Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver
WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
the Dual Flush Converter is a replacement to the existing flapper.
slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
the permafit silicone seal is also chlorine and chemical resistant and will not warp.
BEST-IN-CLASS: The Selectronic toilet flush valve by American Standard has a self-cleaning piston design that eliminates routine maintenance and....
FEATURES: Toilet flush valve has an integral wiper spring cleans the refill orifice with every flush.
American Standard toilet parts deliver reliable....
FLAWLESS DESIGN: This toilet flush valve has state-of-the-art electronics that prevent ghost flushing and a fully mechanical manual override button....
SIZE: The American Standard Exposed Selectronic toilet flush valve is capable of meeting ADA requirements when installed under a grab-bar that is....
INCLUDES: American Standard toilet flush valve also includes a 8-year CR-P2 lithium battery installed.
Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White
WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White
WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White
WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly
Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
✅ HIGH QUALITY: The toilet urinal flush valve is made of brass material, structural , plated finishing, stable performance, Durable and Solid Structure..
✅ AUTOMATIC TOUCHLESS FLUSH: No need to touch any part of the flusher after urinating. The entire flushing process is mechanically controlled by the sensor, which is suitable and sanitary. The flushing is thorough, no irregular smell is left, avoiding infection of the effectively..
✅ INTELLIGENT WATER-SAVING: The Urinal Valve sensor can control flushing according to the frequency of use, efficiently avoiding the waste of water resources..
✅ LOW CONSUMPTION: The toilet flush valve need low energy consumption, which is powered by 4 AAA batteries, and no need for external power supply..
✅ WIDELY USED: The toilet urinal flush valve exposed wall mounted, provides maximum water conservation and financial savings..
Fluidmaster 400AKRP10 400AKR Universal All in One Toilet Repair Kit, 2 inches, Easy Install
RESTORES OVERALL TOILET PERFORMANCE: All in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new..
UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger.
HIGH PERFORMANCE FLAPPER: PerforMAX high performance 2-inch adjustable water-saving toilet flapper maximizes water usage with each flush.
EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Fluidmaster 507AKP7 PerforMAX Universal High Performance 2-Inch Toilet Flush Valve Repair Kit with Gasket and Bolts
ENHANCES YOUR TOILET’S POWER: Toilet fill valve with bolts and gasket replaces old or inefficient fill valves to repair a leaking toilet tank and optimize flush performance.
UNIVERSAL DESIGN: Fill valve replaces any two-piece toilet flush valve and is ideal for use in 3.5 gallons per flush toilets.
CORROSION RESISTANT: The 502 2-inch flapper features corrosion/hard water-resistant materials.
EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White
TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
★【COMPLETE KIT FOR EASY INSTALLATION】: The rv flush valve has 1 set of 385314349 rv toilet water valve kit contains 1 RV toilet water valve, 2 new mounting screws and 2 stainless mesh filters for quick and easy fix.
★ 【LEAKPROOF DESIGN】: The 385314349 rv water valve kit allows you to fix your sticking valve and solve the overflow problem due to freezing and cracking. If your toilet water is too large, the kit will help prevent leaking toilet, lead-free brass cap means no leaks, seals and connectors on the valve ensures watertight.
★【100% WARRANTY】: The sealand rv toilet parts come with a 90 day manufacturer limited warranty back by Funmit, you can feel a 100% confident buy and enjoy a 24 hours pro tech online help any time.