Top Slow close Lids Reviews

Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

Spectrum Metal Bloom Over the Cabinet Lid Organizer (Chrome) - Storage for Kitchen, Cabinet, Pantry, & Under Sink Organization

  • BEAUTIFUL BLOOMING DESIGN: Inspired by the blooming flowers in spring, this design will add of freshness to your kitchen countertop. This countertop organizer will bring the beauty of blooms and the refreshing feeling of new growth into your kitchen..
  • STORE LIDS EASILY: The kitchen organizer’s unique design securely accommodates up to four lids with round knobs or handles. The cabinet organizer features rubber feet that minimize rattling while doors are used..
  • AVOID INSTALLATION: Add extra storage without all the hardware. Padded brackets slide easily over cabinet doors for quick, no fuss installation. No tools required. Perfect for apartments, rental homes, or RVs..
  • DURABLE CONSTRUCTION: The sturdy steel construction withstands kitchen wear and tear and heavy use. The durable metal brackets do not bend for stable support of lids to your pots, pans, slow cookers, rice cookers, and more..
  • DIMENSIONS & CARE: 7" L X 6.25" W X 20" H.
  • to clean, wipe with a damp cloth and towel dry. Do not place in the dishwasher. Cabinet shelves may obstruct cabinet door from proper....
Check Stock

VOCOMO Toy Box Hinges Safety Lid Support Soft Drop Lid Support Soft Close Lid Hinge for Cabinets Kitchen Chest 40lb/2pcs

  • Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. The weight of the lid cannot exceed....
  • 360 degree random stay - Adjust the lid opening angle, and keep it stay in place at different angles without time limit. It will not slam shut when....
  • Adjustable tension - Adjust tension with Allen wrench to fit for lids with different weight. After installing the hinge, please tighten the mechanism....
  • Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! We provide installation instructions for....
  • No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service..
Check Stock

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on..
  • SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°..
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs..
  • DURABLE HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical..
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions..
Check Stock

VOCOMO Heavy Duty Lid Support Hinges Safety Folding Lid Stay Hinge with Soft Close for Cabinet Kitchen Chest Wardrobe Toybox 50lb/2pcs

  • Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. The weight of the lid cannot exceed....
  • 360 degree random stay - Adjust the lid opening angle, and keep it stay in place at different angles without time limit. It will not slam shut when....
  • Adjustable tension - Adjust tension with Allen wrench to fit for lids with different weight. After installing the hinge, please tighten the mechanism....
  • Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! We provide installation instructions for....
  • No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service..
Check Stock

30 inch-pound Lid-Stay Torsion Hinge Rustic Bronze 2 per Pack

  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check Stock

Elite Platinum EWMST-325 Triple Slow Cooker Buffet Server, Adjustable Temp Dishwasher-Safe Oval Ceramic Pots, Lid Rests, 3 x 2.5Qt Capacity Stainless Steel

  • Three removable 2.5 quart oval stoneware pots with power indicator light and powered at 405 watts.
  • Individual cooking controls with LOW / HIGH / WARM settings.
  • Specially designed tempered glass lids rests for convenient serving.
  • Slow cook and serve immediately without transferring.
  • Non-skid rubber feet keeps slow cooker in place safely and convenient cord storage.
  • Three removable 2.5Qt oval stoneware pots.
  • Specially designed lid rests for convenient serving.
  • Non-skid rubber feet keeps slow cooker in place safely.
Check Stock

SafeStay Lid Stay 105 Degree Open with Soft Close, Easy to Install, Lid Support for Toy Box and Chest

  • GENTLE SLOW CLOSE DESIGN - Lids will lower slowly and gently to avoid crushing even the smallest of fingers..
  • HOLDS LID OPEN - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close..
  • SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle..
  • EASY INSTALL INSTRUCTIONS - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side..
  • 100% MONEY-BACK GUARANTEE - If for whatever reason you are unhappy with the product we will refund you, no questions asked!.
Check Stock

VOCOMO Soft Close Lid Support 250N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs 2 Pack

  • Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers..
  • 250N heavy duty gas struts - A 250N heavy-duty gas struts may be supported maximum 45lbs lid and gently lowered.
  • Lid stay 105 degree open with soft close - The lid stay allows the lid to open at a maximum 105 degree angle..
  • Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the....
  • No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service..
Check Stock

Henry Purcell: Funeral Sentences

  • ... and 9 matching Locking lids. Rectangle L（35.5OZ）*2 + M（21.6OZ）*2，Square L（27OZ）*2 + S（10.8OZ）*3. This glass bento box was designed with nesting, so the smaller containers fit inside the larger containers for ease of storage(S can be put in M size, M can be put in L size), save your space..
  • EASY TO CLOSE--Are you still confused about the difficulty of closing the snap，The 9 locking lids are very easy to close, you don't need to leave the table and hold it by hand and then close it,only needs five fingers to close it tightly .Because this lid is highly compatible with the high-borosilicate glass, it is not only easy to close but also more airtight..
  • OVEN/MICROWAVE/FREEZER/DISHWASHER SAFE-from -40℃/-40℉ in freezer to 400℃/752℉ in oven, safe for oven, microwave, dishwasher and freezer .The lids are not oven or microwave safe,please remove the lids before heating and cooking food.It's safe to wash the lids in the dishwasher, but high temperatures over a long period of time can deform the silicone sealing strip at the edge of the lid. Please wash the lids by hand as much as possible..
  • BPA FREE - The Glass Storage Containers are BPA Free, and made out of high-borosilicate glass for easy heating and durability. non-porous glass, Fre....
Check Stock