Top Solid Stage Relay Reviews

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

• Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
• output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
• Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
• material : metal, plastic, electronic parts.

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

• Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
• output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
• Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
• material : metal, plastic, electronic parts.

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

• This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
• The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
• Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
• Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
• Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

• The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
• 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
• Equiped with high-current relay, AC250V 10A.
• DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
• You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..

SainSmart 5V 2A 4 Channel Solid State Relay Module High Level Trigger Black for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC

12V Fuse and Relay Box with 6 Slots ATC ATO Blade Fuses and 5pcs 5Pins JD1914 40A Relay and 1pcs 4Pin RTT7121 40A Relay, Fuse Relay Box Kit for Car Truck Trailer Boat

• Safe and Durable: The car relay fuse box shell is made of high-quality nylon material flame retardant shell, each slot has a precise cutout, and an arc socket is reserved on the edge, so that all your wiring is neat and beautiful, and the overall structure is of solid quality Reliable, excellent metal pin ① blade fuse 12PCS ② 2 big 2 small 4 pin relay ③ 25PCS 5 pin relay.
• Complete Parts: The unit is equipped with 42 terminals, including 30 relay copper terminals and 12 zinc-plated fuse terminals, all necessary connection pins are included, no missing parts.
• Easy to Install: This car relay fuse box can be completely installed, with the installation wiring harness, there is no need to install the terminal and wiring harness later, it can be used directly after connecting the wiring harness, very simple and easy to operate.

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

uxcell BEM-14840DA 3-32V DC to 24-480V AC 40A Output Single Phase SSR Solid State Relay

• Total Size (Approx.) : 58 x 45 x 32mm / 2.3" x 1.8" x 1.26" (L*W*T).

Scytek Astra777c Car Alarm Lcd Remote 2 Way Pager Keyless Entry Astra 777c

• Scytek Astra A15 Security System & Keyless Entry Easy plug and play upgrade through the system antenna port.
• Two 5 Button 1-Way Remote Control Built-In Parking Light Relay, Programmable (+/-) Built-In Smart Dual Zone Impact Sensor.
• 2 Way confirmation with your smartphone Capable Witth G3 MOBILE GPS It can also be used as Stand-alone tracking with Lock/Unlock and Starter Interrupt outputs. ( Not Included ).
• Plug-in user programmable Coded Override Switch and LED on the Antenna Lock, Unlock and Passenger Unlock Outputs (-) User Selectable Auto-Lock and Unlock with Ignition Interior Light Output (-) Horn out (-) Does Not Include Siren.
• Does Not Include Siren Output for Starter Interupt Relay (-) Two Programmable Auxiliary Channels, Pulsed, Timed and Latched (-) Auto Disarm with Auxiliary 1 (Trunk) Activation Programmable Programmable Three Stage Anti Car-Jack Feature Factory Alarm Upgrade Inputs (+) Data Bus Port.

Opto 22 DC60MP MP Model DC Control Solid State Relay, 60 VDC, 3 Amps, 4000 VRMS Isolation Voltage

• Special attention: the current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-40DA Solid State Relay 40A DC to AC.
• Input voltage: 3-32V DC Output voltage: 24-380V AC.
• Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

• ...ctural strength, impact resistance, strong shock resistance, small driving current at the input end can easily interface with computer terminals and various digital programmed circuits. Beautiful and generous, excellent electrical conductivity, safe and reliable, long mechanical life..
• PACKAGE INCUDIGN: Include 2pcs solid state relay module, F type male connector easy for install simply push on it to the intended female connector antenna connection..
• CONVENIENT TOOL: The shell of solid state relays is made of ABS flame retardant plastic material, waterproof, moisture proof, wear resistant, high temperature resistant, dustproof and oil resistant. The internal structure adopts a high-efficiency spring structure and has a high life. High mechanical strength, reliable and stable..
• HIGH QUALITY: Super wear-resistant, anti-oxidation and corrosion resistance, reliable operation and low power consumption Fast switching speed, no spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
• A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric furnace heating, stage lighting control, photocopiers, medical equipment, petrochemical equipment, food machinery, packaging m....

How to Use a Breadboard! (Make: Handbook)

• 30A High Current 12V Contactor relay Switch DC power Switching Control Board.
• Using high-quality ultra-small optocoupler, anti-interference ability, stable performance..
• Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality..

TWTADE 2PCS SSR-25 DA 25A 3-32V DC / 24-380V AC SSR Single Phase Solid State Relay ssr-25da

• Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25DA Solid State Relay 25A DC to AC.
• Input voltage: 3-32V DC Output voltage: 24-380V AC.
• Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).