Top Spiral Point Bottoming Tap Reviews

Union Butterfield 1985(UNF) High-Speed Steel Spiral Point Tap, High-Hook, Black Oxide Finish, Round Shank with Square End, Plug Chamfer, 4-48 Thread Size

  • Spiral point tap pushes chips ahead of tool to reduce clogging.
  • Spiral point tap with straight flutes for cutting threads in through holes.
  • Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup.
  • Relieved-style design with high hook, special outside diameter and pitch diameter relief, and increased back taper for free cutting action.
  • Some sizes are recessed between body and shank for deep-hole applications.
Check Stock

Thread Forming Tap Bttm 1/4-20 Uncoated

  • Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
  • Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Union Butterfield 1785NR High-Speed Steel Spiral Point Tap, Non-Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M2.3-0.40 Thread Size

  • Spiral point tap pushes chips ahead of tool to reduce clogging.
  • Spiral point with straight flutes for cutting threads in through holes.
  • Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment.
  • Produces ANSI standard right-hand threads in metric sizes.
  • Plug chamfer for easier starting and correct perpendicular alignment.
Check Stock

Drill America - DWTG5/16-18LH 5/16\-18 High Speed Steel Left Hand Spiral Point 2 Flute Tap, DWT Series

  • Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
  • They are recommended for use in through or blind holes.
  • Allow for chip accumulation in the bottom of the hole.
  • Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.
Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

  • No Center Punch or Pilot Hole required for drill bit.
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

  • High hardness, fast cutting, wear high temperature..
  • Spiral groove is conducive to remove crumbs, not easily broken tap..
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of.
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

Thread Forming Tap, Mbot, Co, TiN, 6-32, H6

  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads.
  • Cobalt steel provides extended tool life compared to high-speed steel taps.
Check Stock

Machine Tap 5 PCS HSS Spiral Point Titanium Coated Tap Machine Screw Thread Metric Tap Set M3-M8 M3x 0.5 tap M4 x 0.7 tap M5 x 0.8 tap M6 x 1.0 tap M8 x 1.25 tap

  • ✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
  • ✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
  • ✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
  • ✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
  • ✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..
Check Stock

WIDIA GTD GT275016 Victory GT27 HP Tap, Full Bottom Chamfer, Right Hand Cut, 6 Flutes, Forming, 7/16-20, HSS-E-PM, TiCN Coating

  • Advanced forming geometries designed for superior tap performance steel and stainless steel.
  • Manufactured with fine-grain micro grain carbide for exceptional wear life.
  • Ideal for long production runs where fewer tool changes mean greater productivity.
  • Runs up to 4x faster and lasts up to 4x longer than conventional high-speed steel taps, Excellent thread quality and tap performance.
  • Form E Bottoming Entry Taper, DIN Length ANSI Shank.
Check Stock