Top Slide Out Supports Reviews

WEIZE Slide Out Support Jacks - 20.5'' to 38.5'' Slide Out Stabilizers for RV, Camper and Travel Trailer, Supports Up to 4,700 lbs, 2 Pcs

  • GREATER STABILITY - The slide out supports save wear and tear on slide outs by reducing sag, can effectively solve the sagging and bending in the slide-out rails, and also help prevent costly slide out frame repairs. The support stands to help a little bit in the stability of the trailer. But please take note of the warning to "NOT" overtighten the support stands. This could cause damage to your slide out..
  • DURABLE - Heavy-duty steel and zinc powder-coating finish provide maximum strength and longevity for these rust-resisting RV slide out stabilizers. A new folding handle allows jacks in small compartments..
  • ADJUSTABLE DESIGN - The stabilizer jacks support 4,700 lbs. each and adjust from 20.5" - 38.5" H. The 5" dia. circular bases are stable on any surface and resist sink-in. U-shaped tops fit most slide-out frames..
  • EASY OPERATION - 2 per box, easy to operate, no assembly required. From the lowest setting, use the folding handle to raise the bracket slowly to meet the RV slide out supports bars. It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface..
  • WARRANTY - WEIZE aims for quality followed up with quality customer service directly provided by the manufacturer. The item is ....
Check Stock

Drawer Slide Jig (New Version)

  • ...most any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides!.
  • The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer..
  • Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback..
  • The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them..
  • The Drawer Slide Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides fast, consistent results..
Check Stock

ROCKLER 865042 Drawer Slide Jig, Blue

  • ...e to be level, straight, and positioned properly, or the drawers won't operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
  • Smooth Positioning: The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
  • Incudes Two Brackets: The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too.
  • Easy to Use: Like other Kreg tools, this DIY drawer slide jig is designed to be intuitive for begi....
Check Stock

Camco 48866 EAZ LIFT Heavy Duty Slide Out Support | Adjusts from 19 -47 | Made with Rust Resistant Steel | Supports Up to 5,000 lbs Each | Includes 2 Supports

  • Protects slide out mechanism: Provides support to slide outs when extended.
  • Adjustable: Adjusts from 19-inches to 47-inches in height.
  • Unique Features: Universal fit top, space saving handle and tethered pin.
  • Durable Construction: Constructed of strong, rust-resistant steel.
  • Superior Strength: Each supports up to 5,000 lb. Includes: (2) supports.
Check Stock

Midwest Wabbitat Folding Rabbit Cage

  • Sets Up Complete in Seconds, No Tools Needed.
  • Unique Design Provides Versatile Top and Front Door Access.
  • Secure Slide Latch Allows for One-Handed Door Operation.
  • Easy to Slide Out and Clean Front Access Durable Plastic Pan.
  • 1/2 inch Grid Mesh Floor Supports and Hygienically Protects Rabbits Hocks.
Check Stock

Midwest Wabbitat Folding Rabbit Cage

  • Sets Up Complete in Seconds! NO Tools Needed! Approx 25"L x 19"W x 20" H.
  • Unique Design Provides Versatile Top and Front Door Access.
  • Secure Slide Latch Allows for One-Handed Door Operation.
  • Easy to Slide Out and Clean Front Access Durable Plastic Pan.
  • 1/2 inch Grid Mesh Floor Supports and Hygienically Protects Rabbits Hocks.
Check Stock

EVERIE Coffee Pod Holder Drawer Compatible with Keurig K Cup Pods (Holds 18 Pods)

  • Drawer is compatible with K-Cup pods. Drawer is with 3 lines, each line is for 6 pods..
  • Easy to take every pod, the end pod holes in each line is for 2 pods, very easy to put it or take out..
  • Smooth slide in or out. Strong frame does not bend over with coffee maker on top so no conflicts traps the slide..
  • 40 Lbs affordable weight on top while K575 with water fully filled is about 18 LBS. Solid frame supports the coffee maker and pods in perfect position..
  • Pre-shaped slots stop the coffee pods from falling over or getting stuck or being wobbly. Keep all yours pods in place and really organised.
Check Stock

Twin Sized TeePee bed Handmade in US

  • Easy to assemble instant foundation is a low-cost solution that provides perfect support for today's higher profile mattresses.
  • Strong and sturdy foundation supports today's heavier mattresses including Memory Foam and Latex beds and actually increases the mattress's longevity by preventing sagging.
  • High profile foundation is durable, noise free and supports all mattress types.
  • Folding mattress foundation can be easily folded back together for moving or storage.
  • Package delivers to your doorstep and fits easily through tight hallways or narrow stairwells.
  • just slide out of the packaging and unfold.
Check Stock

OneSpace Craft Station with Blue Glass Drafting Silver

  • Unique in that supplies won’t fall out when Raised to any angle.
  • Distinctively artist and draftsman friendly.
  • ample Blue tempered safety Glass work surface.
  • 2 easy slide out drawers for convenient storage.
  • removable single-slot and multi-slot supply trays on each side.
  • Measures 41.25 inches wide by 24 inches deep by 31.5 - 49.5 inches high.
Check Stock

OneSpace Craft Station with Blue Glass Drafting, Black

  • Unique in that supplies won’t fall out when raised to any angle.
  • Distinctively artist and draftsman friendly.
  • ample blue tempered safety glass work surface.
  • 2 easy slide out drawers for convenient storage.
  • removable single-slot and multi-slot supply trays on each side.
  • Measures 41.25 inches wide by 24 inches deep by 31.5 - 49.5 inches high.
Check Stock

Solstice 10' x 8' Convertible Slide Inflatable Dock - one Size

  • DOCK / SLIDE CONVERTIBLE: Featuring an adjustable step, this dock serves both as a rigid water platform and a slide for the kids! Simply tuck in the step to flatten and enjoy the traction-pad-covered space.
  • Position the step upwards to raise the slide,.
  • RIGID FEEL: Solstice's inflatable docks are not just any ordinary inflatable.
  • When inflated to their suggested 10-12 PSI, experience a lightweight, yet hard-feel surface - the applications are endless for these inflatable platforms.
  • EASY STORAGE: Inflatable drop stitch technology makes it incredibly easy to deflate, fold, and store back in the included bag - perfect to store in small spaces.
  • ADDED HANG-OUT SPACE: Simply inflate and tie to the back of your boat to extend your on-water real estate by an additional 80 square feet.
  • Perfect for lounge chairs, coolers, and hours of fun on the water! 6-8 person recommended capacity - supports sta.
  • UNMATCHED STABILITY: Measuring 10x8 feet, this platform is designed to fit multiple people comfortably.
  • Feel free to walk around, stand on the corners, and relax without needing to worry about flipping over.
Check Stock

Super Target Systems Steel Bullet Trap, 12" x 12", with Steel Backplate & Rubber Panel for .22 Short Caliber rimfire & Airsoft, BB's, Airgun Ammo

  • Innovative and the BEST design for ENVIRONMENT and SHOOTERS for all air gun and .22 LR caliber ammo.
  • Includes 1 self-healing ballistic rubber front panel, easy slide IN/OUT, that keeps most of the lead dust inside and supports the target mounting and also slows down the rounds..
  • Removable steel backplate, easy slide IN/OUT rubber panel..
  • Enclosed, keeps most lead fragments inside and reduced noise impact, environmentally friendly and SAFER for shooters.
  • Patent pending. Includes set of 10 high quality reactive targets with stickers. Comes assembled, ready to go. Size: 12" x 12" x 4", 17 LB. Rubber face replacement available on Amazon under under ASIN B07SXTDCQ5.
Check Stock

Accuride 3832C Full Extension Slide 8'

  • Hold-in detent to prevent drawer roll-out and bounce-back.
Check Stock