Top Split Phase Motors Reviews

Siemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage

  • 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
  • PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
  • REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
  • VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
  • IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock

MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

  • Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
  • Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check Stock

Single Phase to 3 Phase Converter My-PS-7.5 Model Suitable for 5HP 3.7Kw 15 Amp 200-240V 3 Phase Motor DPS Must Be Used for One Motor Only Input/Output 200V-240V Digital Type

  • Drive 3 phase motor(220V) with 1 phase (Rated Voltage:3 phase 220V ± 10%).
  • The failure rate was even lower frequency operation.
  • Excellent start-up torque / The size is small & easy to install.
Check Stock

CBB60 Motor Capacitor,AC 250V 120uF 50/60Hz,1pc

  • Metallized polypropylene film roller structure improves performance of the product and makes it durable..
  • Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
  • Heat resisting, low leakage, low loss and low impedance..
  • Current with good impact resistance, strong overload ability..
  • Suitable for the start-up of single-phase motors with frequency of 50Hz and 60Hz, such as air conditioners, compressors and motors..
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Room Air Conditioner Replacement Parts TitanPro TOCF7.5 HVAC Motor Run Oval Capacitor. 7.5 MFD/UF 440/370 Volts

  • Product Name:Air Conditioner Starting capacitor.
  • This operating capacitor is suitable for start-up of single-phase motors with frequencies of 50 Hz and 60 Hz, such as air conditioners, compressors and motors..
  • Package Content: 1 Pcs x 30uF CBB65 Capacitor.
Check Stock

POWERTEC 71443 Single-Phase Magnetic Switch Box 220/240V 3 HP 18-26 Amp Heavy Duty CSA Certified Multi Color

  • INCLUDES: 1-Phase Power Switch Box (magnetic starter) with wiring diagrams and printed instructions.
  • FUNCTION: Commonly used with textile machinery, drilling, table saws and other mechanical equipment, this electrical switch box directly controls your....
  • RATING: Single Phase, 220-240 volt, 18-26 amps, rated for 3 horsepower motors, CSA Certified.
  • COMPATIBILITY: Magnetic starter mounts directly to the equipment and works with popular brands such as the Delta Unisaw, Grizzly Shaper, and many....
  • EASY TO USE: Features color coded ON/OFF push button control.
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock

Usmile GX140 140mm Drone Frame Designed for Rumcam Split Mini 2 Caddx Turtle V2 1080P HD FPV Camera Micro 3 inch Quadcopter Frame Carbon Fiber FPV Racing Drone Frame (GX140)

  • ★Durable: This 3 inch drone frame is made of high-quality 3K Carbon Fiber, 4mm bottom plate,2mm upper plate designed to sustain multiple crashes and abuses.
  • ★Creative: Twin Tower design allows it accommodate two flight towers, one in the front and another in the rear end of the frame, 25mm aluminum standoffs provide plenty of space to comfortably put all the components inside..
  • ★Powerful: Perfect combination with 13** 14** 15** 16** brushless motors with 12*12mm mounting holes including 1306 1407 1507 1608 motors, please note it doesn't support 11** series motors. Make no mistake, it can pump out huge energy In a split second..
  • ★Specially designed for Rumcam split mini 2 Caddx Turtle V2 1080P HD FPV camera , capturing great FPV footage with no props in the view.
  • Package Includes: GX140 frame *1, camera mount, four motor protectors, and 3-in-1 holder for antenna and power cord.
Check Stock

CBB65A-1 Motor Capacitor,Cylindrical Shaped Run Capacitor AC 450V 30uF 50 / 60HZ for Motor Pump Air Conditioner Motors Refrigerator

  • Metallized polypropylene film non-inductive roller structure improves performance of the product and makes it durable..
  • Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
  • Heat resisting, small size, large capacity, low loss and good stability of capacitance..
  • Current with good impact resistance, strong overload ability..
  • Suitable for the start-up and operation of single-phase motors with frequency of 50HZ and 60Hz, such as air conditioners, compressors and motors..
Check Stock