Top Solder Fluxes Reviews

Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering 8 Oz Half Pint

• Includes: one half-pint (8 fluid ounces within a spray bottle).
• Yellow-green and self-pickling, it is the best in water-based fluxes.
• Use this hard flux on Gold, Silver, Platinum, and other metals with high melting point.
• The benefit of liquid flux is that its transparency will let you see the solder joint more clearly when soldering and the liquid flows better in....

Litorange 2 PCS Lead Free Brass Construction 1/2' by 1/2-Inch Female Threaded PEX Pipe Barb FNPT Swivel Elbow Plumbing Connection Crimp Fittings

• ★ Lead Free Compliant Brass. Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents..
• No Flames, Glue, Fluxes, or Solvents Needed. Approved to be used underground and behind walls without access panels.
• etc. Certified for use in potable water applications..
• ★ Resists corrosion and mineral buildup, rust, and freeze damage. Suitable for new or retrofit construction and for hot or cold water distribution..
• ★ Package include: 2 PCS 1/2" PEX elbow fitting..

Weller WSA350 120v Bench Top Smoke Absorber

• Great for workspaces using more active fluxes.
• Removes flux fumes from soldering workbench.
• Fumes are absorbed by the replaceable carbon-activated filter.
• Includes one replacement filter (WSA350F), ESD safe.
• Fan is quiet and will not add significant noise to the workspace.

LA-CO 22302 High Heat Resistance Silver Brazing Flux Paste, 1000 to 1700 Degree F Temperature, 2 oz

L & R #566 Ultrasonic Non-Ammoniated Watch Cleaning Solution - 1 Gallon Jug

• Electronics and fine optics cleaner, mildly alkaline. Rinses residue free.
• Parts to be cleaned: electronics, printed circuit boards, electromechanical components, glass, ceramics, plastic parts and optics.
• Contaminants to remove: polishing suspensions, grease, oil, fluxes, spilled liquids, water damage, fingerprints, dust.
• Dilute with water to 3-10 percent before use.

MG Chemicals 4140A Flux Remover for PC Boards, 1 Quart Bottle

• Use when a general-purpose zero residue flux remover is required.
• Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues..
• Suitable for use in food facilities as a Non-Food Chemical Canadian and NFS recognition letters available on request.

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

• ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
• ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
• ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
• ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

• 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
• 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
• 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
• 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

• 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
• Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
• 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
• ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..

Elmasonic 800 0102 Elma TEC Clean A1 Ultrasonic Cleaner Solution Concentrate for Electronics and Optics- Powerful Cleaning Fluid for Industrial Use

• Electronics and fine optics cleaner, mildly alkaline. Rinses residue free.
• Parts to be cleaned: electronics, printed circuit boards, electromechanical components, glass, ceramics, plastic parts and optics.
• Contaminants to remove: polishing suspensions, grease, oil, fluxes, spilled liquids, water damage, fingerprints, dust.
• Dilute with water to 3-10 percent before use.

Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack Desoldering Pump Soldering Sucker Tool

• UNPARALLELED SUCTION POWER - Good little solder sucker, have a good bit of suction,you can just hang onto it and use your thumb to reset and suck. The ideal tool for intricate soldering jobs..
• ONE-HANDED OPERATION - Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily. Say goodbye to tedious two-handed solder extraction and .quickly and easily removing solder.
• DURABILITY AND LONGEVITY - Very sturdy,will worke good to remove existing solder from a circuit board. Made with high-quality materials and designed to withstand heavy usage, our Solder Sucker ensures longevity and performance, saving you time and money in the long run..
• ERGONOMIC DESIGN - Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. The comfortable, non-slip handle and lightweight body make our Solder Sucker easy to handle, ensuring maximum control and precision..
• VERSATILE APPLICATIONS - A must have excellent solder sucker which fits nicely in your tool box. Our solder sucker desoldering pump is not just limited to soldering. It can also be used for desoldering, removing hair, lint, and dust, and even for cleaning delicate electronics. The ultimate multi-purpose tool for any DIY enthusiast..

3 Pcs Solder Sucker Desoldering Vacuum Pump Solder Removal Tool

• 【High Quality and Powerful Sunction】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively and you can use your thumb to reset and suck..
• 【One-Handed Use Design】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
• 【 Sturdy and Perfect Tool】Worke good to remove existing solder from a circuit board, heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering..
• 【Great Solder Removal Tool】 The solder sucker can be used for broad place, a must have excellent solder sucker which fits nicely in your tool box..
• 【Lifetime Satisfaction Guarantee】If you're not happy we're not happy! If we can't make it right and you are not satisfied for any reason, we will gladly and promptly refund your purchase price. We promise! Click "Add to Cart" now..

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

• 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
• 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
• 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
• 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
• 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..