Top Solid Carbide Inserts Reviews

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Wood Turning Tools Rougher Carbide Tipped Lathe Chisel Tool Bar 19.68 Inches With 14mm Straigt Edge Square Carbide Insert for Wood Hobbyist or DIY or Carpenter

  • ❶【8 Models Carbide Cutters Inserts Satisfy All Your Demands】: Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point. Supplied with Screws..
  • ❷【Sphere Of Application】: Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools..
  • ❸【Durable Tungsten Steel Material】: Made of solid tungsten steel - Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life..
  • ❹【Suitable For All Levels Of Carpentry Workers】: This is a free combination suit that meets the needs of roughing and finishing cutting. Suitable for both professional carpenters and beginners..
  • ❺ All the carbide turning inserts cutting tools are supplied with screws..
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set

  • Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
  • CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
  • Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
  • This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Lathe Boring Bar SNR0012M11+SER1212H11 Turning Tool Holder Lathe Internal Threading Inserts with Turning Inserts 5pcs 11ER AG60+5pcs 11IR AG60 Carbide

  • 【CNC Threading Inserts】: 16ER AG60 carbide inserts length: about 16 mm.
  • 5pcs/pack with a plastic box for convenient storage. Used for turning and finishing on a wide range of materials..
  • 【Advanced PVD Coating】: Made of solid carbide with high performance PVD coated, which has excellent wear resistance and smooth on face, so it can offer long tool life and faster cutting..
  • 【Accurate Threading】: Professional chip-breaker design, provides perfect cutting performance and high accuracy. Also Smooth rake face design makes the chip removal more fluency..
  • 【Widely Application】:Tungsten carbide threading inserts good for Low carbon steel, medium-carbon steel, high carbon steel, alloy steel , adjusting quality steel, stainless steel, cast steel, cast iron, aluminium alloy and copper alloy machining..
  • 【Satisfaction Guarantee】:TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

Accusize Industrial Tools 2.5'' by 0.75'' Bore, 75 Degree Indexable Face Mills with 4 Pcs Apkt1604 Carbide Inserts, 0028-2601

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

YUFUTOL 4pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square,Round and Diamond Shaped Cutters) Supplied with 4pcs Screws

  • This Combination Carbide Inserts Set match our 5pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits YUFUTOL 5pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 4 different carbide cutters satisfy all you demand:Square With Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL Woodturning Tool Set..
Check Stock