Top Solid Conveying Machinery Reviews

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..

Check Stock

PZRT 2 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers

Bearing material: high temperature bearing steel, with wear resistance, heat resistance and durability..
Size: Aperture=19.05mm/3/4", Outer diameter=31.75mm/1-1/4"..
Feature: needle roller thrust bearings can accommodate axial loads in one direction only..
Function: These rollers are used to reduce friction of a rotating surface. It can serve as raceways in the faces of adjacent machine components..
Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.

Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

The needle roller thrust bearing can only bear axial load in one direction.
Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
The hardened chromium steel roller has heat resistance and durability under heavy load.
Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.

Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

Check Stock

10 Pack 6204-2RS Double Rubber Seal Bearing 20x47x14mm,Stable Performance,Cost Effective, Deep Groove Ball Bearings

【Wide Application】Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics,dental equipment, elevators, ship rudder shafts, skateboards, inline skates, scooters and , among others..
【6204-2RS Dimension】Inner Dia.=0.79 inch, Outer Dia.=1.85 inch, Thickness=0.55 inch.
【Material】The bearing is made of high quality bearing steel, good durability and resistance to heavy loads(Synthetic Grease Formula included Wear-Resistant Additives and High Temperature Grease can be rated to 410 F.
【Features】Pre-lubricated, normal accuracy, less friction, higher speed, smooth and low noise.
【Strictly Shielded】Shields on both sides of the bearing help to keep dust out.Premium Support & 12 Months Warranty.

Check Stock

1623-2RS Bearing 5/8 x 1 3/8 x 7/16 inch Sealed Ball Bearings

Material:High Carbon Chromium Bearing Steel.
【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.

Check Stock

10 Pack 6205-2RS Double Rubber Seal Bearing 25x52x15mm,Pre Lubricated,Stable Performance,Cost Effective, Deep Groove Ball Bearings

【Wide Application】Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics,dental equipment, elevators, ship rudder shafts, skateboards, inline skates, scooters and , among.
【6205-2RS Dimension】Inner Dia.=0.98inch, Outer Dia.=2.05inch, Thickness=0.59inch.
【Material】The bearing is made of high quality bearing steel, good durability and resistance to heavy loads(Synthetic Grease Formula included Wear-Resistant Additives and High Temperature Grease can be rated to 410 F).
【Features】Pre-lubricated, normal accuracy, less friction, higher speed, smooth and low noise.
【Strictly Shielded】Shields on both sides of the bearing help to keep dust out.Premium Support & 12 Months Warranty.

Check Stock

10 Pack 6202-2RS Double Rubber Seal Bearing 15x35x11mm,Pre Lubricated,Stable Performance,Cost Effective, Deep Groove Ball Bearings

【Wide Application】Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics,dental equipment, elevators, ship rudder shafts, skateboards, inline skates, scooters and , among others..
【6202-2RS Dimension】Inner Dia.=0.59 inch, Outer Dia.=1.38 inch, Thickness=0.43 inch.
【Material】The bearing is made of high quality bearing steel, good durability and resistance to heavy loads(Synthetic Grease Formula included Wear-Resistant Additives and High Temperature Grease can be rated to 410 F).
【Features】Pre-lubricated, normal accuracy, less friction, higher speed, smooth and low noise.
【Strictly Shielded】Shields on both sides of the bearing help to keep dust out.Premium Support & 12 Months Warranty.

Check Stock

Enduro CF112SB Cam Follower | Track Roller Bearing | Sealed Stud | Socket Headed Screw with Hex Hole

CAM FOLLOWER: A cam follower is a specialized type of roller designed to follow cam lobe profiles. Cam followers are all track roller types with needle rollers supporting high static and dynamic loads in cam- and track-type applications..
PREMIUM QUALITY: Our tools are designed ergonomically and are flexible to handle. Premium materials enhance the performance of these bearings providing stability and corrosion resistance..
DURABILITY: All tools are made from durable and corrosive metal. Enduro cam followers are sealed with an internal hex recess making them more durable than other competitors..
MULTIPLE USES: Cam Followers bearings have high rigidity and accuracy as follower bearings for the cam mechanism and straight-line movement, and they are used in a wide range of industries: material handling and conveying, industrial trucks, food processing, textiles, and general machinery..
SATISFACTION GUARANTEE: Customer satisfaction is our main priority. Our tools are made from the highest-quality material and we are confident enough that you will love this product. For any concern please feel free to reach us..

Check Stock

Othmro 10Pcs 6204-2RS Deep Groove Ball Bearings Double Rubber Sealed Bearings High Carbon Chromium Bearing Steel Roller Guide Bearing 0.79x1.85x0.55inch for Scooters Skateboards

【Size】-20x47x14mm(Inner DiaxOuter DiaxThickness).
【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.

Check Stock

Othmro 2Pcs 6202 2RS Deep-Groove Ball Bearings, Double Sealed Bearings, Gcr15 Deep Groove Ball Bearing 0.59x1.38x0.43inch for Scooters Elevators Skateboards Robot Ship Rudder Shafts

【Size】-15x35x11mm(Inner DiaxOuter DiaxThickness).
【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.

Check Stock

Othmro 2Pcs 6208 ZZ Deep Groove Ball Bearings Double Sealed Bearings High Carbon Chromium Bearing Steel Ball Bearings 1.57x3.15x0.71inch Deep Groove Bearings for Scooters Elevators Skateboards

Material:High Carbon Chromium Bearing Steel.
【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.

Check Stock