Top Solenoid Oil Pump Reviews

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Gump's grocery Liquid Level Controller Module Water Level New Detection Sensor

  • Automatically open when you can stably pool (water tower) water pump (solenoid) pumping,automatically stops the pump (solenoid) when full of water..
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

Happybuy Hydraulic Pump 12V DC Hydraulic Power Unit Double Acting Double Solenoid Hydraulic Power Pack Unit with 8L Plastic Tank Max Pressure 200 Bar for Car Liftng

  • Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw), an 8-quart reservoir and a start solenoid. The max relief pressure is 3200 PSI.
  • and it is a double-acting pump for both power up and power down..
  • Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It comes with a 15 ft remote for long-distance control and 4 SAE#6 connectors..
  • Reliable Quality: The dump trailer pump is made of sturdy plastic.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with relief valves, it can avoid overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
  • Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydraulic systems..
Check Stock

Air Compressor Tire Inflator for Car Tires 12V DC Auto Tire Pump with Digital Pressure Gauge，with Emergency LED Light for Car, Bicycle and Other Inflatables

  • Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw), a 15-quart reservoir and a start solenoid. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • it is a double-acting pump for both power up and power down..
  • Easy to Use: This hydraulic power unit has been fully assembled. The wiring is simple with operating instructions. The hydraulic gauge gives clear value of the pressure and the 15ft remote allows you to control in a long distance. In addition, we offer you 2 additional SAE#6 connectors for replacement..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it can avoid overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
  • Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a ....
Check Stock

mistcooling 30'' OSC Misting Fan Kit - Mid Pressure (1 Fan)

  • Base Fan Mist Kit Includes: 1 - 30'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Mist Hub 1- 250PSI Mid Pressure Pump with Solenoid and Filtration 1- 25ft Roll of Flexible Tubing 1/4'' 6- Ultrafine Brass/Stainless Steel Misting Nozzles – Mounting Clamps and All necessary fittings for easy DIY installation..
  • - PUMP Features: - Whisper quiet operation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 5 Fans (With 6 Nozzles each) FAN Features: - UL 507 certified for outdoor use - High Velocity, 3 Speed, Oscillating Fan (Air throw up to 45 feet) - Corrosion resistant finish - 10ft pre-wired 3-prong plug for 120V AC - 7100 CFM, 1/4 HP, 2.6 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Patented 6 Nozzle Mist Hub.
Check Stock

SHZOND 220V 2.2KW Car Lift Hydraulic Power Unit 2.64 Gallon Steel Tank Hydraulic Pump 2950 PSI Adjustable Pump Pressure Auto Car Lift (car Lift Power Unit)

  • Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw), a 15-quart reservoir and a start solenoid. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • it is a double-acting pump for both power up and power down..
  • Easy to Use: This hydraulic power unit has been fully assembled. The wiring is simple with operating instructions. The hydraulic gauge gives clear value of the pressure and the 15ft remote allows you to control in a long distance. In addition, we offer you 2 additional SAE#6 connectors for replacement..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it can avoid overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
  • Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a ....
Check Stock

Misting Fan Kit - 18 Inch Outdoor Fan with 250 PSI Misting Pump - Stainless Steel Misting Fan Ring (3 White Color Fans)

  • 250 PSI Misting Pump features: 110v AC (Available in 12vdc and 220v on request).
  • Max Output capacity of 250 PSI Supports up to 40 nozzles Easy to hook with any Garden Hose or Faucet.
  • Built in 5 Micron Filtration Built in Inlet Solenoid and Thermal Safety Switch Outdoor compatible fan cooled enclosure with on/off switch.
  • Compatible with variety of timers and controls Powered by Totally Enclosed Pump head and Motor that is MADE IN USA.
Check Stock

TOPEND Dump Trailer Solenoid- Intermittent Duty Solenoid Relay- for Part Numbers SAZ4201GJ 7522 SAZ-4201ER 070009 190107 KTI Unit KTI 391-2-C (12 V 4 Terminal 100 Amp)

  • 【High Quality】Intermittent Duty Solenoid is made of tough plastic and durable copper, Coil Roll is using 180℃ copper wire, which allows it to be used in the harshest environmental conditions, protects against dust and water jets, dust& liquid resistant, anti-rust and corrosion. 100% OEM Match and Replacement..
  • 【OEM Parts Number】Solenoid Switch Replaces Part Number: Prestolite SAZ-4201GJ 7522 SAZ-4201ER Monarch/Bucher 07522 IRON BULL Dump Trailer Solenoid Also suitable for pj dump trailer with KTI system OEM Part# 190107.
  • 【Parameter】OEM Replacement Switch Solenoid Fits Prestolite, Monarch/Bucher, Continuous Amps 100, 12v, 4 Terminals, Intermittent, Surge Amps 200..
  • 【Application】This 4 terminal solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.It can also replace the solenoid valve of the hydraulic leveling jack on the motorhome. Also common on many other brand dump trailers..
  • 【replacement】 Dump trailer solenoid Genuine....
Check Stock

mistcooling 24'' OSC Misting Fan Kit - High Pressure (2 Fans White Color)

  • Base Fan Mist Kit Includes: 2 - 24'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 2- 25ft Roll of Flexible HP Tubing 1/4'' 12- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 10 Fans with 6 nozzles FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish –.
  • 10ft pre-wired 3-prong plug for 120VAC - 5600 CFM, 1/4HP, 2.4 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Stainless Steel 6 Nozzle Mist Ring (we also offer White and Grey Color Tubing) contact us if you wish to get a different color.
Check Stock

VEVOR Hydraulic Power Unit 12 Volt Dump Trailer Hydraulic Pump Double Acting 12 Quart Hydraulic Pump Electric Hydraulic Cylinder Pump with Brass Pressure Gauge for Dump Trailer Lift Gates & Trucker

  • Product Details: This hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw), a 12-quart reservoir and a start solenoid. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
  • it is a double-acting pump for both power up and power down..
  • Easy to Use: Our hydraulic power unit has been fully assembled. The wiring is simple with operating instructions. The hydraulic gauge gives clear value of the pressure and the 15ft remote allows you to control in a long distance. In addition, we provide you with one SAE#6 connector and a M18 connector. Please note: The connector on the unit is metric. If you need to use the SAE#6 connector, please replace it by yourself..
  • Reliable Quality: The dump trailer pump is made of sturdy metal.
  • thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it can avoid overpressure, safer and reliable..
  • Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
  • it can provide strong power for hydraulic....
Check Stock

SCITOO Canister Purge Solenoid Carbon Tank Solenoid Valve Compatible With 2008-2013 GMC Sierra 1500 4.8L 5.3L 6.0L 6.2L 2016-2017 Chevrolet LCF 3500 4500 6.0L

  • Applications- Compatible for 2008-2017 Chevrolet Express 3500 4.8L, 2011 Chevrolet Express 3500 6.6L , 2016-2017 Chevrolet LCF 3500 4500 6.0L , 2007-2014 Chevrolet Suburban 1500 5.3L ,2007-2009 Chevrolet Tahoe 4.8L , 2008-2013 GMC Sierra 1500 4.8L 5.3L 6.0L 6.2L, 2010-2018 GMC Sierra 2500 HD 6.0L.
  • Reference Number- 911082, 2142137, PV479, PV479. 1x Carbon Tank Canister Purge Solenoid.
  • Function – Canister Purge Solenoid absorbs the oil and gas volatilized from gasoline in the tank to prevent the oil and gas from entering the atmosphere to pollute the environment. The function of canister purge solenoid valve is that when the oil and gas in the tank reaches a certain amount, it opens and allows the oil and gas to enter the engine for combustion and reuse.
  • Benefit – Canister purge solenoid valve is made of high-quality industrial plastics, which can withstand low and high heat engine operating temperature. 400 degrees Fahrenheit and high heat resistance.
  • Attention- You can refer to the reference number or check the compatibility to make sure whether this item is suitable for your vehicle.
Check Stock