayed, mopped, wiped, used in pressure washers, steam cleaners, and automatic scrubbers..
Check Stock

Zep 45 Sidewinder Super Penetrating Oil Aerosol - 14 Ounces (Case of 12) B41801 - Great for Frozen and Corroded Parts

  • SUPERIOR PENETRANT: Loosens frozen and corroded parts quickly while also providing a thin layer of lubrication and corrosion protection.
  • FAST-SPREAD: Contains no ozone depleters or chlorinated solvents, increasing compliance with regulations.
  • DISSOLVES GREASE: To help reduce clean-up time on equipment and helps saves time and money because of its versatility.
  • 360-DEGREE VALVE: Allows for upright and upside down spraying and includes an extension tube for hard to reach places.
  • Degreasing Properties: Dissolves grease to help reduce clean-up time on equipment.
Check Stock

Blysk Extra Strength Spray Gun Cleaner (D633) Spray Gun Cleaner For Paint Spray Guns, Nozzles, Air Hoses and Fittings, Works on Waterborne and Solvent-based Paints,

  • PAINT SPRAY GUN CLEANER – Features a powerful cleaning formula in an easy-to-use aerosol can that blasts paint from hard to reach areas.
  • LESS CLEANUP – Easy spray application reduces cleanup time for spray gun bodies, atomizing heads, hoses and fittings.
  • USE LESS SOLVENTS – Tight spray pattern helps reduce the use of cleaning solvents for removing paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats and sprayable adhesives from paint spray equipment.
  • VERSATILE – Removes waterborne and solvent-based coatings from metal spray equipment ideal for use on automotive and general industrial spraying equipment.
Check Stock

CRC 05074 Heavy Duty Silicone Lubricant - 7.5 Wt Oz.

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools and electrical equipment..
  • WATER BASED SILICONE LUBRICANT: This heavy-duty silicone lubricant is non-flammable and NSF H1 registered for incidental food contact. Eliminates sticking and binding and is safe to use on most surfaces..
  • PERMA LOCK: The CRC Perma-Lock 2-Way integrated actuator features a dual-purpose design that gives you both broad spray and precision spraying options through the convenient locked-in-place straw..
  • APPLICATIONS: This water-based lubricant is ideal for use in food processing and handling equipment, chutes, guides, rails, conveyors, bottling machinery, ovens, freezers, linkages, locks, pulleys, timers, rubber seals, tools, and ceramic insulators..
  • PRODUCT SPECIFICATIONS: Available in a 13 wt. oz. aerosol can..
Check Stock

3M Accuspray ONE Replacement Spray Gun, 16579

  • Replacement Accuspray spray gun body saves equipment costs.
  • Durable, lightweight 1piece composite spray gun body contains no gaskets, seals or Orings, eliminating maintenance kits.
  • Easilyoperated controls allow for up to 12 Inch vertical or horizontal spray pattern.
  • Works with replaceable atomizing heads for a full range of fluids, from primers to clear coat.
  • Works with PPS system for allinone mixing, filtering, spraying and temporary fluid protection, saving costs (up to 70% on solvent usage alone).
Check Stock