Top Socket 115cpu Reviews

huayu for Cooler Master Ultra-Quiet A12025-12CB-3BN-F1 12cm 12025 12V 0.16A 3-Wire Host Computer Cooling Fan

• Supports Intel Socket 130W LGA20XX/LGA1366/LGA115X/LGA775 and AMD Socket 125W AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1.
• 4 sintered powder heatpipes directly touch the CPU surface.
• Extra fan clips provided allow adding a second fan.
• Can be easily installed without moving the motherboard.

ARCTIC Freezer 11 LP - 100 Watts Intel CPU Cooler for Slim PC Cases, Intel LGA 1700, Ultra Quiet 100 mm PWM Fan, pre-Applied MX-4 Thermal Compound

• GOOD COOLING PERFORMANCE: A 100 mm PWM fan, 50 fins, 2 copper heatpipes in combination with pre-applied MX-4 thermal compound provide good cooling performance and improve heat transfer from the CPU.
• VIRTUALLY SILENT: Its low noise impeller and patented fan holder ensures the fan to work quietly even under full load, thanks to the PWM control, the fan speed adjusts according to the CPU temperature and thus the noise level remains at a minimum.
• SLIM AND LIGHTWEIGHT: With a height of only 55 mm and the capability to draw air in from the side, the Freezer 11 LP is an extremely slim CPU cooler that fits into every HTPC and low profile computer.
• WIDE COMPATIBILITY: The Freezer 11 LP features wide compatibility with Intel sockets, its simple mounting system is designed to fit most of the current CPU platforms.
• compatible with Intel Socket 1700, 1200, 115x.
• QUICK INSTALLATION: The unique mounting system via push pins offers excellent stability and is applicable within minutes, thanks to the pre-applied ARCTIC MX-4 thermal compound, a quick and clean installation is guaranteed.

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

• 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
• 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
• 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
• 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
• 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Pccooler E126M B Low-Profile CPU Cooler Moonlight Series | SilentPro PWM CPU Fan 120mm with Corona LED Blue Frame | Turbocharged Design | All-Round Cooling for Computer PC Case, Intel, AMD Series

• ...gn】Aluminum heatsink with fin compressed design and larger heat dissipation area for more cooling. The compacting process allows each fin to be in intimate contact with the CPU for rapid heat dissipation and more cooling. Support up to 92W TDP Processor, provide excellent heat dissipation..
• 【Compatible with AMD Socket AM4 / Intel LGA 115X Platform】Aluminum integrated push-down cpu cooler provides excellent cooling for the CPU and memory, also suitable for small computer case. Supports Intel LGA / 1150 / 1151 / 1155 / 1156 / 775 and AMD AM4 / FM2+ / FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 cpu compatibility. If you install the cpu cooler on the AMD platform, no need to install any brackets, please install it directly on the motherboard..

2U Server CPU Cooler Copper Skiving Heatsink Cooling Fan for Intel Xeon LGA 1150 1151 1155 1156 Industrial Computer Cooling

• CPU Socket: Intel LGA 115X (1150 1151 1155 1156).
• Application platform:Intel Core i7-2600, i5-2500 series ,Intel Core i3& i5,Xeon Processor 3400 Series.
• Full Size :89mm x 89mm x 50mm / Mounting hole distance:75mm x 75mm.
• Heatsink Material:Copper / Heatsink processing technology:skiving fin.
• Cooling fan:7020 cooling fan,DC 12V,dual ball bearing ,4pin with PWM / Speed Reference:4300RPM.

AORUS WATERFORCE X 360 AIO Liquid CPU Cooler, Rotatable Circular LCD Display with Micro SD Support, 360mm Radiator with 3X 120mm Low Noise ARGB Fans, Compatible with Intel LGA1700

• New high performance pump efficiently dissipates heat from high end CPUs..
• Unique 60x60mm circular full color LCD, video play/ custom text support..
• Adjustable screen orientation can be rotated 330 degrees..
• High performance, low-noise level, Graphene Nano Lubricant ARGB fans..
• Supports RGB FUSION 2.0 synchronization with other AORUS devices & Universal design for fan & pump RPM control, supports all MB brands..
• Supports Intel 2066, 2011, 1366, 115x, 1200, 1700 CPU Socket Motherboards.
• Supports AMD TR4, AM4, sTRX4 Socket Motherboards.

Thermalright Peerless Assassin 120 SE CPU Air Cooler, Dual Tower 6 Heat Pipe, Dual 120mm TL-C12C PWM CPU Fan, for AMD AM4/Intel LGA 1700/1150/1151/1200, AGHP Technology, Aluminium Heatsink Cover

• CPU socket support: Intel：115X/1200；AMD：AM4.
• Custom 155mm Height PWM fan for excellent cooling and low noise.
• Massive heatsink(125mm*135mm*155mm) constructed with 6 x 6mm heatpipes and copper base to maximize heat transfer and dissipation from CPU.

Supermicro Motherboard Micro ATX DDR4 C7Z170-M-O

• 64GB Unbuffer Non-ECC UDIMM, DDR4-3200MHz (OC), in 4 DIMM slots.
• 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4, 1 PCI-E 3.0 x1.
• Intel Z170 Express controller for 6 SATA3 (6 Gbps) ports.
• RAID 0,1,5,10 + 1 PCIe M.2(PCIe x4, 2260/2280/22110)(No Raid Support).
• Single LAN with Intel single Ethernet PHY i219V.
• Intel 6th Generation Core i3 series/Core i5 series/ Core i7 series, Socket H4 (LGA 1151) supported.
• 6 USB 3.0 ports (4 rear + 2 via header), 4 USB 2.0 ports (2 rear + 2 via headers),2 USB 3.1 (10 Gb/s) ports(Headers).

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

• Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
• Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
• Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
• Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
• This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
• Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).

XBERSTAR CPU Cap Opener for 3770K4790K 6700K E3-1230 7700K 8700K 115x Interface CPU Decrimper

• Please look at carefully before order.thanks!Type: Industrial Computer Accessories..
• Model Number: 3770K4790K 6700K E3-1230 7700K 8700K 115x..
• All alloy metal materials,surface spray processing , hard and not easy break , can completely replace bench vice , suitable intel 115x series CPU opener ( seven generations U Such as 7700K ).
• High compatibility with Intel processors,easy quick and safe method to delid your Intel CPU.
• Packing include:1 set CPU Decrimper.If you have any problem,please let us know,we will help you,thanks..

HP Compaq SOCKET 775 MOTHERBOARD 441418-001 441449-001 for XW4600 TOWER

Longdex CPU Cap Opener CPU Heatsink Delid Tool to Remove Cover for

• Applicable model: 3770K 4790K 6700K E3-1230 7700K 8700K 115x interface..
• Alloy metal material, surface spraying treatment, hard and not easy to break, can completely replace bench vise, suitable for intel 115x series CPU lid opener (7700K, such as the seventh generation U)..
• The CPU is clamped back and forth by rotating the screw rod to push the slider (the CPU cannot be moved after clamping, do not worry about it will shake), and the top cover and the substrate can be separated horizontally by the front and back clamping force. There is no force on the left and right sides of the top, bottom, and all lid openers are based on this principle. They are all violent lid openings..
• Steps to use the lid opener (before opening the lid, you can use a hot air blower to heat the top cover of the CPU to soften the glue, which makes it easier to open. Like some 6700K 7700K, it sticks very tightly. It is especially necessary to heat the top cover to soften the glue..
• Packing quantity: 1PC base, 1PC slider, 1PC screw rod, 1PC hexagon wrench..

Fuma 2 Rev.B CPU Air Cooler, Intel LGA1700, LGA1151, AMD AM4/Ryzen 120mm, Dual Towers, Black Top Cover

• Award-Winning Twin Tower Cooler, dual heatsinks and fans accelerate and enhance heat dissipation for top-tier high performance. 6 x 6mm heatpipes and copper plate base ensure heat from CPU and drop temps. Ideal for mainstream, gaming PC, even overclocking with high TDP processor(12900K, 12700K, 11900K, 11700K, 10900K, 10980XE, 9900k, 9700k, 9600k,3700x).
• Asymmetrical design allows unrestricted use of any front high RAM slot, and cut-out fin design gives highly clearance(55mm) of rear RAM slot(LGA2011/2066). Standing only 155mm tall, the cooler fits most PC case on the market..
• Using Kaze Flex II 120mm quiet fan(Fluid Dynamic Bearing), FUMA2 Rev.B uses two different thickness(25mm & 15mm) PWM fans rotating in opposite direction. This generates higher static pressure as well as stable airflow thus pushing cooling performance to maximum while keeping silent operation. Addition fan clips is included to add 3rd fan..
• Premium HPMS IV provides Fuma 2 Rev.B with easy-to-install experience and highly secure for CPU cooler socket INTEL LGA 1700 / LGA1200 / LGA115x / LGA2066 / LGA2011(V3) AMD AM4 / AM3(+) / AM2(+) / FM(+) / FM1.