Top Smd Chip Tantalum Capacitor Reviews

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

eBoot 30 Pieces Photoresistor Photo Light Sensitive Resistor Light Dependent Resistor 5 mm GM5539 5539

  • This 0603 (0.06inch*0.03inch/1.6mm*0.8mm) SMD Resistor/Capacitor mixed practical kit is specially designed to cover the most common resistance/capacitance values.See the Product Description for the specific resistance and capacitance values..
  • Beginner hobbyists and veteran electronics experts alike will appreciate the variety and organization of components included with this kit..
  • It looks like a book,so we call it a sample book.Book cover is 7.6*5.4 inches(L*W), just the same size as an ordinary book. Small but put everything in its place. It saves space and is easy to carry..
  • Resistors: RC0603 JR-07 0603(1.6mm*0.8mm) ±1% 1% (0R-4.7MR) 65values 3075pcs serial resistor,RoHS Compliance..
  • Capacitors: GRM188 0603(1.6mm*0.8mm) ±5% and ±10% 17values (15pF-2.2uF) 725pcs SMD Capacitor,RoHS Compliance..
Check Stock

Micro Component Island

  • Up for sale is a brand new meter clip probe for SMD components measure..
  • This clip probe is suitable for resistor, capacitor or other SMD components..
  • It is one of the convenient tool that you need for your electronic work..
  • Maximum voltage: 250V. Open clip distance: 10mm..
  • Protective caps for probe tips. 15mm plug insertion depth..
Check Stock

2900 pcs SMD 1206 0805 0603 Component Assortment Resistor Capacitor Diode Transistor OpAmp IC Solder PCB SMT Soldering Assorted Kit

  • Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit.
  • 1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED.
  • Everything comes in a compact case and very handy.
  • 13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB.
  • Includes a training dummy PCB with 70 components, practice your soldering skills.
Check Stock

GIGABYTE Z690 UD AX DDR4 (LGA 1700/ Intel Z690/ ATX/ DDR4/ Triple M.2/ PCIe 5.0/ USB 3.2 Gen2X2/ Type-C/WiFi 6/2.5GbE LAN/Motherboard)

  • Intel LGA 1700 Socket: Supports 12th Gen Intel Core Series Processors.
  • DDR4 Compatible: Dual Channel Non-ECC Unbuffered DDR4.
  • Sturdy Power Design: 16+1+2 Digital VRM Design with 60A Power Stage with Tantalum Polymer Capacitor.
  • Comprehensive Thermal Design: Ultra performance VRM Heatsinks.
  • Next Gen Connectivity: PCIe 5.0, Triple NVMe PCIe 4.0 x4 M.2, SuperSpeed USB 3.2 Gen 2x2 Type-C.
  • Fast Networking: WiFi 6 802.11, 2.5GbE LAN, BT5.
  • Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU.
  • Only Compatible with Intel LGA1700 Cooling Brackets.
Check Stock

EEEEE 61 Values (Pack of 1095) 1% 0.25w Resistor Book kit, 1Ω-10MΩ RoHS Compliant for Arduino, Assorted resistors Set, Assortment ohm Pack (Ω, K, M)

  • This kit Includes 3638pcs of the most important and useful SMD 1206 0805 0603 Component. Would be a great gift for a family member or friend who tinkers with electronics..
  • 1980PCS 1/4W 1% SMD Resistor. 960PCS 10pF-22uF SMD Capacitor, 300PCS SMD LED, 35PCS PCB board patch to in-line adapter board, 13PCS 3362P adjustable potentiometer, 280PCS SOT-23 Transistor, 70PCS SMA Diode..
  • 100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
  • All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
  • The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..
Check Stock

Gigabyte Z690 UD DDR4 ATX Motherboard - Supports 12th Gen Intel Core Processors (LGA 1700), DDR4-5333MHz(OC) Memory, 2.5GbE LAN, 1x PCIe 5.0 x16 Slot, 3X NVMe PCIe 4.0 x4 M.2 & USB 3.2 Gen 2x2 Type-C

  • Supports 12th Gen Intel Core Series Processors.
  • Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs.
  • Direct 16+1+2 Digital VRM Design with 60A Power Stage (maximum based on VCORE phase) and Tantalum Polymer Capacitor​.
  • 3 x Ultra-Fast NVMe PCIe 4.0 x4 M.2 with Enlarged Thermal Guard.
  • SuperSpeed USB 3.2 Gen 2x2 TYPE-C delivers up to 20Gb/s transfer speeds.
Check Stock

Aexit 200Pcs 1206 Fixed Resistors 3.2x1.6mm 220 Ohm 1/4W SMT Surface Mount Resistor Chip Arrays Chip Resistors

  • Size : 3.2 x 1.6 x 0.55mm / 0.13" x 0.06" x 0.02"(L*W*T).
  • Package Content : 200(±2%) Pcs x SMD Chip Resistor.
Check Stock

100pcs 1206 100NF X7R Error 10% 50V 0.1UF 104 1206 SMD Capacitor

  • 100pcs 1206 100NF X7R Error 10% 50V 0.1UF 104 1206 smd capacitor.
Check Stock

100pcs 1206 100nF 104K 0.1uf 250V X7R Error 10% SMD Ceramic Capacitor MLCC

  • 100pcs 1206 100nF 104K 0.1uf 250V X7R Error 10% SMD ceramic capacitor MLCC.
Check Stock

Treedix 2PCS Multifunctional PCB Ruler 3inch Measuring Tool Color Wavelength, Schottky Diode, Zener Diode Resistor Capacitor Chip IC SMD Diode Transistor for Electronic Engineers Printed Circuit Board

  • 【Multi-function ruler】These two multi-function rulers integrate relevant information of PCB design, such as angle gauge, color wavelength, Schottky diode, Zener diode, BJT NPN, current and voltage formula, unit conversion, inch fraction Conversion.
  • the other measuring ruler has angle gauge, device, IC pin pitch meter, resistance capacitor chip package.
  • 【Simple identification】It is very useful for identifying the size of SMT/SMD components, BJT NPN, BJT PNP, etc. The ruler provides you with a straight line centimeter mark and an inch mark.
  • 【Excellent quality】Double-sided gold-plated, practical and lightweight, can be placed in a card holder and carried with the sound, it is a standard multi-function ruler for electronic engineers.
  • 【Professional accuracy】: The scale of the printed circuit board is 3 inches, which brings you accurate and professional accuracy. It is also a measuring tool with necessary functions that electronic enthusiasts urgently need in the design process..
  • 【After-sales service】: Our scale has undergone strict quality inspection, if you have any questions, please feel free to contact me, I believe our caring service will make you satisfied.
Check Stock

SMT Capacitor 0603 Sample Book, 4500 Complete Sets, C0603 Capacitor Models are Complete and Suitable for a Wide Range of Applications,170 Kinds of Resistance, 90 Models, Each Model 50pcs

  • It looks like a book,so we call it a sample book. Just the same size as an ordinary book. Small but put everything in its place. It saves space and is easy to carry..
  • Clear label on the front and on the back of every paper taping, never mixed up..
  • Beginner hobbyists and veteran electronics experts alike will appreciate the variety and organization of components included with this kit..
  • This SMD Resistor/Capacitor/Inductor kit is specially designed to cover the most common resistance/capacitance values of the most common resistor/capacitor/Inductor types..
Check Stock

BTT SKR Pico V1.0 3D Printer Control Board with TMC2209 Stepper Drive Onboard A Motherboard Specially Customized for VORON V0 V0.1 3D Printer Suitable for Raspberry Pi Using Kilpper Firmware

  • 【VORON V0 V0.1 customized motherboard】BIGTREETECH SKR PICO control board is specially made for VORON 3d printer, using Raspberry Pi (Raspberry Pi)....
  • 【Silent printing, noise reduction】 SKR PICO V1.0 has onboard TMC2209 silent stepper driver, UART mode, no external driver required, easy to use.....
  • 【Heat dissipation upgrade】 BTT SKR PICO V1.0 adopts a new design heat sink to enhance heat dissipation and aesthetics.
  • 【New design:】SKR PICO SMD capacitor (MLCC) adopts Murata capacitor.
  • fuse is in the form of fuse holder + fuse, which is easy to disassemble.
  • 【Temperature sensor interface】 TH0, THB, 2-way 100K NTC (thermal resistance) and Raspberry Pi (Raspberry Pi) communication interface: TYPE-C,....
Check Stock