Top Solder Material Reviews

Sainwora 10 Pcs Soldering Accessories Kit Includes Desoldering Pump,Pocket Pack Solder and Repair Tools Solder Sucker Tool Kits

  • ★【High Quality】Super high pressure vacuum with aluminum body frame,can remove solder from a printed circuit board effectively.
  • ★【Excellent Function】Excellent thermal transfer for faster, safer desoldering using lower temperature irons.durable and not easy to age.
  • ★【Powerful Suction】Made of high temperature resistant nylon material.Heated up the solder pushed the button,all solder sucked up,super easy to....
  • ★【Low Residue】Solder sucker desoldering pump helps to clean the solder and avoid short circuit, Anti-scalding and high temperature resistant tin....
  • ★【Special Design】Right or Left handed design allows easy one-handed use.Easy to disassemble and clean, easy to disassemble by slight rotation,....
Check Stock

350 Pcs Solder Seal Wire Connectors Heat Shrink Butt Connectors Kit Marine Waterproof Wiring Electrical Cable Splice Terminals for Boat Automotive RV Trailer

  • Easy to Use: Heat shrink wire connectors can be connected with just a heat gun, no crimping tool or soldering machine is needed..
  • Waterproof and Insulating: Solder seal wire connectors with low heat solder and hot melt adhesive can produce a perfect seal, which helps to be better waterproof..
  • Wide Applications: Butt connectors are ideal for marine, automotive, trailer and other outdoor applications..
  • High Quality Solder Seal Rings: Use exclusive material in the wire connectors to avoid shrink tubing melting before solder..
  • Package Includes: You will receive 350 pcs waterproof solder wire connectors..
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • ...to meet your needs for daily use and replacement.
  • Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.
Check Stock

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock

Soldering Iron Tip Cleaner,LXIANGN Non-slip Solder Flux Brass Tip Cleaner & Base Holder Cleaner Kit for Cleaning Soldering Irons and Tips,No Water Needed

  • ✎✎Maintain The Tip's Temperature:Replace the traditional water-permeable sponge,the solder tip cleaner is no need to use water to keep the soldering tips clean, so that will not reduce the tip's temperature, improve your working efficiency..
  • ✎✎The Dome Top Design:The soldering iron tip cleaner looks like a ball, hardened solder collects in the bottom,prevents tin slag from splashing on the workbench, keeping the working environment clean..
  • ✎✎High Quality Brass Material:The soldering iron tip cleaner is made of high quality stainless steel, the copper wire ball is made of brass material.can reduce oxide accumulation effectively and prolong soldering iron tip service life..
  • ✎✎Easy to Use: Insert the tip of the soldering iron into the wire in the mouth cleaner to remove the residual solder from the tip.The solder cleaner has two parts. You can separate the two parts to clean tin residual easily..
  • ✎✎Tip of Use:You need to wear gloves when you replace the metal wire, keep the cleaner uprightly when open it, please don't take the metal wire out to sweep the tips, or this will possibly splash the melted residual solder..
Check Stock

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

  • ☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check Stock

Soldering Iron Tip Cleaner 4 Pack Non-slip Solder Cleaner with Case Holder No Water Needed Solder Tip Cleaner Soldering Iron Cleaner

  • Solder tip cleaner adopts premium copper material, effectively prevent iron tip oxidation, to prolong tip service life..
  • Our soldering tip cleaner will not reduce the tip temperature when using, to improve your working efficiency greatly..
  • The solder iron tip cleaner adopts ball shell design to prevent residual solder stained your working area..
  • No water needed when using solder cleaner, very convenient to use..
  • Package include 3 pack soldering iron cleaners with 1 holder case, Safe and no risk to use than conventional tip tinners..
Check Stock

CCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each

  • ☃[Package Include] You will get 2 pack No-Clean solder braided wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

FEITA Soldering Tips 900M-T-LI Solder Iron Tip 0.8mm Point Diameter (5-Piece)

  • High quality and long lasting use life of 900M solder iron tips, up to 40,000 solder joints can be used..
  • Soldering iron tips Fits for Hakko, Atten, Quick, Aoyue, Yihua, X-Tronic,Vastar,Sywon,Tabiger,SOAIY and other brand soldering iron station..
  • 5 Pieces 900M-T-LI solder iron bits' point Dia. : 0.8mm / 0.031".
  • color : silver Tone, solder tips long pointed tips can fit on many kinds DIY Electronic Repair..
  • Brand new and best Copper & Iron metal material,Lead -free of soldering tips replacement for electronic soldering & repair the different components of PCBs..
  • 100% No-Hassle, RISK FREE Money Back Guarantee! if you are not satisfied, we will give you a full refund or a replacement. Feita soldering iron tips have perfect stocking stuffer..
Check Stock

5/16-18 Center Hole Tab Weld Nuts/No Projections/Steel/Plain / 1,000 Pc. Carton

  • Application: Used for pipe furniture, tables and chairs, shelves and other threaded connection..
  • Advantages: Flat solder joints, high-quality steel ,good weldability, thread size accuracy..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
Check Stock

Valtcan Fume Extractor Soldering Fan Smoke Absorber

  • Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently..
  • Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place..
  • Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained..
  • Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations..
  • On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock