Top Specification Of Tube Reviews

Kimax 45315-50 Borosilicate Glass 50mL Unmatched APHA Nessler Color Comparison Tube (Case of 6)

  • Nessler tubes are standardized glass tubes used to fill with standard solution colors for visual color comparison with similar tubes containing solution samples.
  • Shadowless bottom transmits undistorted light.
  • no dark spots form when tube is filled with liquid and viewed from the top using a light source beaneath the tube.
  • Tall and narrow tube provides a much longer scale length.
  • Rings and legend are durable white ceramic enamel.
  • rings coincide with specific volumes of liquid.
  • Designed from Federal specification NNN-T-175, Type 1, Class 2 requirements.
Check Stock

Kimax 45315-50100 Borosilicate Glass 50mL - 100mL Unmatched APHA Nessler Color Comparison Tube (Case of 6)

  • Nessler tubes are standardized glass tubes used to fill with standard solution colors for visual color comparison with similar tubes containing solution samples.
  • Shadowless bottom transmits undistorted light.
  • no dark spots form when tube is filled with liquid and viewed from the top using a light source beaneath the tube.
  • Tall and narrow tube provides a much longer scale length.
  • Rings and legend are durable white ceramic enamel.
  • rings coincide with specific volumes of liquid.
  • Designed from Federal specification NNN-T-175, Type 1, Class 2 requirements.
Check Stock

Criditpid Grill Replacement Parts for Brinkman 810-3660-S 810-3661-F Models Grill Heat Plate Shields Pipe Burner Tubes and Crossover Tubes for Brinkman 810-3660-S.

  • ★ Grill Replacement Parts for Brinkmann 810-3660-S, 810-3661-F Models. ➤ The Brinkmann 810-3660-S grill replacement parts includes 5pcs heat....
  • 【The Brinkmann 810-3660-S Heat Plate Specification】★ 4PCS Heat Plates: 15 3/8" x 3 15/16".
  • 【The Brinkmann 810-3660-S Burner Specification】★ Pipe Burner Tube: 15 5/16" x 1".
  • The Brinkmann 810-3660-S 810-3661-F Grill Replacement Parts made with premium quality steel material that is built to last. No more rusty heat shields....
  • 【Superior Repair Parts for Grill】- Over time, parts on your brinkmann 810-3660-S grill will wear out and rust. Made your grill like new again with....
Check Stock

BQSHOP 1-1/8\ Heavy Duty Headset Top Cap Bearings, 34mm / 44mm Diameter Threadless Stem Tapered Sealed BMX Bearing Nuts for Mountain MTB Bike (44MM)

  • Material: Forged machined steel cups and oversized 1/4 inch bearings in the lower cup, this headset will not let you downk..
  • Fit frame under the inner diameter of the head tube is 44mm (common in aluminum mountain bike frame, but also some road bike frame), match 28.6mm straight tube fork, or 1.5 standard taper pipe fork..
  • Specification: 44 MM (applicable to 44 MM frame head tube + 28.6 MM fork head tube).
  • Durable, smooth, light-weight, long-lasting headset, representing the perfect balance of performance. Suitable for MTB, road bike, convenient and durable..
  • If not satisfied with the bike headset, please apply for unconditional return and refund within 180 days..
Check Stock

Hapleby 2PCS Premium Bike Tubes Compatible with 26 Inch x 1.75/1.95/2.10/2.125 Bike Tire Mountain Bike Inner Tube with Schrader Valve 2PCS Levers

  • 1. PRODUCT SPECIFICATION: The tube is suitable for most mountain bikes and is the most widely used size Currently on the market, compatible with 26....
  • 2. REINFORCED VALVE DESIGN: We made a statistics. Among the cases of tube leaks and tears, 70% occurred at the interface between the valve stem and....
  • 3. THICKER BUTYL RUBBER: The conventional tube sidewall thickness is 0.75~0.98MM, but our sidewall thickness is 1.12MM, which is thicker than the....
  • 4. MORE DURABLE: Every tire produced has undergone strict quality inspection and is durable. For example, if a person weighs 190 pounds and the tires....
  • 5. PACKAGE INCLUDING: Each gift box contains 2PCS valve cap, 2PCS tire levers and 2PCS tube, the 2PCS tire levers that came with can save a lot of....
Check Stock

Ximoon 18’’ Frozen Water Line Tool Fridge Water Line Repair Kit

  • Material:POM(Polyoxymethylene) . Food-grade material, BPA free,NSF、TUV、SGS certificated etc..
  • Specification:1/4" inch To 1/4" inch OD Tube quick connector.Standard fitting for about 6.4mm water filter systems tube..
  • Installation:Non-Locking Clip design offers an easy DIY installation without any tools .Push fit fittings ,100% leak free..
  • Application:Apply to reverse osmosis water filter system,beverage dispensing system,refrigerator,ice maker,coffee machine,etc..
Check Stock

DERPIPE Silicone Tubing – 1/2”ID 3/4” OD Food Grade Flexible Thick for Homebrewing Pump Transfer 3 Meters(10ft) Length

  • Material: silicone rubber (tasteless and food grade).
  • Silicone tube size: inside diameter: 1/2 inch.
  • Silicone tube specification: temperature range: -40-460 degrees fahrenheit.
  • Silicone hose features: high temperature resistance, corrosion resistance and aging resistance.
  • it will not be hard in low temperature or soft in high temperature, resistance to common acid and alkali.
  • Application of silicone hose: water distiller.
  • home brewery, wine made (or transferring any hot liquids.
  • non - food machine water, drainage, filtration and other pipe connection.
  • domestic drainage, the requirement is not high for water connection,etc.
Check Stock

CANPA Dip Station Adjustable Parallel Bars For Home,Dip Stand With Two Safety Connectors And 6 Height Level,Multi-Function Dip Machine With 500 LBS Loading Capacity

  • 【Specification】( 45.7"- 52.6" ) H x 34.6" L x 26"W.
  • Weight Capacity: 500lbs. Material:Heavy duty steel. Package Include:dip station parts,screw package and 1Instruction.Assemble in 8mins..
  • 【Multi-function】dip machine can be used for a variety of exercise that benefit strength training dip stands,such as dips, pull ups, push ups, knee raise ect..
  • 【ADJUSTABLE HEIGHT and WIDTH】The dip station height can be adjusted within 45.7"-52.6"inch,you can adjust it to suit your needs,perform various types of exercise,and improve health and fitness..
  • 【Sturdy & Stable】The base of parallel bars is square tube. Our square tube has a wider contact area with the ground compared to the round tube,which makes it more stable than the round tube base.
  • we have installed diagonal support bars between the main frame and the base to avoid shaking and enhance stability and firmness..
  • 【CUSTOMER SERVICE】We provide lifetime service for the dip machine exercise equipment, If you have any questions or concerns with your order, you can contact us through Amazon freely,We will help you..
Check Stock

Farbetter 1-1/8 Heavy Duty Headset Top Cap Bearings 34mm/ 44mm Diameter Threadless Stem Tapered Sealed BMX Bearing Nuts 44mm

  • Specification: 44mm (applicable to 44mm frame head tube + 28.6mm fork head tube).
  • 1-1/8" Threadless headset Completed with star nut and bolt..
  • Durable, smooth, lightweight and durable headset, is suitable for MTB, Road Bike..
  • Material: high-quality steel forged, strong and durable, save money and worry..
Check Stock

MTB Bicycle Suspension Fork 24 26 27.5 29 Inch 3K Carbon Bike Fork Straight Tube 1-1/8\ Disc Brake 700g

  • Name: Mountain bike 3K carbon fiber front fork,Disc brake, fork open file 100mm/3.9 inch, Weight: 710 - 810g ± 10g..
  • Material: T800 high modulus carbon fiber material and Aluminum alloy straight tube..
  • Specification: Ultra-lightweight Full Carbon. Weave: 3K. Finishing: Gloss. Standard: EN Standard..
  • The standpipe : 230mm length straight tube design, pipe diameter 1-1/8" (28. 6mm) disc brake, 9mm quick release..
  • For :24"/26"/27.5"/29 inch Mountain Bike wheel ..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

ULAB Scientific Test Tube with Tube Rack Z Shape Stainless Steel Tube Rack Suitable for Tubes of Dia.≤16mm 10pcs of 16ml Cylindrical Glass Test Tubes with Flange stoppers UTR1002

  • Tube rack: round holes, alphanumeric positions for easy identification. Stainless steel, resistant to corrosion and autoclavable at 121℃..
  • Test tubes: made of Borosilicate glass, suitable for all usual laboratory applications..
  • Can withstand temperature change up to and including boiling of samples, as well highly chemically resistant..
  • Ideal for working with laboratory flasks and tubes..
  • Meets ASTM E982 Specification, Type Ⅳ requirements (Standard specification for Laboratory Glass..
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock