Top Spindle Drilling Reviews

EWANYO 3-Speed Benchtop Drill Press, Electric Bench Wood Drilling Machine for DIY Creation, Small and Precise Work Like Jewelry Making Woodworking Metal Drilling Machine 110V

【High Quality Mini Bench Drill】Fast speed, low noise, long life of the drill bit without swinging, extremely low drill bit breakage rate, high efficiency, high drilling quality, easy operation, and good stability..
【3 SPEED ADJUSTABLE】 With speed regulation function, speed regulation is convenient (I: 0-8000r/min.
III: 0-16000r/min) enables you to operate at a precise speed suitable for your project, which is more convenient and accurate than hand-held drilling rigs..
【Drilling Parameters】Drilling diameter is 1-10mm, the spindle is about 155mm away from the drill bit center, max spindle travel is 25mm. Non-load speed is 3 level, the first is 0-8000r/Min, second is 0-11000r/Min and the last is 0-16000r/Min..
【Powerful Motor】High-power 340W miniature portable bench drill precision drilling machine motor copper. Adopting imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing. Suitable for drilling, expanding, and reaming operations on metals and other materials..
【Various Material Applicable】Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.Can also be used for DIY furniture, work easily, drilling hole....

Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..

Check Stock

CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine

【BASIC INFORMATION】-This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm....
【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than....
【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD..
【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....

Check Stock

Shop Fox M1018 Combo Lathe/Mill

14 Spindle speeds at 117, 150, 220, 276, 290, 345, 360, 440, 450, 575, 640, 836, 1000, 1300 RPM.

Check Stock

42mm Er11 CNC Spindle Transmission Shaft with Holder, High Accuracy Engraving Milling Grind Tool

The spindle has high accuracy ground tapered holes for easy operation..
With ER11 fixture, stable and not easy to loose.
The front end of the spindle can be shaken slightly, which makes it easy to retract the tool when drilling.
High quality material can make sure the durability and stability of the product.
Widely used in engraving machine drilling.

Check Stock

SHOP FOX M1036 Micro Milling Machine, Small

Item may ship in more than one box and may arrive separately.
Motor: 0.2 HP, 2A, 110 Volt, single-phase.
Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.

Check Stock

PROXXON Bench Drill Press TBM 115, 38128 , Green

Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.

Check Stock

Ridgid ZRR7122 9.0 Amp 1/2 in. Spade Handle Mud Mixing Drill (Renewed)

9 Amp motor provides maximum performance for drilling holes or mixing.
5/8 in. spindle for increased strength in high-torque applications.
Rotating rear spade D-handle that rotates in a variety of orientations for added convenience.
3-position auxiliary handle for added versatility.
Forward and reverse direction options via a switch for drilling and backing out jammed bits.

Check Stock

Hi Speed Drill Press with Motor Noise and Bit Squeaking in Wood

Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations.
8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right.
Laser target your drilling operation marked with an X-pattern display.
Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly.

Check Stock

Stark Stationary Floor Drill Press Variable 16 Speed Stand | 220 to 3600 RPM | 11-Inch Swing Adjustable Height with Base

Beleving Work Table - Level the 11-Inch diameter table 45-degree in either direction for angled drilling operation.
Depth Adjustment Gauge - Set the depth adjustment lever to limit your spindle travel for accurate & repeatable drilling operations.
Drill directly through the center of a circle measuring up to 11-Inches in diameter and 3-Inches in thickness.
Build-In Precision Guild - The specifies the exact spot that the bit will travel through for maximum precision during drilling.
Heavy Duty Base - Sturdy base prevent walking and wobbling during operation with bolt holes to mount the drill press to a bench top of your choice.
16 Speed Operation - Drill Press with adjustable speed of 16 various stop ranging from 220 to 3600 RPM.
Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts..

Check Stock

Janjunsi Brazed Drill Bits, Diamond Hole Saw Angle Grinder M14 Thread Hollow Hole Opener Tools Drilling for Stone/Marble/Granite/Concrete/Brick Walls/Tiles, 6mm

Used for Angle Grinders: Suitable for angle grinders with M14 threaded spindle. Diameter ranging from 6mm to 100mm, the size will meet most of your different needs..
Application: Suitable for drilling hole on ceramic tile, marble, granite, quartz, concrete, brick walls, vitrified brick, limestone, stone etc..
Material: The high-quality diamond coating makes the hole saw sharper and more durable, providing fast and smooth drilling results..
Chip Removal Design: The side hole chip flute is larger, which helps to easily remove waste material, work more efficiently, and at the same time dissipate heat when cutting materials..
Note: Water is required during the drilling process to keep the drill bit cool, which extends the life of the drill bit and strictly prohibit from dry drilling..

Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
#2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
including bowls, spindles, pens, other small turning projects, and much more.
Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.

Check Stock

TECHTONGDA Inch Thread Metal Lathe 7X12\ Precision Bench Lathe 600W Brushless Motor Turning Machine

[Professional Lathe]: Techtongda lathe is used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model processing. With extensive use, simple operation and extensive processing..
[600W Brushless Motor]: The newly upgraded 600W brushless motor not only gives more power but also saves you the trouble of replacing the brush..
[All Metal]: All the gears are made of metal and the spindle is supported by precision taper roller bearing. High quality materials make its service life longer..
[Safety First]: The lathe is equipped with emergency stop switch and overload protection device, which can better protect the operator in emergency..
[Infinitely Variable Speed]: This lathe allows both forward and reverse, with the spindle speed can be adjusted in the range of 50-2500rpm which give you the convenience to process the workpiece at will..

Check Stock