Top Snap On Rear Axle Puller Sets Reviews

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

CRAFTSMAN V20 Cordless Hammer Drill Kit, LED Light, With 2 Batteries and Charger (CMCD711C2)

  • VERSATILITY: 10 PC kit is designed for a wide range of puller applications including wheel hubs, axles, oil seals, bushings, and more.
  • INCLUDES: 2 & 3-jaw internal and external pullers, rear axle puller, locking plier adaptor, and hook and dent puller.
  • Included case provides convenient storage.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...emove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating flui....
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

4 PCS - 2\ Inch x 8 ft Flexible Axle Tie Down All in One Combo Strap with Snap Hook Ratchet 3,300 lbs Safe Working Load - Haul Car, Race, Truck, ATV, UTV SUV Polyester UV Resistant

  • ...bing Material: Hi-Gear Axle Ratchet Tie-Down Straps are made of Polyester Webbing Material and Hi-Test Webbing Protects you from shock during transportation. Polyester Webbing Material is very Soft, Pliable, good heat resistance, good moisture absorption. It is also less susceptible to wear and tear..
  • ⭐Secure Flat Snap Hooks: Hi-Gear Axle Ratchet Straps include Ratchet Buckles, have Flat Snap Hooks on both ends. These Extra-strong Snap Hooks mate easily with axle strap D rings and anchor points on your deck, provides you the most secure connection and you won't lose strap. The snap hooks include spring loaded latches for extra safety..
  • ⭐Strap Size, Break Strength, and Durability: Hi-Gear 2 inches Wide and 8 feet Long axle straps are very Strong and Flexible. And Minimum Breaking Strength of Hi-Gear Flexible Axle Tie-Down Ratchet Straps is 3300lbs. Axle Straps have excellent durability and long service life..
  • ⭐Heavy Duty Axle Straps For Car Trailer: Auto Haulers can use our heavy duty Hi-Gear Axle Tie-Down Straps to create securement around the car's front or rear axles for towing or tie-down purposes. Axle Straps are a must when securing a vehicle for transport by the axle or through the rims..
  • ⭐Won't Scratch Or Damage: Our Hi-Gear Axle Straps ar....
Check Stock

VCT 23" Long 5lb Slide Hammer Inner CV Joint Puller

  • The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
  • The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
  • Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
  • The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check Stock