Top Special Shape Glass Grinding Reviews

Acrylic Paint Set Non Toxic - 12ml (0.4 fl oz) 12 Colors Tubes Pigment Paints for Artist Hobby Painters Adults Kids, Ideal for Canvas Wood Clay Fabric Ceramic Crafts

  • The flat-bottomed glass muller is an indispensable tool for homemade natural mineral pigment oil paints, tempera paints and thangka paints. It is suitable for artists and painting enthusiasts who have strong individual requirements for pigment performance..
  • The grinding surface is frosted, suitable for use with tempered glass grinding plates or palettes. It is convenient to collect the ground paint or use it directly, and it is easier to clean up after work..
  • There are two muller in the grinding pestle set. You can use the large grinding pestle first, and then the small grinding pestle according to the grinding progress..
  • Before each use, put an appropriate amount of natural mineral pigment in the center of the grinding plate, dig a small hole in the middle of the pigment pile with a palette knife, and then add an appropriate amount of cold-pressed linseed oil or other media———— Be careful not to add too much at one time to avoid the paint is too thin. After initial mixing with a palette knife, use a grinding pestle to grind in a circle or "8" shape until you reach the personalized pigment you need..
  • Note: Glass products are fragile and should be stored properly to avoid children's contact. The grinding pestle is only used for studio grinding, do....
Check Stock

Toolrm Grinding Wheel T1 7in 48A46-HVP2

  • Wear resistance,heat resistance,corrosion resistance and easy combination,Small with and practicality..
  • Widely used in precision polishing technology and burring,such as polishing stone, glass, ceramics,gem stones,metals etc..
  • The Pink ceramic Head - sanding chamfering, suitable for rough grinding.
  • Suitable for machinery, bearings, molds, casting internal bores, welds, solder joint grinding, and deburring..
  • The Sesame Grinding Bit - be made of special rubber and abrasive blending, especially ideal for medium grinding of metal such as aluminum and copper.
  • The Rubber Grinding Heads - quickly polish hardware accessories, jade and other materials.
  • is equivalent to the grinding effect of 2000 mesh sandpaper.
Check Stock

Missin / Cocaine / Firin Blanks

  • kit contains:1 hand grinder, 1 special glass bottle，1 aluminum alloy bottle with spoon,1 glass bottle with spoon, 1 funnel.
  • It is suitable for grinding coarse powder into fine powder, but not suitable for large block or hard things.
  • Diameter: 2.2 inches, height: 4.5 inches, 4 layers.
  • Handle crank, ultra-fine grinding, middle screen filtering fine powder.The funnel part can be screwed directly into the bottle for storing spices.
  • Exquisite packaging, suitable for outdoor carrying or gift giving.
Check Stock

12Pcs 8mm Head Cylindrical Diamond Coated Mounted Wheel Points Grinding Rotary Bit grit 46# with 3mm Shank for Rotary Tool

  • Use on wood, jade, ceramic, glass, hardened steel,Grinding.
  • mainly Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials..
  • Package include : 12x Diamond Mounted Point.
Check Stock

JINGLING 2.35mm Diamond Grinding Head Tapered Bits Carving Burrs Pack of 30Pcs

  • Product Name: Diamond Carving Burrs, Conical Grinding Bit, Cone Grinding Bit.
  • Diamond grinding head is ideal tools for grinding mold, hard alloy, glass apparatus, jade carvings.
  • Suitable for electric grinder, carving machine, machinery supporting assembly with a 3/32" collet.
Check Stock

Durable and wear-resistant Grinding Head Wheel Outer Diameter Grinding Wheel，10PCS Wool Felt Ceramic Grinding Head Pointed Polishing Sesame Sponge Rubber abrasive Wheel 3mm Shaft Mounted for Rotary To

  • Wear resistance,heat resistance,corrosion resistance and easy combination,Small with and practicality..
  • Widely used in precision polishing technology and burring,such as polishing stone, glass, ceramics,gem stones,metals etc..
  • Tool handle diameter: 1/4 inch (6 mm). Head shape: spherical, conical, cylindrical, 60-degree conical..
  • High working efficiency: precision grinding, quick and simple grinding, good grinding effect..
  • Suitable for grinding, polishing, engraving and polishing of various molds, glass, precision equipment and metals..
Check Stock

ILOVETOOL Diamond Coated 40mm CYLINDER Cylindrical Mounted Point Grinding Wheel 150 Grit

  • Quantity:1 Piece；Color:Silver Tone；Tip Shape: Cylindrical；Material: Metal, Diamond；.
  • Total Length:51mm (Close to 2")；Head Diameter:40mm ( Close to 1-9/16")；Head Length:11.5mm ( Close to 7/16")；Shank Diameter:6mm (Close to 1/4”)；.
  • Apply to stone carving, jade carving, bone carving, egg decorating, glass carving etc..
  • Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials..
Check Stock

Glass Muller for Making Paint(1.9in),Mineral Pigment Grinding Pestle, Suitable for Oil Painting, Watercolor,Tempera, Thangka

  • ...e natural mineral pigment oil paints, watercolor paint,tempera paints and thangka paints. It is suitable for artists and painting enthusiasts who have strong individual requirements for pigment performance.
  • The size of the muller is moderate(1.9x1.9x4.3in,5oz.), and the hand feels comfortable, making work easier.The grinding surface is frosted, suitable for use with tempered glass grinding plates or palettes. It is convenient to collect the ground paint or use it directly, and it is easier to clean up after work.
  • The main function of the muller is to fully mix the pigment with the medium, and to keep the paint in its proper state, so that the medium will not precipitate after sufficient grinding. Do not use pigment with too coarse particles, otherwise the muller may not achieve the effect you want.
  • Before each use, put an appropriate amount of natural mineral pigment in the center of the grinding plate, dig a small hole in the middle of the pigment pile with a palette knife, and then add an appropriate amount of cold-pressed linseed oil or other media——Be careful not to add too much at one time to avoid the paint is too thin. After initial mixing with a palette knife, use the muller to grind in a circle or "8" shape until you reach the personalized ....
Check Stock

JET JAT-752, 1/2\ x 24\ Pneumatic Belt Sander (505752)

  • ★ 【Material】:Made of high quality stainless steel. It has strong rust resistance, corrosion resistance and pressure resistance, exquisite appearance and long service life..
  • ★ 【Application】: It can be used for metal products, steel, copper aluminum materials, plastics, stainless steel mirror processing, leather fabrics, fiber glass, synthetic materials, rubber, glass, wood, stone and welding point burr grinding, cutting and polishing. It has a good effect on removing weld bead at corner edge.
  • ★ 【Advantage】: High stability, low vibration rate, low energy consumption, compact shape, legerity and portable.The handle is ergonomically designed, comfortable to hold and not easy to slide when using.Metal trigger switch design, no fatigue for long time use.
  • knurled handle, non-slip and non-slip, safer to use..
  • Grinding method: front and rear grinding..
  • ★ 【Package Include】: one 1/4 inch air belt sander and 12Pcs Air Belt Sander Belts(3/8"x13") ( #40，#60，80#，120#,3 for each).
Check Stock

Preamer 100x32x20x10x5 Cup Diamond Grinding Wheel Dressing Tool for Alloy Blade Tungsten

  • Easy and convenient to use, long service life.Mainly used for cemented carbide, tungsten steel, high speed steel, alloy steel, glass, ceramics surface grinding and external grinding..
  • GREAT REMOVAL RATES - Resin bond for grinding operation not only with high efficiency precision material removal rates, but also maintaining a low thermal influence on the work-piece,good roughness, less abrasive consumption..
  • Designed to grind carbide and hard steel, stone, metal and other processing and polishing, mainly used in alloys knives, saw blades, serrated grinding process..
  • Shape : Bowl ShapeMounting Hole Dia. : 20mm / 51/64".
  • Rim Dimension : 10 x 5mm / 0.39" x 0.2" (W*T)Overall Depth : 35mm / 1.4".
Check Stock

Luo ke 20 Pieces Compressed Wool Polishing Wheels Wool Felt Grinding Bits Buffing Tips with 1/8\ Mandrel for Dremel Rotary Tool(Sanding Diameter : 4mm / 6mm / 8mm / 10mm / 12 mm)

  • ★【MATERIALS】Made of high-quality wool(buffing head) and metal (mandrel). 3mm(1/8'') shank fits most rotary tool for buffing, polishing, grinding..
  • ★【PRODUCT DETAILS】This set includes cylinder shape and bullet shape, each shape has 5 size: 4mm/6mm/8mm/10mm/12mm. various sizes and shapes meet you different neet..
  • ★【APPLICATIONS】For polishing jewelry, gemstones, glass, watches, crystal, car, motorcycle, bike, feed ramps or trigger jobs etc..
  • ★【EFFECTIVE】Used for buffing, grinding and polishing to make the polished goods cleaner and brighter. Perfect for metal, jade, various molds, glass, medical equipment, gold and silver jewelry, non-metallic surfaces, etc..
  • ★【PACKAGE INCLUDES】20 pieces wool felt polishing bits for rotary tool..
Check Stock

3 Inch 150 Grit Flat Diamond Grinding Wheel Cutter Grinder Power Tool with 1/2' Bore for Grinding Hard Alloy, Glass, Tiles and Ceramics 78x12.7x10mm

  • Diameter x Bore Diameter x Thickness: 78mm/Approx.3" x12.7mm/Approx.1/2" x 10mm.
  • The diamond sand is evenly attached and wear-resistant, and it is not easy to drop sand.Good shape retention, strong grinding capacity, precision machining and high grinding efficiency..
  • Mainly used for grinding hard alloy, tungsten steel milling cutters, also can be used for glass, tiles, gems, ceramics, molds and other materials edge grinding and chamfer. And mainly applicable to small side grinding machine, grinder..
Check Stock

Gryphon Studio Stained Glass Grinder

  • ►Convenient and Portable:110V Power Stained Grinder Professional Industrial Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding va....
Check Stock