Top Sordin Arc Rail Adapter Reviews

Universal Low Profile ARC Rail Headset Adapters

  • Low profile, lightweight headset adapters.
  • Slide on and lock to any standard ARC rail, including Crye Airframe rails (no adapters needed).
  • Can also be installed on MLOK rails (MTEK Flux, HHV helmets, etc.).
  • Fits Howard Leight, Walker Razor, and Caldwell headsets and earmuffs with no adapters needed. Also available with tips to fit Peltor Comtac or MSA Sordin headsets.
Check Stock

DLP Tactical Helmet ARC Rail Adaptor Set for MSA Sordin Headsets (Foliage Green)

  • Attach your MSA Sordin or similar communications headsets directly to your Tactical Helmet ARC accessory rails. (Will also fit most other MSA hearing protection earmuffs with similar headband mounting posts).
  • Drastically improves the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • Rotating design allows headset to swing up and out of the way when not in use.
  • Installs in seconds on any mil-standard ARC rail and replaces existing headband, no permanent modification to headset or helmet required.
Check Stock

Hearangel ARC Rail Adapter Accessories for Comta ii Comta iii Tactical Headsets

  • Rail adapter for arc rail, from headband verion to helmet mounting version, offer user-friendly experience.
  • With a full 360-degree rotative design, save space while no using.
  • Compatibel with comta ii comta iii airsoft headsets, easy to install, more comfortable using experience.
  • Rails of adapter can match with ARC RAIL ,many range of Ops-Core FAST helmets, ACH helmet, MICH helmet,etc,which has arc rail on side..
  • The ARC track has been installed beneath the side of the helmet, making it easier to modify the position of the tactical headsets..
Check Stock

Universal Communication Headset Adapters for ARC Rail Equipped Helmets (MSA Sordin)

  • Low profile, lightweight headset adapters.
  • Slide on and lock to OPS-Core Helmet ARC Rails.
  • Fits Howard Leight, Walker Razor, and Caldwell headsets and earmuffs with no adapters needed - Also available with tips to fit Peltor Comtac or MSA Sordin headsets (spade ends of headset adapters will need to be trimmed for use with Sordin tips).
  • Can be locked open for easy donning and doffing - Can be rotated to rear for storage.
  • Made by Armorwerx (a division of The Mercenary Company).
Check Stock

OPSMEN Tactical Earmor M32H Electronic Headphones for FAST Helmets (Black)

  • The Perfect Choice: Whether in the military service, you enjoy hunting, airsoft or the occasional shooting range training, the EARMOR arch rail mount is a must for ensuring a comfortable and safe experience..
  • To mount your EARMOR headset on your helmet!.
  • Easy Mounting: Unlike similar products on the market, this arc rail adapter is easy to mount and requires no special skills or tools. SImply lift up adapters with "PA" voice, slide into the arc rail from front or back, then slide it on the upper part of the rail for a better fit on muffs to ear. Easily adjust tension with a Phillips head screwdriver..
  • Rotative Design: This tactical headset helmet mount provides a comfortable and user-friendly experience, featuring a full 360˚ rotative design. An excellent choice for external communications and stereo "talk-thru", this adapter improves safety standards..
Check Stock

TAC-SKY ARC Rail Adapter Helmet Headset Left & Right Side Attachments for Comta Headphones (tan)

  • Suitable for pelto C1 ,C2, C3, etc headsets,hang your headsets on helmet instead of headband and release your head,makes regular wear of the pelters so much more comfortable,no sense of restraint any more..
  • Rail Adapter can be used on full range of FAST helmets, ACH helmets, MICH helmets,etc who have ARC rails on side..
  • Before hanging on headset, lift up adapters with “pa” voice, secendly sliding into the arc rail from front or back, and then slide it on the upper part of the rail for a better fit on muffs to ear.You can adjust tension with a Phillips screwdriver..
  • Lastly you can remove the muffs and place them out of the way of your ears when you don’t need hearing protection. Arc rail adapter doesn’t seem like their going to snap so far and they fit well and makes it way more comfortable then wearing the earmuffs with head band inside the helmet..
  • Making the part with the plastic hoop goes up and the little plastic notch goes down to adjust length.The most length is 6.6inch which would meet people requirement..
Check Stock

HEARFALCOM Tactical Helmet ARC Rail Adapter Compatible with Howard Leight Impact Sport ‎R - 01526 Shooting Earmuffs (GRAY)

  • Compatible with Howard Leight Impact Sport Tactical Electronic Shooting Earmuffs (compatible with model number R - 01526) This product is also available in other colors ASIN B09ZV45KFZ.
  • The rail adapter is compatible with the full range of helmets and other helmets with ARC rails on the side..
  • This ARC helmet rail adapter can be rotated 360°, flapping up or down. The card position of the bracket on the headset can also be rotated. The length of the stand can also be adjusted. Mounting the stand on the headset is simple and easy to use..
  • Rail mount arms attach to the sides of the helmet's ARC rails to free up front space for a spot on the top of the helmet for accessories like tactical flashlights and cameras..
  • Use this product to mount a tactical headset on a helmet. When not in use, the headset swivels to the back of the helmet, simplifying storage and creating a very low profile look..
Check Stock

Hdlsina Helmet-Type Tactical Headset + with U94 PTT 2pin with ARC Rail Adapter Compatible Ops-Core FAST helmet ACH helmet MICH helmet for Airsoft Hunting Shooting (Khaki)

  • What goods will you get? 1* Tactical Headset,2*Multifunction ARC Rail Adapterwith install fittings ,1*U94 type headset PTT.
  • What are the functions of this series of tactical headphones? This Version Only has Communication Function, this headset don’t uses electronic active noise reduction and sound pickup technology,No need to install battery, battery Slot and Buttons is For Decoration.
  • Humanized Design,Conversion of two application modes,The ACR rail adapter is compatible with the full range tactical FAST helmets, ACH helmets, MICH helmets with OPS Core ARC rail on the sides，The design of the Head hoop , It can also be worn alone on the head.
  • Very valuable combination:Equipped with The Multifunction ARC rail adapter,With a full 360-degree rotative design, the ear cups can be rotated to fold to the side or back of thetactical helmet. With U94 type headset PTT,Fit standard version plug Adapter Mobile 2 Pin 7.0mm Plug , fits for Kenwood 2 pin radio.theTactical headset has the NATO standard 7MM plug, It should work work perfectly..
  • Detachable microphone Free to Install,Fit Right or Left Side,very convenient.Deep Ear Cup Provide Clear Voice and Comfortable Support. soft ear cushions for all-day comfort..
  • Application Scenarios:Ideal for tactical games, a....
Check Stock

HEARFALCOM Tactical Helmet ARC Rail Adapter Accessories Compatible with Walker's Razor Earmuffs (Walkers Razor,Walkers Razor Digital) (DE)

  • Rails of adapter can match with full range of Ops-Core FAST helmets, ACH helmet, MICH helmet,and other helmets with ARC rails on the sidesetc..
  • Compatible with Walker's Razor Earmuffs (Walkers Razor ,Walkers Razor Digital) Tactical Electronic Shooting Earmuffs.
  • This ARC helmet rail adapter can be rotated 360°, flapping up or down. The card position of the bracket on the headset can also be rotated. The length of the stand can also be adjusted. Mounting the stand on the headset is simple and easy to use..
  • Rail mount arms attach to the sides of the helmet's ARC rails to free up front space for a spot on the top of the helmet for accessories like tactical flashlights and cameras..
  • Use this product to mount a tactical headset on a helmet. When not in use, the headset swivels to the back of the helmet, simplifying storage and creating a very low profile look..
Check Stock

DLP Tactical MSA Sordin Headset adaptor for M-Lok compatible helmet ARC Rail (Tan)

  • Attach your MSA Sordin or similar communications headsets directly to your M-LOK compatible helmet accessory rail such as MTEK Flux and Team Wendy EXFIL helmets (Will also fit most other MSA / Sordin hearing protection earmuffs with similar headband mounting posts).
  • Drastically improves the comfort and protection of your helmet by eliminating the rigid metal headband, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • Rotating design allows headset to swing up and out of the way when not in use and facilitates rapid donning or doffing.
  • Installs in seconds on M-LOK compatible helmet accessory rails (Not HHV Helmet) and replaces existing headband, no permanent modification to headset or helmet required.
Check Stock

OPSMEN Earmor Airsoft Tactical M32 Headset Noise Canceling Headphones Aviation Communication Softair Earphones Shooting (BK)

  • This headset is a civilian version compatible with the full range of civilian version tactical PTT adapters (compatible with civilian version TAC-SKY/Z Tactical/Z-TAC's PTT). Not compatible with military-defined versions of PTT (not compatible with PELTOR PTT).
  • We equipped the headset with a K-plug PTT adapter. compatible K jack walkie-talkies. (Compatible with Baofeng UV-5R, UV5RB, UV5RC, UV-82 and other K jack walkie-talkies).
  • This stand version of the headset helmet adapter is an ARC track.The bracket mounts under the side of the helmet's ARC track. The helmet holder can be adjusted in size, can be rotated 360°, and can be moved up and down.The rail adapter of the bracket is the ARC core helmet track,It is suitable for FAST series helmets, ACH series helmets, MICH helmets ..
  • The headset adopts electronic active noise reduction and sound acquisition technology, and the volume of the headset can be adjusted. Headphones provide radio communication/hearing protection/sound amplification/can pick up surrounding sounds..
  • The ear pads of the earphones are silicone ear pads, which have higher elasticity and sealing, providing more comfort and sound isolation. The headphone plug is a standard 7.0mm plug.Detachable microphones can be interchanged left and righ....
Check Stock

1Pair Headset Helmet Adapter ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Support Left & Right Side Attachments For Peltor Comtac (Black)

  • ... they have arc rails on side. Attach your communications headsets directly to your Tactical Helmet ARC accessory rails.You no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • ★ [Fit For]By testing, Comtac I and Comtac II headset can be combined perfectly with this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • ★ [Convenient]With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain..
  • ★[Rotating Design] Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use. Improves the comfort and protection of your helmet..
  • ★ [Easy Installation] Require some assembly, mainly removing the ear muffs from the head band and then snapping them to the adapters..
Check Stock

baotongle 1Pair 3.9''x 1.8'' Tactical Helmet Headset Support ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Left and Right Side Attachments For Peltor Comtac (Tan)

  • ...headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain. It can attach your communications headsets directly to your Tactical Helmet ARC accessory rails..
  • Suitable for most helmet: By testing, Comtac I and Comtac II headset can be adapted perfectly for this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • Special Design:Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use..
  • Easy assembly: mainly removing the ear muffs from the head band and then snapping them to the adapters. Improveing the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
Check Stock