Top Spiral Reamer Reviews

Bridge (Construction) Reamer 1-3/16\ Extra Long Magnetic

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking.
  • These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Construction reamer is especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Check Stock

Accusize Industrial Tools 4 Pc H.S.S. Standard Spiral Flute Super Premium Car Reamer Set, 3/8', 1/2', 5/8', 3/4', to Fit 3/8'' or 1/2'' Shank Chuck, 0522-1800

  • Straight Shank with 3-Equal-Flats to Fit 3/8'' or 1/2" Chuck.
  • Include size: 3/8" (fit 3/8'' shank chuck), 1/2", 5/8", 3/4" (fit 1/2'' shank chuck).
  • Straight shank with stop collar to prevent the reamer running through the hole.
Check Stock

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in uncoated (bright) and black oxide finish.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.
Check Stock

Sabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar

  • 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
  • FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
  • SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
  • JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
  • DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check Stock

Zak Designs 0204-9035 Citrus Melamine, 3.5" by 3.5", Kiwi Reamer

  • GREAT EVERYDAY KITCHEN ITEM：This Zak Designs citrus reamer is great for everyday use in the kitchen..
  • SAFE MATERIAL：This citrus reamer is made of 100% melamine material that is durable and long-lasting. It is BPA-free as well as dishwasher safe.
  • SAVE PREP TIME: The fruit reamer juices fruits quickly and efficiently, with a comfortably rounded handle and a sharp point to easily remove seeds..
  • DIY TOOL：This citrus reamer is great for lemons, limes, and other fruits when the store-bought juice just doesn’t cut it..
  • FUNCTIONAL SIZE：This citrus fruit reamer has a functional size that puts a fresh twist on making your own lemon juice! Dimensions (LxWxH): 3. 5in x 3. 5in x 7. 25in..
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

Taper Shank Milling Cutting Tool, Machine Reamer Precise Grinding Grooves 6 Blades Cemented Carbide for Stainless Steel

  • Universal Shank Type: This is reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: This integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Wide Application: This is reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

The Pampered Chef Juicer 2305

  • Quickly juice small or medium citrus fruit.
  • Bottom has rubberized nonskid ring to reduce slippage.
  • Plug and seeds are retained on the reamer allowing accurate measurement of juice up to 8 ounces.
  • Reamer can be positioned to either strain or simply pour juice.
Check Stock

Magisso Bulb Citrus Reamer #70308 Stainless Steel with Bamboo Stand

  • ENDLESS JUICING OPTIONS: It’s known that fresh juices are both healthier and tastier than their sugar loaded, from concentrate counterparts. Start making your own delicious juices or adding your own citrus zest to recipes conveniently with the Magisso Citrus Reamer. Citrus will have never tasted so good..
  • DOUBLE ENDED SHAPE: The double ended design of this Citrus Reamer is perfect for juicing any size of citrus fruits and ergonomically designed for any size hands. Make your own fresh orange juice or add some lime juice to a margarita. Both ends are guaranteed to ream your fruits quickly and with ease..
  • SLEEK ELEGANT DISPLAY: This Citrus Reamer is designed to be attractive as well as functional. When not in use, it sits stylishly in the bamboo stand on your counter. You can store it in a cabinet or drawer as well, but it’s sure to be too useful and striking to be hidden away..
  • FABULOUS FINNISH DESIGN: All Magisso products are made with desire to solve problems and create beautiful designs. We work with a team of talented designers who understand and value Finnish forms and functions. Each product is meticulously planned to add convenience and style to your home and life..
  • PRODUCT SPECIFICATIONS: Package contains (1) Magisso Stainless Steel Citrus Ream....
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock