Top Solid Carbide Rods Reviews

Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051

The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting..
Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61".
Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch]. Resolution: 0.0001".
Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers..

Check Stock

40Pcs End Mill Bits Set 1/8\ Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance..
【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs..
【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches..
【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
【Parameter】Overall Length（OAL）: 38mm.

Check Stock

Brybelly Solid 5/8-Inch Steel Rods for Standard Foosball Tables (Set of 8)

8 solid steel foosball rods, enough to outfit a standard foosball table Set includes two 40.25" two-man rods, four 44.5" three-man rods, and 2 49.5" five-man rods.
Solid or Hollow? Solid rods are more durable and long-lasting, while hollow rods are easier to spin and push, but may warp over time.
Ideal for replacing worn or lower-quality rods as well as building custom tables.
5/8" diameter will fit a large number of foosball tables by popular manufacturers.

Check Stock

Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits

1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..

Check Stock

AccuSharp Compact Pull-Through 2-Stage Knife Sharpener - Diamond-Honed Tungsten Carbide Rust-Free Quickly Sharpens, Restores, Repairs & Hones Chef Knives, Orange/Green

2-STEP COMPACT KNIFE SHARPENER: Two step compact pull through knife sharpener sharpener features diamond-honed tungsten carbide sharpening blades (Step 1) with fine ceramic rods (Step 2)..
CARE AND MAINTAIN SHARPNESS OF YOUR BLADES: The Sharpener is an innovative tool that everyone can use. The ceramic rods (dark for coarse and white for fine) are exactly what you need to care for and maintain your blades..
DURABLE AND LONG LASTING: With our professional knife sharpener, you don’t have to be a chef to cook like a PRO! Crafted from solid ABS plastic, it’s strong, durable and designed to last a lifetime..
SOLUTION FOR SHARPENING AND HONING YOUR BLADES: This knife sharpener is the compact solution for sharpening and honing your blades. Whether you’re working in the woods, on a boat, or in the workshop, this is the tool you need to keep your blades in peak cutting form..
PERFECT FOR SHARPENING STRAIGHT STAINLESS BLADES: Perfect for sharpening straight stainless steel knives, ideal for survival knives, hunting knives, multi function knives, steak knives, filet knives and pocket kn....

Check Stock

Yonico 33209q Top Bearing Ultra-Performance Compression Flush Trim Router Bit 1/4-Inch Shank

This Top Bearing Ultra-Perfomance Compression Flush Trim Router Bit is constructed from solid carbide and has a 1-1/8" cutting length and a 1/2" diameter with an overall length of 2-3/4" and a 1/4" shank..
Flush trim endgrain of any direction for a perfect finish.
High performance C3 micro-grain solid carbide sleeve, polished to a mirror finish.
For use on table mount and handheld router.
Bit is contructed from a solid carbide sleeve welded to a hardened steel core.

Check Stock

Sika Anchorfix-2, Super Strength anchoring Adhesive, Two Component Anchor System for Threaded Bars in uncracked Concrete, 10.1 fl. Oz & Bosch HC2083 1\\/2 in. x 8 in. SDS-Plus Bulldog Rotary Hammer Bit

Product 1: Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
Product 1: SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
Product 1: USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
Product 1: PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
Product 2: Optimized brazing and hardening process for long life.
Product 2: 15 percent faster (compared to S4L).
Product 2: Bosch-made carbide tip is tougher and more durable under heavy loads.
Product 2: Proprietary Bosch hardening process results in more holes per bit.

Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..

Check Stock

Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral 1/2-Inch Up-Cut 1/2-Inch Shank 31200-SC

This heavy-duty solid carbide up-cut flush trim router bit features a 1-1/4" cutting length with double guide bearings secured with a lock nut. The overall length is 3-13/16" with a 1/2" diameter and 1/2" shank..
Flush trim all types of material for a perfect finish.
Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
For use on table mount and handheld router.
Polished to a mirror finish from a solid carbide rod for precision & accuracy.

Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..

Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..

Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..

Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..

Check Stock