Top Spacer Gasket Reviews

Gimiton 46561 Carburetor for Champion Power Equipment 196cc OHV Engine 3000 3500 4000 Watt Gas Powered Portable Generator

  • Fit for Champion Power Equipment(CPE) 196cc OHV Engine 3000/3500/4000 Watt Gas Powered Portable Generator.
  • Fit for 46558 46561 46594 46596 46533 46534 46535 46539 46540 46551 46553 46554 46555 40026 40008 40012 46514 46515 46516 46517 45633 Gasoline....
  • Fit for DuroMax PowerMax 196CC/200CC 6.5HP/7HP Gasoline Generator XP3500 XP4400 XP4400-CA XP4400E XP4400E-CA MX4500 MX4500E Gasoline Generator.
  • Package Include: 1*Carburetor, 1*Spark PLug ,3*Gasket, 1*Fuel Filter, 2*Fuel Line Clamp, 1*Fuel Line, 1*Gasket Spacer, 1*Intake Manifold.
Check Stock

Mr. Gasket Fan Spacer Kit 2\ Gm/Ford, Silver

  • Designed for use with Mr. Gasket flex fans.
  • Allows adjustment of fan-to-radiator clearance.
Check Stock

30 Pack Wall Plate Insulation Gasket,Outlet Insulation Switch Plate Insulation Replacement Gasket Replacement Made with Weatherproof One Gang Double Gang Triple Gang Switches,2.5 x 4.2 Inch (White)

  • Abundant Quantity: You will receive a total of 30 power socket spacers, abundant enough for your home's daily use and spares. The size of each insulating spacer is 107*64mm (4.2*2.5inch), the size is general size, you can also freely cut it according to your own needs..
  • 3IN1 Size: Wall Plate Insulation Gasket adopts a 3-in-1 design of one switch, two switches, and three switches. You can freely combine and cut according to the needs of your home switch, saving time and effort, saving time and cost..
  • Insulation Material: The wall panel insulation gasket is made of EVA foam material, which is safe in material, light in weight, small in size, has specific windproof and insulation effects, can fit your home switch very well, has good sealing and can be well protected You and your family can use electricity safely and prevent accidents effectively..
  • Easy to Use: The insulation gasket of the wall outlet is designed in the right size, which is very convenient to use. You only need to confirm the type of switch, select the appropriate gasket and cut it out, stick the gasket firmly on your switch, and then tighten the switch cover. That's it. It is very simple and safe to use..
  • Widely Applicable: The package contains 30 pieces of wallboard insulating spacers, wit....
Check Stock

Boao 4 Pcs Microphone Shock Mount Rubber Spacer Tube Microphone Sleeve Washer Compatible with Sony Camcorder Rode NTG Shotgun Microphone Fx3 Mic Shock Mount Microphone Sleeve

  • Nice Fixing Effect: this shotgun microphone rubber spacer has a good fixing effect, which can increase the friction between the camera and the microphone, and will not shake or fall during the recording process, improving the recording quality.
  • Quality Material: this microphone shock absorbing pad is made of quality rubber material, which is soft and elastic, sturdy and not easy to break, lightweight and can well fix the interface no matter how large it is.
  • Easy to Use: put this rubber shock mount on the microphone handle that needs to be fixed, and fix it on the camera together with the handle, gasket and microphone.
  • If it is still not fixed firmly, you can use two rubber gaskets at one time.
  • Multiple Compatible Models: the single size of the microphone shock mount rubber spacer is approx. 45 x 20 mm/ 1.8 x 0.8 inches, which is suitable for most types of shotgun microphones.
  • If you are still troubled by the situation that the recording process has to be interrupted because the microphone is not fixed firmly, then this shock pad is for you.
  • Wide Range of Uses: these microphone spacer rubber tubes are compatible with many cameras, and suitable for both outdoor and indoor environments, for anchors, vloggers, interviewers, voiceovers, field recordings, podc....
Check Stock

212CC Carburetor Carb for Harbor Freight Predator 60363 68120 68121 69727 69730 Engine R210 Gas Engine for 6.5 HP 212cc Go Kart OHV Engine

  • 212CC Carburetor Fit for Harbor Freight Predator 212CC 6.5HP Gas Engine.
  • 212CC Carburetor Compatible with Honda GX140 GX160 GX200 GX168 168F 5HP 5.5HP 6.5HP 163cc 196cc 200cc Engine.
  • Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 Generator.
  • Honda WP20X WP30X WMP20X WMP20X1 WT20XK2 WT20XK3 WT20XK4 water pump.
  • Honda HS522 HS55 HS521 HS55K1 HS55K2 Snow Blower.
  • 212cc Carburetor replace Honda # 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825.
  • Center mounting hole: 42mm, core hole: 19mm, choke hole: 24mm.
  • Package Includes: 1 x Carburetor, 1 x Spark PLug ,3 x Gasket, 1 x Fuel Line, 1 x Gasket Spacer.
Check Stock

Swiss Madison Well Made Forever SM-1T254 St. Tropez One Piece Toilet, 26.6 x 15 x 31 inches, Glossy White & Fluidmaster 7530P8 Universal Better Than Wax Toilet Seal

  • Product 1: Modern design, clean, sleek look and compliment with different styles.
  • Product 1: Fully skirted trapway - extremely easy to clean.
  • Product 1: Sleek and eye appealing modern design.
  • Product 2: WAX-FREE TOILET SEAL: Toilet seal gasket offers wax-free solution to installing a toilet on any flange without the mess.
  • Product 2: UNIVERSAL GASKET: Stackable seal and slide-on spacer fits any 3-inch or 4-inch drain lines with no-rust brass bolts & hardware.
  • Product 2: SECURE SEAL: Seals on uneven floors or over tile floors with recessed flanges.
  • Product 2: EASY INSTALLATION: Requires no minimum temperature for installation and can be repositioned without damaging seal.
Check Stock

Sundown Audio SA-15 Classic D2 15 750 Watts Dual 2-Ohm SA Series Subwoofer

  • Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement: 0.17ft^3.
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz).
  • 19.0mm X‐Max by 70% BL method one‐way (38.0mm peak to peak) | Thick black anodized aluminum voice coil formers for maximum strength and heat....
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....
Check Stock

ICT Billet SBC Small Block Chevy 1\ Billet Valve Cover Spacer Aluminum 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-1

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

ICT Billet SBC Small Block Chevy 3/8\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-3

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

ICT Billet SBC Small Block Chevy 3/4\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-7

  • Used to raise valve covers .75 inch for valvetrain clearance.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

Hood Spacer Riser,Aluminum Alloy Engine Hood Ventilation Spacer Riser Kit for 6mm Turbo Motor（Blue）

  • The high quality gasket lifter kit is made of 6061 aviation grade hard anodized aluminum. Rugged surface, clean and bright appearance, no rust, no fading..
  • In screws with nuts, the function of the spacer is to increase the contact area, reduce the pressure and protect the parts and screws..
  • The spacers provide better cooling and airflow effect for all your motor or turbo applications. Stable and reliable performance..
  • Add a positive look to your engine compartment and add a touch of ultimate touch to your car..
Check Stock

GlowShift 2-1/4'-2-1/2' Clamp-On Wideband Air/Fuel Ratio Gauge Oxygen Sensor Bung Adapter - No Weld Design

  • GlowShift Clamp-On Wideband Air/Fuel Oxygen Sensor Bung Bracket Adapter Allows Users to Easily Install a Sensor to the Exhaust Pipe with a No Weld Design - DIY Friendly.
  • Adjustable Bracket from 2-1/4" to 2-1/2" - Installs to Vehicle's Exhaust Pipe.
  • 304 Stainless Steel Bracket with (2) Bolts, (2) Nuts, (2) Crush Washers, (2) Flanges, (1) Removable Spacer & Exhaust Gasket to Prevent Leaks.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

ICT Billet BBC Big Block 3/4\ Valve Cover Spacer Riser Tall 396 454 Compatible with Chevy Big Block Engines to Raise Valve Cover for Rocker Arms 551640-7

  • These will require a gasket and/or sealer on both sides of the spacer.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Used to raise valve covers for valve train clearance.
  • Includes: 2 spacers, and mounting hardware.
Check Stock