Top Slotted Hex Head Anchor Reviews

CONFAST 1/4" x 1-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)

  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • SLOTTED HEX HEAD-Can be driven with a nut driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

AMERIMAX HOME PRODUCTS 33047PK 7-Inch Screw/Ferrule, White, 10-Pack, Set of 2

  • Amerimax 7 in. Gutter Screw w/Ferrule - 10 per pack (pack of 2).
Check Stock

Traxxas Tool Kit

  • Traxxas 3415 - Tool Kit Pouch, Hex Nut Drivers, Screwdriver, Wrench.
  • Includes: (1) Carrying Case (1) Wrench (1) Driver handle (5) Nut Drivers (6) Hex Drivers (3) Philips Head Screwdrivers (3) Flat Head Screwdrivers.
  • Specs: Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm Nut Drivers: 4mm, 5mm, 5.5mm, 7mm, 8mm Slotted Screwdrivers: 2mm, 4mm, 5mm Philips....
  • Part number(s) included (in factory packaging): 3415.
Check Stock

Phillips AR Grip Screw Replacements with Exterior Lock Washers - Set of 4 - Zinc Plated Steel

  • Hex Key Size: 3/16", high grade zinc plated steel tooth lock washers included.
  • Great replacement for slotted / hex screw on rifle platforms.
  • Compatible with A2 and aftermarket including B5, BCM, Ergo, Hogue, and Magpul grips.
  • All screws, packaging and material made to last!.
Check Stock

Phillips AR Grip Screw Replacements with Interior Lock Washers - Set of 4 - Zinc Plated Steel

  • Hex Key Size: 3/16", high grade zinc plated steel tooth interior lock washers included.
  • Great replacement for slotted / hex screw on rifle platforms.
  • Compatible with A2 and aftermarket including B5, BCM, Ergo, Hogue, and Magpul grips.
  • All screws, packaging and material made to last!.
Check Stock

10pcs 50mm Slotted Screwdriver Bits Set, Magnetic Flat Head 1/4 Inch Hex Shank,S2 Alloy Steel H6.3 * 50*SL6mm

  • Excellent Material：The Slotted Screwdriver Bits are made of S-2 alloy steel which is a commonly used material in hardware with high hardness.Magnetic head 100mm screwdriver bar using S-2 high quality steel, The Slotted Screwdriver Bits are made of S-2 alloy steel which is anti-impact and tough, great wear resistant. batch head surface for steel material color,from inside to outside are the same..
  • Exquisite workmanship, each edge can be accurately locked screws, no damage to the screw, and the screwdriver head.
  • Powerful Function：Strong magnetic,can suck the screws easily when used it.Magnetic bits can be firmly fixed on screwdrivers..
  • Wide Using Application：With 6.3mm(1/4inch) hex shank, Can be used for electric screwdrivers, hand screwdrivers, electric drills, air drills and other tool sscrew driver, drill, air and other tools..
Check Stock

15 Piece Slotted Phillips Triangle Screwdriver Bit Set, 1/4 Inch Hex Shank S2 Steel Magnetic 2 Inch Long Drill Bits

  • ▲Slotted Phillips Triangle Screwdriver Bit Set, Crafted with Heat-treated S2 alloy steel bits for increased torque and unmatched hardness..
  • ▲Strong magnetic, high precision. each edge can be accurately locked screws, no damage to the screw and the screwdriver head..
  • ▲Screwdriver bits sizes: Phillips Head: PH1 (3mm) / PH1(4mm) / PH2(4mm) / PH2(4.5mm) / PH2(5mm) / PH2(6mm) / 2piece *PH3 Slotted Head: SL3 / SL4 / SL5 / SL6 Triangle Head: ∆1.8 / ∆2.3 / ∆3.0.
  • ▲Fit for hand screwdrivers, electric screwdrivers, any 1/4 inch hex shank power drill..
Check Stock

REXBETI Slotted Phillips Screwdriver Bit Set, 1/4 Inch Hex Shank S2 Steel Magnetic 3 Inch Long Drill Bits, 12 Piece

  • Screwdriver bits in the following sizes: 2 piece * PH1 / 4 piece * PH2 / 2 piece * PH3 / 3mm (slotted) / 4mm (slotted) / 5mm (slotted) / 6mm (slotted).
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use.
  • Strong magnetic and high precision. each edge can be accurately locked screws, no damage to the screw and the screwdriver head.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use.
Check Stock

MulWark 20pc 1/4 Ultra Low Profile Mini Ratchet Wrench Close Quarters Screwdriver Set with High Torque - Right Angle EDC Tool with 90 Degree Mini Offset Reversible Drive Handle & Multi Hex Bits Set

  • ...ft for professional handymen and do-it-yourselfers.
  • this can also be transferred to a ratchet socket using an adapte.
  • ▲ 19pc POPULAR-SIZE BITS: Made of heavy duty CRV6150 (chrome vanadium) steel with hardness of HRC51-55, these bits include: - 6pcs 25mm (1”) driver bits: #1, #2, #3 phillips head bits.
  • -13pcs 20mm driver bits: 3mm, 4mm, 5mm, 6mm hex head bits.
  • T15, T20, T25 security torx star screwdriver bits.
  • coming with a cartridge as a good screwdriver bit organizer.
  • ▲ LIFETIME WARRANTY: All MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement.
Check Stock

21PCS 1/4 Mini Ratchet Wrench Set Low Profile - High Torque Offset Close Quarters Ratchet with S2 Screwdriver Bits, Micro Right Angle EDC Tool with 90 Degree Reversible Drive Handle and Multi Hex Bit

  • ...ft for professional handymen and do-it-yourselfers.
  • this can also be transferred to a ratchet socket using an adapte.
  • ▲ 19pc POPULAR-SIZE BITS: Made of heavy duty CRV6150 (chrome vanadium) steel with hardness of HRC51-55, these bits include: - 6pcs 25mm (1”) driver bits: #1, #2, #3 phillips head bits.
  • -13pcs 20mm driver bits: 3mm, 4mm, 5mm, 6mm hex head bits.
  • T15, T20, T25 security torx star screwdriver bits.
  • coming with a cartridge as a good screwdriver bit organizer.
  • ▲ LIFETIME WARRANTY: All MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement.
Check Stock

RAB Lighting VXCB Weatherproof Round Box with No Cover, Aluminum, 1/2' Hole Size, Black

  • Green hex slotted washer head ground screw in pre-tapped hole.
  • Close-up plugs allow Philips or slotted screwdrivers for easy installation.
  • 1/8" thick weather seal gasket is closed cell foam rubber for long lasting seal that won't crumble or break.
Check Stock