Top Solid Brass Lever Handle Reviews

Signature Hardware 948525 Ravenel 1.8 GPM Single Hole Bar Faucet

  • Sleek and stylish, the Ravenel single-hole bar faucet has a swiveling gooseneck and a modern design that catches the eye. Cylindrical detailing on the fixture's base and lever handle create a look that complements a contemporary space. Built to last, this fixture is made of solid brass and has a smooth, resilient finish..
  • Covered under Signature Hardware's limited lifetime warranty.
  • Deck mounted faucet installs directly to sink or countertop.
  • Single lever handle controls the flow and temperature of water.
  • This faucet meets or exceeds the following codes/standards SDWA Section 1417(d) WaterSense IAPMO/cUPC NSF 61 ASME A112.8.1 / CSA B125.1 ADA NSF/ANSI 372 and the California lead law titled Health and Safety Code Section 116875.
Check Stock

Dynasty Hardware AUG-00-26D Grade 2 Commercial Duty Office Door Keyed Lever Lockset ADA Satin Chrome Finish

  • This commercial door handle is an office function door lock. This commercial door lock can be locked from the inside by turning or pushing the inside button on the lever or by key from the outside. Inside Lever always free for immediate egress.
  • This commercial door lever handle entry lockset is ADA approved for barrier free access on all commercial and residential exterior doors. The exterior handle is removable for ease of rekeying. The 6 pin solid brass SC1 keyway is keyed to 5 pins. The 2-3/4-Inch backset latch meets the UL 3 Hour Fire Rating. This lockset is made to fit doors between 1-3/8-Inch and 1-3/4-Inch.
  • 2-3/4 Inch Backset Latch, Uses SC1 Keyway, UL Rated.
Check Stock

Signature Hardware 948522 Amberly 1.8 GPM Single Hole Bar Faucet

  • Give your wet bar or kitchen prep space a striking update with the Amberley single-hole faucet. From the embellished lever handle to the arching gooseneck, this fixture displays traditional elegance. Built to last, its solid brass construction and corrosion-resistant finish will hold up through frequent use..
  • Covered under Signature Hardware's limited lifetime warranty.
  • Deck mounted faucet installs directly to sink or countertop.
  • Single lever handle controls the flow and temperature of water.
  • Height: 13-1/16" (deck to top of faucet).
  • Spout Height: 8-7/16" (deck to spout outlet).
  • This faucet meets or exceeds the following codes/standards SDWA Section 1417(d) WaterSense IAPMO/cUPC NSF 61 ASME A112.8.1 / CSA B125.1 ADA NSF/ANSI 372 and the California lead law titled Health and Safety Code Section 116875.
Check Stock

Matte Black Shower System S3223DI + Wall Mount Tub Faucet S2149DI

  • 1. Shower System S3223DI + Wall Mount Tub Faucet S2149DI both with classical lever handles, matte black finish will resist corrosion and tarnishing through everyday use. If you have them in your bathroom, It's visually more comfortable and harmonious..
  • 2. Shower System S3223DI with rough-in valve, shower head, brass hand shower, shower arm, handle, escutcheon, drip-free operation ceramic disc cartridge..
  • 3. Wall Mount Tub Faucet S2149DI made of solid brass, 8.66GPM at 60PSI spout flow rate,11-11/32 inches extra long spout reach, 500,000 times cycle testing ceramic disc cartridge..
  • 4. S3223DI&S2149DI Valves and handles are constructed of solid brass for durability, designed for use with standard U.S plumbing connections..
  • 5. Solid brass construction and ceramic disc cartridge provides many years of supreme performance and resists to corrode and leak..
Check Stock

2 Pack Universal Side Mount Toilet Handle Angle-Mount Adjustable Trip Lever Tank Flush Lever Replacement Handle with 2 Pieces Stainless Steel Flapper Chains for Most Side Mount Toilets-Chrome Finish

  • 1.【Side Mount Brass Toilet Tank Lever】This toilet tank lever handle is compatible with most common toilets with a side mount or angle mount flush lever. Three holes at the end of the lever, which make it flexible to adjust the length according your toilet tank..
  • 2.【Size Details】The flush handle lever measures about 8 inch/20cm in length, and 2.56 inch/ 6.5cm in width. Proper size for most Side-mount and Angle-mount flush toilets. Fits tank hole diameter 0.62 in. to 0.67 in..
  • 3.【High-quality Brass Material and Corrosion Resistant Finish】Made of brass for enhanced durability. Replace your toilet handle with this universal flush lever. This lever comes in a classic chrome finish to compliment your toilet..
  • 4.【Easy to Install】It's easy to install and includes the chrome finish handle, aluminum arm, white plastic spud and nut. Passes 50,000 times flush test. Fits standard front mount..
  • 5.【Fit for Most Common but Not All Toilet Tank】Note that side-mount toilet handles type is fit for most toilet tank, but does not mean that will fit for any side-mount or angel-mount handle. When replacing a side-mount or angle mount handle, measure the lever before place the order..
Check Stock

sumerain Brushed Gold Shower Faucet Set with 8 Inches Stainless Steel Rain Shower Head, Solid Brass Rough In Valve

  • 1.Brushed gold shower faucet brass construction of faucet body and handle ensures reliability..
  • 2.A sleek sophistication for the bath providing both style and functionality..
  • 3.Brushed brass shower faucet with single function cartridge - Single lever handle for ease of temperature and flow control..
  • 4.Gold shower faucet set designed for use with standard U.S. plumbing connections. California CEC list (1.8GPM 6.8L/MIN).
  • 5.Solid brass rough-in valve included in this shower set. How to install sumerain S3221 brass shower faucet? Please watch the video..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through ....
Check Stock

Westbrass D2035-NL-26 9\ Victorian 1-Lever Handle Cold Water Dispenser Faucet, 1-Pack, Polished Chrome

  • Victorian single lever handle cold water dispenser faucet. 9 in. Overall height with 5 in. Gooseneck spout projection.
  • Can be installed with water filter (F400) and/or in-line chiller.
  • cannot be modified to use with hot water tank.
  • Single lever handle with 1/4-turn ceramic disc cartridge. 1/4 in. Compression tube inlet.
  • Faucet trim only. Do not use plumber's putty for installation use silicone seal.
Check Stock

Solid Brass Shower Head Shut Off Valve Water Flow Control with Brass Handle On Off Switch for Hand Shower Bidet Sprayer Shower Arm, Oil Rubbed Bronze

  • SOLID BRASS: premium brass construction and brass lever handle, ceramic disc cartridge internal. Full metal, no plastic, no leaking, sturdy and durable..
  • OIL RUBBED BRONZE FINISH: Rust-resistant, resists daily corrosion, scratches and tarnishing. The decorative venetian bronze matches your bronze hand held shower head, head shower and other black/ dark color bathroom fixtures..
  • SHUT OFF & FLOW CONTROL VALVE: 1, can be used as a shut-off valve: fully open the pause switch to stop the water flow completely, needn't to reset the cold/hot water mixture at the main tap again.
  • 2, also can be a shower flow control valve: slowly move the handle anywhere between fully open and close to restrict/ limit the flow, adjust the volume. Perfect for water saving..
  • 1/2” IPS CONNECTION: 1/2” IPS male and female threads, standard size. Universal fitting for connecting shower heads, shower arms, toilet bidet sprayers and hoses pipes..
  • EASY & SMOOTH OPERATION: Easy installation, no special tools required, plumbers’ teflon tape included. It is easy to operate the lever handle even with the soapy hand when taking a shower..
Check Stock

Wall Mounted Rainfall Shower System S3223NI + Brushed Nickel Wall Mount Tub Faucet S2149NI

  • 1. Wall Mounted Rainfall Shower System S3223NI + Brushed Nickel Wall Mount Tub Faucet S2149NI both with classical lever handles, brushed nickel finish will resist corrosion and tarnishing through everyday use. If you have them in your bathroom, It's visually more comfortable and harmonious..
  • 2. Wall Mounted Rainfall Shower System S3223NI with rough-in valve, shower head, brass hand shower, shower arm, handle, escutcheon, drip-free operation ceramic disc cartridge..
  • 3. Brushed Nickel Wall Mount Tub Faucet S2149NI made of solid brass, 8.66GPM at 60PSI spout flow rate,11-11/32 inches extra long spout reach, 500,000 times cycle testing ceramic disc cartridge..
  • 4. S3223NI&S2149NI Valves and handles are constructed of solid brass for durability, designed for use with standard U.S plumbing connections..
  • 5. Solid brass construction and ceramic disc cartridge provides many years of supreme performance and resists to corrode and leak..
Check Stock

Windspeed Side Mount Toilet Tank Flush Lever Handle for Toilets

  • Toilet tank flush lever with handle, our chrome plated and stylish platinum toilet flush handle replacement quickly upgrades your toilet..
  • Material: Brass, alloy and plastic, toilet flusher replacement kit, metal plating wrench with copper lever, not easy to rust, highly durable handle arm construction, strong and durable for long time use..
  • Brass Lever Length: Approx. 9 inch in length, and 3 inch in width. There are three holes in the copper lever which allow different position for installation..
  • Fit most side mounted tank, suitable for TOTO toilet tank, flush tank lever handle replacement is compatible for ST701/CST604CEF/CST614CEF/CST634CEF/CST644CEF/CST853/CST853E/CST853S/CST854/CST854E/CST854EL/CST854S/CST854SL/CST863/CST863E/CST864/CST864L/CST864E/CST874S/CST884/CW844/CW864/CW854RB/CW764BT400/SW764B/CW764BT305/CW744RB etc..
  • Perfect solution for your decorative bathroom, the toilet side flush handle to decorate your bathroom, make your life perfect and convenient. chrome toilet handle is great for kids, toddlers and elderly without having to apply too much pressure..
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ... Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an ess....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ... Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
Check Stock