Top Solvent Pvc Reviews

SCIGRIP 16 10315 Acrylic Cement Low-VOC Medium bodied 5 Ounce Tube Clear 5- Pack

  • Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

Sealproof 1.5

  • . Successfully tested for toxicity by an independent laboratory for use in Aquaculture.Above and below ground installations.
  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers.
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

Gardner Gibson 7760-3-16 Dynamite Vinyl Over Vinyl Wallcovering Adhesive, 1 qt

  • Formulated for PVC and CPVC pipe and fittings.
  • Removes surface dirt, grease and grime for preparation before solvent cementing.
  • Less aggressive than clear and purple primer only products.
  • Purple tint ensures piping has been primed prior to solvent cement application.
  • For use in areas where plumbing code calls for verification that a primer has been used.
Check Stock

LIJMSTIFT PRITT 43GR - Various

  • The adhesive pen is ideal for paper crafts, card, fabric, felt or photo with smooth, consistent Auftrag/bonded to correct time to.
  • The adhesive is without polyvinyl chloride (PVC) and without solvent and easy ready to fill with at 20???C wash out/approximately 90% of the adhesive based on natural materials?-?A reliable kleben for children.
  • The adhesive is easy to use due to solid adhesive and clean slide/thanks to provides an air tight seal durable/pads of casing made from 89% Pflanzenbasiertem plastic.
  • Box contents: glue stick Pritt Original "Large (1?x 43g)/Stick Glue solvent-free/glue water-soluble.
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock

WELD-ON 12121 PB-1 Brush for Solvent Cement, Fits Pint and Quart Cans, 1 inch, Pack of 25

  • Precisely apply solvent cement when welding PVC, CPVC, and ABS pipes.
  • Designed to fit pint and quart solvent cement cans.
  • Sturdy bristles allow for precise placement and thorough coverage.
  • Extended plastic handle gives you a firm handhold during extended welding applications.
Check Stock

Stone Pro, Traverfill Pro Adhesive

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Specially formulated for wet and/or quick-set applications.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Rectorseal 55929 1/4 Pint Cl-3L Low-Voc Pvc, Cpvc, Abs Cleaner

  • CL-3L is a clear cleaner for use on all PVC, CPVC and ABS pipe, tubing, and socket-type fittings.
  • Acts as a cleaner by dissolving grease and dirt and helping prepare the bonding surfaces for solvent cementing.
  • Helps make a clean, professional looking joint.
Check Stock

Sealproof 1.5\ Dia Flexible PVC Pipe, Swimming Pool and Spa Hose, Pool Plumbing Schedule 40 Tubing, Made in USA, 1-1/2-Inch, 50 FT, White

  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers. Successfully tested for toxicity by an independent laboratory for use in Aquaculture..
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

  • FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
  • SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
  • UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
  • CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
  • PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..
Check Stock

Valterra 2101X PVC Gate Valve, White, 1-1/2\ Inner Diameter, 1.9\ Outer Diameter Unibody Valve, Slip w/ Gate Keeper

  • APPLICATIONS: Ideal for quick opening and shut off in vacuum or pressure applications - Can be used with air or clean water up to 75 PSI.
  • KEY FEATURES: Unrestricted flow - Full Port - Simple push pull operation - Twist lock closure & Gate Keeper to hold open - Solvent traps help keep solvent out of seal area.
  • SPECIFICATIONS: Working pressure of 75 PSI in both open and closed postions - Sch 40 PVC with female Slip/Hub fittings - All materials resist corrosion and mild chemicals.
  • REPAIRS: Non-repairable body - Handle is threaded for easy replacement.
Check Stock

4PCS 1-1/2Inch Elbow PVC Fittings, 5-Way Heavy Duty PVC Pipe Fitting, Furniture Grade PVC Fitting Connector Corner Fitting for Water Supplies Build PVC Furniture DIY Garden Shelf Greenhouse

  • ... is treated with anti-corrosion and anti aging process with strong sealing and good quality features for long service life..
  • 1-1/2INCH 5-WAY CROSS PVC ELBOW FITTING: 5-Way PVC fittings fit three segments of PVC pipe together. PVC pipe slides into each socket for a secure, square corner fit. Fasten in place using PVC solvent cement or with screws between the PVC pipe and fitting for a permanent joint..
  • PVC FURNITURE FITTING: 5-way cross side outlet elbows PVC furniture fitting are a popular part of non-plumbing applications.
  • Furniture grade PVC parts were crated when people realizing PVC is a great material for building things outside of the plumbing world. They are usually bright white and made to look great while still being strong and durable..
  • GLOSSY FINISHED WITH SLEEK LOOK: Furniture grade fitting connector means the surface without barcode or printing , glossy finished bring a sleek look.
  • PVC fitting has 5 socket ends that plus it fits standard SCH40/80 PVC pipe, great for PVC projects and crafts..
  • WIDE APPLICATION: 5-way cross PVC connector furniture grade fittings are available for build PVC furniture, water supply engineering, installation of small shelves, shoe racks, tents, connecting waterways, framing shelves, combination frames, flower stan....
Check Stock